Unitech PA500 Manuel utilisateur
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA500 Enterprise PDA
Quick Reference Guide
400545G Rev. A
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Front View
NOTE: For more information on how to use the barcode laser scanner and install an SD,
SDIO, or MMC card into the memory slot, refer to the PA500 Enterprise PDA User’s Manual.
1Barcode laser scanner (optional) 6Keypad
2Status indicator 7Microphone
3SDIO/MMC slot 8Left scanner trigger key
4Power button 9Strap holder
5LCD touch screen
English
1
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Back View
10 Speaker 15 Earphone jack
11 Battery release latch 16 Right scanner trigger key
12 Reset button 17 Infrared (IR) port
13 Main battery 18 Stylus
14 Universal connector
English
2
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Keypad
1Software keyboard button 5Today button
2Notes button 6Calendar button
3Navigation key 7Tasks button
4Email button
3
English
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Installing the Battery
WARNING! There is a risk of fire and burns if the battery pack is handled improperly.
DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery
pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of
used batteries according to local recycling guidelines in your area.
1 Position the battery pack, making sure the battery pack fits the shape of the battery
compartment.
2 Slide the battery pack into the battery bay until it clicks into place.
Li-Ion Li-Ion
Recycle Lithium-ion batteries.
Do not throw in trash.
4
English
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Charging the PA500
IMPORTANT! For initial use, you need to charge your device for about 16 hours. After that,
you can charge it everyday to recharge the battery to full capacity. You can charge your
device using the USB charging cable or the docking station.
CAUTION: Operating the PA500 for the first time without the AC adapter, and without fully
charging the backup battery may result in loss of data stored in RAM memory.
1 Press and hold the connector button on the USB chargingcable and connect it to
the PA500.
2 Plug the AC adapter cable into the power jack on the USB charging cable.
3 Connect the AC adapter into an electrical outlet. The connection is secure when the
LED indicator on the front panel of the device lits up red.
5
English
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Turning the PA500 on for the First Time
After you have initially charged your device for about 16 hours, the device is ready to be
used.
1 Turn on your device by pressing the power button on the front panel.
The Unitech PA500 welcome screen appears. The Windows CE screen will appear
shortly thereafter.
2 Adjust the screen brightness by pressing the up and down arrow keys to decrease
or increase screen brightness.
3 Calibrate the PA500.
4 Follow all onscreen instructions to complete the set up.
6
English
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Performing the first synchronization process
After completing the setup procedures you can now perform the first ActiveSync operation
with the help of the New Partnership setup wizard.
1 Install the Microsoft ActiveSync software to your PC. Refer to the PA500 Enterprise
PDA User’s Manual for detailed installation instructions.
2 Connect the USB charging cable to the universal connector on the bottom of your
device (1). If necessary, connect an adapter.
3 Plug the other end of the USB charging cable into a USB port on your PC (2).
4 Turn the device on.
5 After ActiveSync should start atuomatically and recognize your PA500 and
configure the USB port. The New Partnership setup wizard will automatically start.
NOTE: If ActiveSync doesn’t start automatically, click Start > Programs > Microsoft
ActiveSync.
6 Follow all onscreen instructions.
7 When the configuration process is complete, the ActiveSync window appears.
8 Synchronization will be initialized and will take place if you’ve chosen to
synchronize periodically or upon connection.
9 You can also set remote synchronization with your computer using the following
connection options:
• Infrared connection
• Bluetooth connection
• WiFi connection
For more information on how to use these options, refer to the PA500 Enterprise
PDA User’s Manual.
7
English
Copyright 2007 unitech Electronics Co., Ltd. Alle Rechte vorbehalten. unitech ist ein eingetragenes
Markenzeichen der unitech Electronics Co., Ltd.
Vorderseite
HINWEIS: Weitere Informationen über die Verwendung des Barcode-Laserscanners und die
Installation einer SD, SDIO- oder MMC-Karte im SDIO/MMC-Steckplatz finden Sie im
Unitech PA500 Enterprise PDA-Benutzerhandbuch.
1Barcode-Laserscanner (optionale) 6Tastatur
2Statusanzeige 7Mikrofon
3SDIO/MMC-Steckplatz 8Linke Scannertaste
4Netztaste 9Riemenhalter
5LCD-Touchscreen
Deutsch
8
Copyright 2007 unitech Electronics Co., Ltd. Alle Rechte vorbehalten. unitech ist ein eingetragenes
Markenzeichen der unitech Electronics Co., Ltd.
Ruckseite
10 Lautsprecher 15 Ohrhörerbuchse
11 Akku-Freigaberiegel 16 Rechte Scannertaste
12 Reset-Taste 17 Infrarotanschluss
13 Hauptakku 18 Stift
14 Universalanschluss
Deutsch
9
Autres manuels pour PA500
5
Table des matières
Langues :
Autres manuels Unitech portable
Unitech
Unitech TB128 Manuel utilisateur
Unitech
Unitech HT730 Manuel utilisateur
Unitech
Unitech EA630 Manuel utilisateur
Unitech
Unitech PA690 Manuel utilisateur
Unitech
Unitech PA968II Manuel utilisateur
Unitech
Unitech PT930SA Manuel d'installation et d'exploitation
Unitech
Unitech PA730 Manuel utilisateur
Unitech
Unitech HT1 1D Batch Manuel utilisateur
Unitech
Unitech PA950 Manuel utilisateur
Unitech
Unitech HT630 Manuel d'installation et d'exploitation
Unitech
Unitech PA968 Manuel utilisateur
Unitech
Unitech PA692 Manuel utilisateur
Unitech
Unitech RH768 Manuel utilisateur
Unitech
Unitech HT630 Manuel utilisateur
Unitech
Unitech HT 1 Manuel utilisateur
Unitech
Unitech PA968 Manuel utilisateur
Unitech
Unitech PA968II Manuel utilisateur
Unitech
Unitech HT580 Manuel utilisateur
Unitech
Unitech HT580 Fiche d'information produit
Unitech
Unitech PA970 Manuel utilisateur
