Uniden App Cam Solo+ Manuel utilisateur
App Cam Solo+
Quick Start Guide
Twin Pack includes 2 single packs of AppCam Solo+.
Triple Pack includes 3 single packs of AppCam Solo+.
Quad Pack includes 4 single packs of AppCam Solo+.
What’s in the Box
Screw Mount
x1
Screw Kit
x2 x1
Silicone Weatherproof
Cover x1
App Cam Solo+
x1
Flat Mount
x1
Rechargeable
Battery
x1
Reset Needle
x1
Power Cable
Camera
Mounting Strap
x1
Mounting Template
x2
The camera and the rechargeable battery are packed separately in the same package.
Please dress the camera with the Silicone Cover for better weatherproof performance
when you install the camera outdoors.
2
Optional Accessories
Solar Panel
(SPS-01)
x1
Battery Pack
(BPS-01)
x1
Visit the App Cam Solo+ page on the website for more information on the availability
of optional accessories:
www.uniden.com.au for Australia
3
Red LED (WiFi connection failed)
Blinking: Standby status
On: Working status
Blue LED (WiFi connection succeeded)
Blinking: Standby status
On: Working status
General Introduction
Micro SD Card Slot
Reset Button
Daylight Sensor
Lens
Status LED
Built-in Mic
Speaker
Built-in PIR Motion Sensor
4
Install the Rechargeable Battery to the Camera
Please press the button (on the top of the back housing), and slide the back housing
downward to close it. The button needs to be closed rmly for ultimate weatherproof
performance.
For weatherproof performance, always cover the charging port with the rubber plug
5
Charge the Battery
1. You can charge the battery when it’s installed to the camera.
2. You can charge the battery separately.
3. You can charge the battery with Uniden Solar Panel (SPS-01).
Please note that the solar panel is NOT included in the package.
There is a status LED under the micro USB port of the battery, indicating the battery charging
status.
Green LED: Fully charged
Red LED: Charging
LED Battery Status
6
Uniden App Cam Solo+ is not designed for 24/7 full capacity running or around-the-clock
live streaming. It’s designed to record motion events and remotely view live streaming only
when you need it.
Please note that a fully charged battery will support up to 180 days in standby mode, or
960 minutes (IR LEDs off in daytime) of motion triggered recording and live view.
1. Please charge your rechargeable battery with a standard and high-quality DC5V
battery charger.
2. If you want to power the camera via solar panel, please note that the camera is ONLY
compatible with Uniden Solo Panel (SPS-01). You cannot charge the battery with
other solar panel brands.
3. Please charge the battery in temperature between 0˚C and 45˚C
Important Safeguards on Battery Use
!
Important Note
!!
7
Install Uniden Solo App
Set up the Camera
There are two ways to get the Uniden Solo App:
• Search “Uniden Solo” in App Store (for iOS),
download and install the app.
• Search “Uniden Solo” in Google Play (for Android),
download and install the app.
Please follow the prompt tone to
congure the camera
Camera has been started
up. Please run app, add the
camera and set it up.
1. Please click the “ ” button in the
top right corner to add the camera.
I heard “Connection to the router failed! ”
I heard “Connection to the router succeeded.”
1 2 3 4 5 6 7 8 9 10 10
Uniden Wi-Fi
Solo+
12:00
12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00
8
2. Scan the QR code on the back
of the camera.
3. Click “Connect to Wi-Fi” to
continue.
I heard “Connection to the router failed! ”
I heard “Connection to the router succeeded.”
1 2 3 4 5 6 7 8 9 10 10
Uniden Wi-Fi
Solo+
12:00
12:00
12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00
I heard “Connection to the router failed! ”
I heard “Connection to the router succeeded.”
1 2 3 4 5 6 7 8 9 10 10
Uniden Wi-Fi
Solo+
12:00 12:00
12:00
12:00 12:00 12:00 12:00 12:00 12:00 12:00 12:00
Note:
When the setup for the
camera is completed, your
family can access the
camera simply by clicking
“Access Cameras” without
reconguring it.
9
4. Click the button “I have heard the voice
prompt” to enter the next page.
If you did not hear the voice prompt, please
press “I did not hear the voice prompt” for
help.
I heard “Connection to the router failed! ”
I heard “Connection to the router succeeded.”
1 2 3 4 5 6 7 8 9 10 10
Uniden Wi-Fi
Solo+
12:00 12:00 12:00
12:00
12:00 12:00 12:00 12:00 12:00 12:00 12:00
5. Enter the Wi-Fi password of the selected
Wi-Fi network and press “I have entered
the correct information” to enter the
next page.
I heard “Connection to the router failed! ”
I heard “Connection to the router succeeded.”
1 2 3 4 5 6 7 8 9 10 10
Uniden Wi-Fi
Solo+
12:00 12:00 12:00 12:00
12:00
12:00 12:00 12:00 12:00 12:00 12:00
10
Table des matières
Autres manuels Uniden Caméra de sécurité
Uniden
Uniden APPCAM25HD Manuel utilisateur
Uniden
Uniden GNC 701 Manuel utilisateur
Uniden
Uniden Guardian GC45 Manuel utilisateur
Uniden
Uniden UDR444 Manuel utilisateur
Uniden
Uniden 4KTPD-MVF Manuel utilisateur
Uniden
Uniden APPCAM23 Manuel utilisateur
Uniden
Uniden App Cam Pano Series Manuel utilisateur
Uniden
Uniden SOLO+ Manuel utilisateur
Uniden
Uniden AppCam Solo 2 Manuel utilisateur
Uniden
Uniden App Cam Solo Pro Series Manuel utilisateur
Uniden
Uniden App Cam Floodlight Manuel utilisateur
Uniden
Uniden App Cam Spotlight+ Manuel utilisateur
Uniden
Uniden UDSC15 Manuel utilisateur
Uniden
Uniden UDR444 Manuel utilisateur
Uniden
Uniden UDS655 Manuel utilisateur
Uniden
Uniden Guardian GC45 Manuel de service
Uniden
Uniden UDRC58HD Manuel utilisateur
Uniden
Uniden AppCam 25HD Manuel utilisateur
Uniden
Uniden APPCAM23 Manuel utilisateur
Uniden
Uniden UDRC14 Manuel utilisateur
