UltraTape UltraLabel PRO Manuel utilisateur

USER’S

MANUAL

UltraLabel PRO

Thermal Transfer and

Direct Thermal Printer

COMPLIANCES................................................................................................1

1. Introduction.........................................................................................1

2. Getting Started....................................................................................1

2.1 Unpacking and Inspection............................................................1

2.2 Equipment Checklist.....................................................................1

2.3 Printer Parts...................................................................................3

3. Setup....................................................................................................4

3.1 Setting Up the Printer ...................................................................4

3.2 Loading the Ribbon.......................................................................5

3.3 Loading Label Stock.....................................................................7

3.4 External Label Roll Mount Installation (Option) .........................9

3.5 Peel-off Module Installation (Option).........................................11

3.5.1 Loading the Paper in Peel-off Mode....................................14

3.6 Cutter Module Installation (Option) ...........................................16

3.6.1 Loading Label in Cutter Mode .............................................19

3.7 Instructions to Top Cover Operation.........................................20

3.8 Diagnostic Tool ...........................................................................22

3.8.1 Start the Diagnostic Tool......................................................22

3.8.2 Printer Function (Calibrate sensor, Ethernet setup, RTC

setup………) ...................................................................................23

3.9 Setting Ethernet by Diagnostic Utility (Option) ........................24

3.9.1 Using USB interface to setup Ethernet interface...............24

3.9.2 Using RS-232 interface to setup Ethernet interface ..........25

3.9.3 Using Ethernet interface to setup Ethernet interface........26

3.10 Install Memory Card..................................................................28

4. Power on Utilities..............................................................................30

4.1 Ribbon and Gap/Black Mark Sensor Calibration......................30

4.2 Gap/Black Mark Calibration, Self-test and Dump Mode...........31

4.3 Printer Initialization.....................................................................35

4.4 Set Black Mark Sensor as Media Sensor and Calibrate the

Black Mark Sensor............................................................................36

4.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor

4.6 Skip AUTO.BAS...........................................................................36

5. Maintenance......................................................................................38

Contents

5.1 Cleaning.......................................................................................38

6. Troubleshooting................................................................................40

6.1 LED Status...................................................................................40

6.2 Print Quality.................................................................................41

7. LED and Button Operation...............................................................43

7.1 LED...............................................................................................43

7.2 Button Operation.........................................................................43

Information in this subject to change without notice and does not represent a

commitment on the part of UltraTape Industries. No part of this manual may

be reproduced or transmitted in any form by any means, for any purpose

other than the purchaser’s personal use, without the expressed written

permission of UltraTape Industries.

Compliances

CE Class B:

EN55022: 1998+A1: 2000+A2: 2003

EN55024: 1998+A1: 2001+A2: 2003 IEC 61000-4 Series

EN61000-3-2: 2006 & EN61000-3-3: 1995+A1: 2001

FCC Part 15, Class B

UL, CUL

C-Tick:

CFR 47, Part 15/CISPR 22 3rd Edition: 1997, Class B

ANSI C63.4: 2003

Canadian ICES-003

TÜ V/Safety: EN60950: 2000

Wichtige Sicherheits-Hinweise

1. Bitte lesen Sie diese Hinweis sorgfältig durch.

2. Heben Sie diese Anleitung fűr den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromentz zu trennen.

Verwenden Sie keine Flüssig-oder Aerosolreiniger. Am besten eignet

sich ein angefeuchtetes Tuch zur Reinigung.

4. Die Netzanschluß-Steckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schűtzen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein

Kippen oder Fallen könnte Beschädigungen hervorrufen.

7. Beachten Sie beim Anschluß ans Stromnetz die Anschlußwerte.

8. Dieses Gerät kann bis zu einer Außentemperatur von maximal 40℃

betrieben werden.

CAUTION

1. HAZARDOUS MOVING PARTS IN CUTTER MODULE. KEEP FINGER AND

OTHER BODY PARTS AWAY.

2. THE MAIN BOARD INCLUDES REAL TIME CLOCK FEATURE HAS LITHIUM

BATTERY CR2032 INSTALLED. RISK OF EXPLOSION IF BATTERY IS

REPLACED BY AN INCORRECT TYPE.

3. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER

INSTRUCTIONS.

B급기기

(가정용 정보통신기기)

이기기는 가정용으로 전자파 적합등록을 한기기로서

주거지역에서는 물론 모든 지역에서 사용할 수있습니다.

1.Introduction

Thank you for purchasing the UltraLabel PRO Thermal Transfer and Direct

Thermal Bar Code Printer. Although the printer takes only a small amount of

space, it delivers reliable, superior performance.

This printer provides both thermal transfer and direct thermal printing at user

selectable speed of: 2.0, 3.0, 4.0 or 5.0 ips, for ULP300GY-N & ULP300GY-S. All

common bar codes formats are available. Fonts and bar codes can be printed in 4

directions, 8 different alphanumeric bitmap fonts and a build-in true type font

capability. You will enjoy high throughput for printing labels with this printer.

2. Getting Started

2.1 Unpacking and Inspection

This printer has been specially packaged to withstand damage during shipping.

Please carefully inspect the packaging and printer upon receipt. Please retain the

packaging materials in case you need to reship the printer.

2.2 Equipment Checklist

Printer

BarTender UltraLite CD disk

Quick start guide

USB port cable

External universal switching power supply

Power Cord

Label Spindle, fixing tab x2, 1.5”core adapter x2

Ribbon spindle x2

Ribbon rewind spindle paper core

If any parts are missing, please contact the Customer Service Department of

your purchased reseller or distributor.

Dealer option

Peel off module assembly

Guillotine cutter

Full cut:

Paper thickness: 0.06~ 0.19mm, 500,000 cuts

Paper thickness: 0.19mm 200,000 cuts

Partial cut:

Paper thickness: 0.06~0.12mm, 500,000 cuts

Note: Except for the linerless cutter, all regular/heavy duty/care label cutters DO

NOT cut on media with glue.

Main board integrated with internal Ethernet

Internal Ethernet print server module

User option

KP-200

KU-007 plus

External Ethernet print server

External wireless (802.11b/g) print server

External roll mount, media OD. 214 mm (8.4”) with 3”core label spindle

Contact CCD contact scanner

Long range linear image bar code scanner

2.3 Printer Parts

Fig. 1 Top front view

Note:

The interface picture here is for reference only. Please refer to the product specification for

the interfaces availability.

Top Cover Open Lever

LED Indicator

Feed Button

Printer Top Cover

Ribbon Access Cover

Clear Window

1. USB Interface

2. Centronics Interface

3. RS-232C DB-9 Interface

4. Power Jack

5. Power Switch

6. Rear Paper Guide

Fig. 2 Rear view

3. Setup

3.1 Setting Up the Printer

1. Place the printer on a flat, secure surface.

2. Make sure the power switch is off.

3. Connect the printer to the computer with the Centronics or USB cable.

4.Plug the power cord into the power supply connector at the rear of the printer,

and then plug the power cord into a properly grounded receptacle.

Fig. 3 Attach power supply to printer

Note:

Please switch OFF printer power switch prior to plug in the power cord to printer power jack.

Power Supply

Plug

Power Cable

Power Switch

USB

RS-232C

Centronics

3.2 Loading the Ribbon

The printer will detect if the ribbon is installed after turning on power on and it will

set printing mode to thermal transfer or direct thermal printing mode automatically. If

printer does not detect the ribbon, the ribbon take up motor will be turned off.

Make sure the printer top cover is engaged properly at both sides prior to powering

up the printer.

Please follow the steps below to install the ribbon into printer.

1. Push down on the ribbon access window to unlatch and open the cover.

2. Place a paper core onto the ribbon rewind spindle.

3. Mount the ribbon rewind paper core on the front hubs.

4. Install a ribbon on the ribbon supply spindle.

5. Mount the ribbon supply spindle on the rear hubs.

6. Thread the ribbon leading tape downward pass the print head.

7. Attach the ribbon leader to the ribbon rewind paper core.

8. Rotate the ribbon rewind paper core until the ribbon leader is thoroughly, firmly

encompassed by the black section of the ribbon.

9. Close the ribbon access window.

Fig. 4 Ribbon installation (I)

Ribbon Spindle

Front Hub

Paper Core

Back Hub

Ribbon Access Cover

Autres manuels pour UltraLabel PRO

Table des matières

Autres manuels UltraTape Imprimante

UltraTape

UltraTape UltraLabel PRO Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur