Universal Remote Control MX-800 Manuel utilisateur

Meet the MX-800

“The Ferrari of

Hand-Held Remotes”

With Wireless Whole House RF Automation!

The IR/RF MX-800 uses the successful combination

of LCD screen and hard button technology from the

award-winning MX-700 Infrared remote control

called the “Ferrari of Hand-Held Remotes” by

the editors of RemoteCentral.com. The MX-800

broadcasts radio frequency (RF) signals as well as

infrared (IR). Using the MRF-200 RF Base Station

the MX-800 can automate infrared A/V components

without pointing the remote at all, through walls,

floors and cabinet doors, indoors or outdoors.

No More Pointing – Radio Frequency

Operation Provides 50-100' Range Through

Walls and Doors, Indoors and Outdoors

RF Addressing Enables any MX-800 to

Control Up to 16 Equipment Locations

in One House

RF Routing Allows Independent

Control of a Media Room with

Identical Televisions or Identical

Components

Programs via MXEditor PC Software

Replaces Up to 20 Remote Controls

Extensive Automation Allows Up to

912 Macro Buttons with Up to

190 Steps Each

Ultimate Customization Optimum Ergonomics

MRF-200 Radio Frequency (RF) Addressable Base Station

MX-800/MRF-200 IR/RF Automation System

MX-800™

IR/RF Custom Programmed Remote

and MRF-200 RF Base Station

Power and Flexibility

Extensive Automation Using Macros

The powerful memory of the MX-800

offers up to 912 potential macro

buttons. Each of these macros can play

back recorded sequences of commands

that completely automate a complex

system with one button press. A macro

can record and play back up to 190 steps

with time delays between steps when

desired. For example: A single press of

the ON button could turn on the TV, the

Surround Sound system, and the Satellite

Receiver, then set the TV to the correct

Video Input, the Surround System to the

right Audio settings, and finish by selecting

your favorite Satellite TV channel.

Replaces Twenty Remote Controls

The MX-800 controls up to 20

components. Each of the 20 components

can be programmed with up to 4 pages

of LCD screens plus the 32 hard

buttons. The MX-800 allows the installer

to edit the text on each LCD screen

exactly as you prefer (up to 87 screens

with 870 text buttons are available).

Windows Based MXEditor PC Software

The MXEditor software contains over 1,500 “code sets” of

Brand/Models including hard to find and specific discrete codes

that allow for precise control of all system components.

MXEditor also has the ability to learn new commands

from other remote controls and to Live Update the IR

database over the internet, guaranteeing compatibility

with any component you may add to your system in the

future. MXEditor can also be used on a Mac, if the user

has a Windows 98, ME, 2000 or XP emulator.

One Hand Ergonomics Easier to Use than

Original Component Remotes!

The optimized layout enables you to naturally reach

both

the 5-way thumbpad and hard buttons to navigate

on-screen

menus and the critical Transport, Channel and Volume

controls. You’ll quickly discover that you prefer using the

MX-800 to control all the special features of your system

(especially personal video recorders, satellite receivers,

DVD players, surround sound receivers and digital cable

boxes). There will never be a reason to dig out the old

remotes again.

Simplicity via the

RF Base Station

Up to Sixteen Equipment Locations

Controlled from Any MX-800

Each MX-800 can be programmed to

operate equipment placed throughout

the house, by installing an MRF-200

base station at each location. It’s simple:

when you select a device located in the

home theater, the MX-800 talks to the

MRF-200 in that room. This makes

possible a dream come true! A macro

may be programmed to turn off all of the

televisions in the entire house with one

button press. Simply install an additional

MRF-200 base station at each television

location.

Control an Array of Identical TVs

The MRF-200 enables you to control up

to six identical televisions (or identical

VCRs, Satellite receivers etc.) by routing

your commands only to the TV you select

on your MX-800.The other identical TVs

will not receive operational commands.

Specifications

MX-800 Remote Control

RF Frequency: 418MHz

RF Range: 50 to 100 feet

IR (Line of Sight) Range: 50-60 feet

Weight: 8 oz. (with batteries)

Memory Capacity: 912 Macro Buttons of up to

190 Steps, more than 1500 IR Commands with

up to 87 Custom Labeled Screens.

Size: 9.0" x 3.0" x 1.3"

Batteries: Four AAA Alkaline batteries included

LCD Size: 1.4" x 2.1"

Memory Back-Up: smart flash memory back-up

system that will retain the programmed memory

for up to ten years, even with dead batteries.

Warranty: One year Parts and Labor

MRF-200 Base Station

Power Supply: 9V 300mA/110V 60Hz (included)

IR Flasher Line Outputs: 2.5mm Mono Mini Jack

RF Frequency: 418MHz

Size: 5 1/8" x 3.5" x 1.25" (4.5" antenna up)

Mounting Bracket and Six Emitter/Flashers

included

Warranty: One year Parts and Labor

trademark of Universal Remote Control, Inc. Entertainment Made Simple is a

trademark of Universal Remote Control, Inc.

One Touch Automation Everywhere!

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

MX-800/MRF-200

IR/RF Automation System

www.hometheatermaster.com

3. Self-adhesive “Flashers” affix to

the Infrared sensors on the front

panels of your components. The

Flashers relay commands to

components out of sight of the

MRF-200’s Front Blaster. The

Flashers plug in to the MRF-200’s

rear flasher line outputs via their

10 foot cables.

1. The MX-800 remote control sends radio waves in every

direction, so you don’t have to point the remote anymore.

2. The MRF-200’s built-in IR Front Blaster

sends commands to components in the

same cabinet space as the MRF-200.

Autres manuels pour MX-800

Table des matières

Autres manuels Universal Remote Control Télécommande

Universal Remote Control

Universal Remote Control UR4-P360SI Manuel utilisateur

Universal Remote Control

Universal Remote Control ONE FOR ALL 9800CMN Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DCT Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Manuel utilisateur

Universal Remote Control

Universal Remote Control Automator URC-200 Manuel utilisateur

Universal Remote Control

Universal Remote Control RF30 MASTERCONTROL Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control PHAZR-5 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DCT Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR3 Manuel utilisateur

Universal Remote Control

Universal Remote Control PHAZR-5 UR5U-9000 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control OCE-0040A Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-800 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5-8400 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation