UMAGE TRIPOD Manuel utilisateur
TRIPOD
base |user guide
WITH LOVE FROM COPENHAGEN
At UMAGE, our designers take inspiration from the distinct
nature of the Nordic landscape to create unique designs
related to the way we live in an urban setting. Inuenced by
the design language, colours and materials found around us in
Scandinavia, we create a collection that is rooted in our home
but designed for everyone.
Versatile, exible and multifunctional, our designs are created
to enhance an urban lifestyle in smaller spaces!
ENGLISH
If the external exible cable or cord
of this luminaire is damaged, it shall
be exclusively replaced by the ma-
nufacturer or his service agent or a
similar qualied person in order to
avoid a hazard.
FRANÇAIS
Si le câble électrique de ce luminaire
est endommagé, il peut être remplacé.
Pour éviter tout danger, le remplace-
ment doit impérativement être effec-
tué par le fabricant, un représentant
de celui-ci ou un réparateur agréé.
ESPAÑOL
Si se dañase el cable exterior exible
de esta lámpara, para evitar riesgos
deberá ser sustituido exclusivamente
por el fabricante, su representante o
un electricista cualicado.
! IMPORTANT !
Tripod base safety instructions
(Read and keep these instructions for future reference)
PRODUCT NAME
Tripod base Model no.: 4055, 4056
Rating parameter: 120V, 60HZ, AC ONLY
Lamp type: E26 Type A / 60W MAX
NOTE
This instruction sheet covers a variety of stands
(dierent colors), but with the same applications.
Do not connect your stand to a power source until
all stand- and lamp assembly and bulb installation
is complete.
NOTICE
You are advised to contact a qualied electrician
for these procedures
SAFETY PROCEDURES
Read and keep these instructions for
future reference
1. Remove the packaging carefully without the
use of sharp objects. Assemble the product
as shown in this user guide, then place the
product rmly on a xed surface before mov-
ing onto next procedure.
2. Unscrew the ring of the socket. Assemble the
suitable lampshade (not included) and put
it on the socket and screw the ring back on
until lampshade is completely fastened.
3. Firmly screw an E26 light bulb (MAX 60W)
into the socket. Do NOT put your ngers into
the socket!
4. Insert the plug into a suitable outlet and turn
on the power supply.
5. Switch to on.
6. Always disconnect the power-supply before
cleaning, changing of light bulbs or repair of
the stand. The latter, should always be done
by a qualied electrician.
7. Let the light bulb cool o suciently before
changing the bulb.
8. Keep the Tripod away from any ammables,
or objects that cannot handle heat.
9. Please always place the stand on a level sur-
face not more than 8° angle.
10. The stand is for indoor use ONLY.
11. If the stand in any way malfunctions, to
avoid accidents or mishandling of the Tripod,
please always contact a qualied electrician.
12. Only use the Tripod, where these same of-
cial electricial- and technical parameters
exist!
13. Do NOT touch the light bulb immediately after
the light is turned o. Be aware of possible
scalding!
14. The Tripod is NOT a childrens toy and should
not be used in any other manner than de-
scribed above.
15. The minimum diameter of open area (top &
bottom) should NOT be less than 100MM (4
inches); Lamp-to-shade spacing must be
over 3-1/4 inches (63.5mm); Lamp Centerline
Length must over 2-1/2 inches (82.5mm).
16. The weight of lamp shade should NOT exceed
1.1 KGS (2-1/2LBS).
NOTE
DO NOT try to repair the Tripod if the product,
cable, socket or the lampshade is in any way
broken or not as expected, such tasks are
only intended for qualied electricians!
DESIGNED BY
SØREN RAVN CHRISTENSEN
Just where you need
to create that tranquil
ickering candlelight
atmosphere.
“
”
Autres manuels pour TRIPOD
1
Table des matières
Autres manuels UMAGE Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
