6
Indicator Lights :
System initiation : Press and hold the power button for 5 seconds. When
boot the LED’s will light up successively and dim down afterwards. This
movement will continue until device is sending out a Wi-Fi signal.
Battery State: Keep battery lamp on with current status , battery light is
green.
Signal Strength State: keep battery lamp as the current status. The Signal
light will Turn on that it one by one from right to left.
Wi-Fi Sleep Mode: When the L5 is on, press and hold the power button
for 2 seconds that will being Sleep Mode. The Wi-Fi will be not
discovered. When you want to connet the Wi-Fi, you should press and
hold the power button for 2 seconds again.
b. Turn off the power, press and hold the power button for 5 seconds.
System shutdown: ALL the Lamps which the lamp will turn off one by one from
SleepMode lamp to Battery lamp.
8. Connecting to the Device
Here is an example to connect to a L5 with a PC.
- Press Power Key for longer than 5 seconds to turn on a L5.
- Scan available Wi-Fi access points at a Windows PC by clicking the network icon
at the right buttom corner.
- Connect PC with the L5 device with a typical name (SSID) as L5-AP.
