Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

STEP2 Press and hold the [DEVICE]

key for 5 seconds until the

Device LED will blink once

and stays on. Continue to hold

the [DEVICE] key and press

the number key assigned to

your brand in the Quick Set-

up Code Table and release

both [DEVICE] key and the

number key to save the code.

The Device LED will blink

twice to confirm that the code

is stored.

STEP3 Point the remote control at the

component.

STEP4 Press the power button. If it

turns off, it is programmed for

your component. If it does not

turn off, use the Pre-

Programmed 3-Digit code

Method or Scanning Method.

Repeat the steps above for all

components (CBL, TV).

B. Quick Set-up Code Tables

C. Manual Programming

Manual Programming

The remote control can be programmed

by entering a three-digit code number

that corresponds to particular brands

and models of equipment. The three-

digit code numbers are listed in the

code tables sections of this instruction

manual.

STEP1 Turn on the equipment that

you want the remote con-

trol to operate (Cable Box or

TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The corresponding device

LED will turn on indicating

that it is ready to be pro-

grammed. The LED will remain

on for 30 seconds. The next

step must be entered while

the LED is on.

STEP3 Point the remote control

toward the equipment and

enter the three-digit code

number assigned to your

STEP1 Turn on the equipment that

you want the remote control

to operate (Cable Box or TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The device LED will turn on

indicating that it is ready to

be programmed. The LED

will remain on for 30 seconds.

The next step must be enter-

ed while the LED is on.

STEP3 Press the [CH5] or [CH6]

button one at a time or keep

it pressed. The remote will

emit a series of Power

ON/OFF code signals. Release

the [CH5] or [CH6] button

as soon as the equipment

turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER]

button. The equipment

should turn back on. Then

try all of the functions on

the remote control (i.e.

volume, mute, etc.) to ensure

you have the correct code. If

any of the functions do not

operate as they should,

repeat the instructions from

STEP 3 above to continue

the Auto Search Method.

STEP4 Press the same [DEVICE]

brand from the code tables.

If there are more than one

three-digit number listed for

your brand, try one code

number at a time until your

equipment turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER] button.

The equipment should turn

back on. Then try all of the

functions on the remote

control (i.e. volume, mute,

etc.) to ensure you have the

correct code. If any of the

functions do not operate as

they should, repeat the

instructions from STEP 3

above using the next three

digit code number from the

brand list.

STEP4 Store the three-digit code

by pressing the same

[DEVICE] button once again.

The device LED will blink

twice to confirm that the

code has been stored.

D. Auto Search Method

If none of the three digit code numbers

assigned to your brand of equipment

works, or the code table does not list

your brand, you can use the Auto

Search Method to find the correct

three-digit code number for your

equipment by following steps:

Button Functions

Programming the Remote Control

Macro Button

For

future

use

Universal Remote Control, Inc.

www.universalremote.com

OCE-0082E Rev 08 (14/03/14)

UR2-211

Operating Manual

For Easy Clicker

This remote control is designed

to operate most Digital, Analog

Cable boxes, IPTV set top boxes

and TVs.

Introduction

Replacing Batteries

Before you program or operate the

remote control, you must install

two new AA alkaline batteries.

STEP1 Remove the battery com-

partment cover from the

back of your remote control.

STEP2 Check battery polarity

carefully, and install the

batteries as shown in the

illustration below.

STEP3

Replace the battery com-

partment cover.

*Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either

the CBL or TV button, depending on which device you are programming the remote to operate.

A. Quick Set-Up Method

(Refer to the Section B Quick Set-up table of codes)

STEP1 Turn on the component you want to program. To program your TV, turn on the TV.

0 PACE DTA

1 SA/CISCO, SAMSUNG, PACE DIGITAL

2 MOTOROLA DIGITAL

3 MOTOROLA DTA

4 EVOLUTION DTA

5 CISCO IPTV

6 ADB IPTV

7 TECHNICOLOR

8 AMINO 140/540 IPTV

9 MOTOROLA IPTV

Quick Number

Manufacturer/Brand

CBL

0 SANYO

1 SONY

2 SAMSUNG

3 LG

4 TOSHIBA

5 PANASONIC

6 PHILIPS

7 HITACHI

8 SHARP

9 VIZIO

Quick Number

Manufacturer/Brand

STEP2 Press and hold the [DEVICE]

key for 5 seconds until the

Device LED will blink once

and stays on. Continue to hold

the [DEVICE] key and press

the number key assigned to

your brand in the Quick Set-

up Code Table and release

both [DEVICE] key and the

number key to save the code.

The Device LED will blink

twice to confirm that the code

is stored.

STEP3 Point the remote control at the

component.

STEP4 Press the power button. If it

turns off, it is programmed for

your component. If it does not

turn off, use the Pre-

Programmed 3-Digit code

Method or Scanning Method.

Repeat the steps above for all

components (CBL, TV).

B. Quick Set-up Code Tables

C. Manual Programming

Manual Programming

The remote control can be programmed

by entering a three-digit code number

that corresponds to particular brands

and models of equipment. The three-

digit code numbers are listed in the

code tables sections of this instruction

manual.

STEP1 Turn on the equipment that

you want the remote con-

trol to operate (Cable Box or

TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The corresponding device

LED will turn on indicating

that it is ready to be pro-

grammed. The LED will remain

on for 30 seconds. The next

step must be entered while

the LED is on.

STEP3 Point the remote control

toward the equipment and

enter the three-digit code

number assigned to your

STEP1 Turn on the equipment that

you want the remote control

to operate (Cable Box or TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The device LED will turn on

indicating that it is ready to

be programmed. The LED

will remain on for 30 seconds.

The next step must be enter-

ed while the LED is on.

STEP3 Press the [CH5] or [CH6]

button one at a time or keep

it pressed. The remote will

emit a series of Power

ON/OFF code signals. Release

the [CH5] or [CH6] button

as soon as the equipment

turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER]

button. The equipment

should turn back on. Then

try all of the functions on

the remote control (i.e.

volume, mute, etc.) to ensure

you have the correct code. If

any of the functions do not

operate as they should,

repeat the instructions from

STEP 3 above to continue

the Auto Search Method.

STEP4 Press the same [DEVICE]

brand from the code tables.

If there are more than one

three-digit number listed for

your brand, try one code

number at a time until your

equipment turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER] button.

The equipment should turn

back on. Then try all of the

functions on the remote

control (i.e. volume, mute,

etc.) to ensure you have the

correct code. If any of the

functions do not operate as

they should, repeat the

instructions from STEP 3

above using the next three

digit code number from the

brand list.

STEP4 Store the three-digit code

by pressing the same

[DEVICE] button once again.

The device LED will blink

twice to confirm that the

code has been stored.

D. Auto Search Method

If none of the three digit code numbers

assigned to your brand of equipment

works, or the code table does not list

your brand, you can use the Auto

Search Method to find the correct

three-digit code number for your

equipment by following steps:

Button Functions

Programming the Remote Control

Macro Button

For

future

use

Universal Remote Control, Inc.

www.universalremote.com

OCE-0082E Rev 08 (14/03/14)

UR2-211

Operating Manual

For Easy Clicker

This remote control is designed

to operate most Digital, Analog

Cable boxes, IPTV set top boxes

and TVs.

Introduction

Replacing Batteries

Before you program or operate the

remote control, you must install

two new AA alkaline batteries.

STEP1 Remove the battery com-

partment cover from the

back of your remote control.

STEP2 Check battery polarity

carefully, and install the

batteries as shown in the

illustration below.

STEP3

Replace the battery com-

partment cover.

*Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either

the CBL or TV button, depending on which device you are programming the remote to operate.

A. Quick Set-Up Method

(Refer to the Section B Quick Set-up table of codes)

STEP1 Turn on the component you want to program. To program your TV, turn on the TV.

0 PACE DTA

1 SA/CISCO, SAMSUNG, PACE DIGITAL

2 MOTOROLA DIGITAL

3 MOTOROLA DTA

4 EVOLUTION DTA

5 CISCO IPTV

6 ADB IPTV

7 TECHNICOLOR

8 AMINO 140/540 IPTV

9 MOTOROLA IPTV

Quick Number

Manufacturer/Brand

CBL

0 SANYO

1 SONY

2 SAMSUNG

3 LG

4 TOSHIBA

5 PANASONIC

6 PHILIPS

7 HITACHI

8 SHARP

9 VIZIO

Quick Number

Manufacturer/Brand

Autres manuels pour Easy Clicker UR2-211

Table des matières

Autres manuels Universal Remote Control Télécommande

Universal Remote Control

Universal Remote Control MX600 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4U-MDVR2 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5-8400 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-800 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4U-MDVR2 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR-J22TVE Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-EXP-CHD1 Manuel utilisateur

Universal Remote Control

Universal Remote Control ONE FOR ALL 4880CODES Manuel utilisateur

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-450 Manuel utilisateur

Universal Remote Control

Universal Remote Control Total Control Manuel utilisateur

Universal Remote Control

Universal Remote Control ONE FOR ALL 5650CMN Manuel utilisateur

Universal Remote Control

Universal Remote Control URC 22?-7 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5-8400A Manuel utilisateur

Universal Remote Control

Universal Remote Control PCL-300 Manuel utilisateur

Universal Remote Control

Universal Remote Control R5 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Manuel utilisateur

Universal Remote Control

Universal Remote Control URC-A6 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-EXP Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-EXP Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5L-9000L-IP Manuel utilisateur

Universal Remote Control

Universal Remote Control ONE FOR ALL 8800CMN Manuel utilisateur

Universal Remote Control

Universal Remote Control total control TRC-780 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation