Unicol VCC1 Manuel utilisateur

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier

claims agent and do not continue the installation until it has been reviewed. Please watch for pinch points.

Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any spring loaded

parts. Before installing, make sure that the supporting surface will support ﬁve times the combined load of

the solution and the hardware. Never exceed the maximum load capacity. Please also layout all components

to ensure that you have all of the required parts before proceeding (see BOM list on following page). Use of

this product for anything other than its speciﬁed use may result in failure or personal injury. This product is

intended for indoor use only. We recommend using a qualiﬁed trades person for installation. Use an assistant

or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Revised 28/09/22

01865 767676

sales@unicol.com

www.unicol.com

*Please check model specific details before installing*

Pillar Clamps - VCC1 & VCC2

Screen Size: 70” Guide Max. Weight: 120kg

VCC1 VCC2

2Revised 28/09/22

COMPONENTS

01865 767676

sales@unicol.com

www.unicol.com

INSTALLERS REQUIRED

1-2

#TOOLS REQUIRED

117mm Spanner

1 2

# EQUIPMENT QTY

1Straps 2

2Connecting Bars 4

3Studding with Fixings 4

4Fixing Cover VCC1 (VCC2) 1 (0)

5Fixing Cover with Arm VCC1 (VCC2) 1 (2)

NOTE: Each VCC is custom made to ﬁt the pillar

speciﬁed and once tightened clamp it in position.

There is no need to drill into the pillar.

Multi-arm units are assembled in the same way.

01865 767676

sales@unicol.com

www.unicol.com

Revised 28/09/22

STEP 1 – Place both straps around your pillar, either on the ﬂoor or on a support. Place connecting bars

into slots in straps and push the studding provided through the holes to attach them. NOTE: The open

channel section of the bar must be positioned against the wall of the strap.

STEP 2 – Fix the studding together loosely using the plain and split washers and M10 nuts.

Plain Washer

Split Washer

M10 Nut

4Revised 28/09/22

01865 767676

sales@unicol.com

www.unicol.com

STEP 3 – Fix covers (loosely) to the Strap connecting bars with the 4 x M10 x 25 hex screws provided. Lift

the whole unit to the desired height and tighten studding so that it clamps the straps to the pillar. Tighten

cover screws. The VCC1 has an arm on one cover only. The VCC2 has arms on both covers.

STEP 4 – Connect direct ﬁtting adapter (ordered separately) to peg for screen or projector suspension.

A through bolt (supplied with the adapter) must be used to connect the adapter to the peg. Take up any

slack using the grub screws in the adapter socket.

PS1 Screen

Adapter shown

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Unicol Support et étagère

Unicol

Unicol SBM Manuel utilisateur

Unicol

Unicol AZENITH VSX1800SC Manuel utilisateur

Unicol

Unicol NST1 Manuel utilisateur

Unicol

Unicol PA2 Manuel utilisateur

Unicol

Unicol PZW TILTING MOUNT Manuel utilisateur

Unicol

Unicol AVECTA TWIN SCREEN ACHP Manuel utilisateur

Unicol

Unicol TCAVT Manuel utilisateur

Unicol

Unicol AXIA TITAN Manuel utilisateur

Unicol

Unicol RH200HD Manuel utilisateur

Unicol

Unicol GKUX Manuel utilisateur

Unicol

Unicol VERTISLIDE VTS1 Manuel utilisateur

Unicol

Unicol AX12P Manuel utilisateur

Unicol

Unicol GYROLOCK Manuel utilisateur

Unicol

Unicol RH100 Manuel utilisateur

Unicol

Unicol ODH Manuel utilisateur

Unicol

Unicol WB0 Manuel utilisateur

Unicol

Unicol RH200UHD Manuel utilisateur

Unicol

Unicol NEC W32-65L Manuel utilisateur

Unicol

Unicol Powalift Manuel utilisateur

Unicol

Unicol pozimount PZX Manuel utilisateur

Unicol

Unicol Parabella Manuel utilisateur

Unicol

Unicol TVV1 Manuel utilisateur

Unicol

Unicol KP Kit Manuel utilisateur

Unicol

Unicol AV2X2T Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur