4
•Do not expose to extremely high temperature or direct sunlight.
•This machine is not designed for use in humid environments or under water.
•if you are not using your machine, store it in a dry and safe place, out of reach of children.
•Before use make sure that all safety elements work correctly and efficiently. Make sure all moving parts
are in good condition.
•Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
as designed. Beware of all other conditions that may have a negative effect on the proper functioning of
your device.
•If not stated otherwise in this manual, all damaged parts and safety elements must be repaired or changed.
Lifting equipment
•Lift only objects with maximum weight allowed or less.
•Keep your hands away from moving parts of the machine.
•Release or lower the object slowly. Beware of sudden stops or sudden quick release.
•Your machine has been designed for use on solid, smooth and even surfaces.
•Before lifting any object, make sure that the cart is secured against movement.
•Use caution during object lowering. You may get injured during lowering the load.
Vehicle service centre accessories and equipment
•Before performing any repair, secure the vehicle against movement.
Hydraulic equipment
•Small escape trace of hydraulic fluid form the hydraulic pump and from other hydraulic equipment is usual
phenomenon and it is not considered as defect. If there is a shortage of hydraulic fluid it must be refilled
regularly.
•Before uncoupling compressed air piping or hose, wait until the pressure equalizes.
•Before starting your work, inspect all couplings and piping for leakage. If leak is found repair it immediately.
•Never try to lift more than the maximum allowed weight. Do not try to extend the piston bar using
excessive force. It may come out of the cylinder completely.
•Keep your tools far away from heat sources and fire to prevent damages to your tools.
•Hydraulic fluid spill on floor creates danger of slipping and risk of personal injuries. If you discover a spill,
have it cleaned immediately. Use appropriate cleaning wool or absorbing substances. In accordance
with the rules of waste law management, absorbing substances or wool must be properly stored in an
enclosed metal container and delivered to an authorized waste collection centre.
•Do not mix different hydraulic fluids together (e.g. from different manufactures).
•Follow the hydraulic fluid change deadlines.
•Make sure that you are using clean hydraulic fluids. Dirt in the fluids significantly lowers the lifespan of the
fluid and may cause irreversible damages to your machine.
•Use protective covers and blind flanges to prevent impurities from entering into the device.
Power machines
•Before initiating maintenance work with the use of hydraulic machines, gradualy decrease the work
pressure to atmospheric.
•Should the machine contain compressed springs, always insure its gradual and safe release with the aid
of an appropriate preparation.
