UltraBrite ZEN Series Manuel utilisateur
User Manual
Model# UDL1056-WHT
SAVE THESE INSTRUCTIONS
For Customer Care, product operation
information or problem resolution,
Call toll-free 1-877-654-1991.
Wireless Charging
5 Levels of Brightness
Dimmer Function
3 Light Modes
Warm/Natural/Bright
Touch Control
ZEN SERIES LED LAMP
with Wireless Charging & Date/Time Display
LCD Date/Time
UltraBrite®Long Lasting
LEDs (Up to 35,000 hours)
5 Levels of Brightness
Dimmer Function
Foldable Lamp
Head & Neck
LCD Date and Time Panel
Household Floor-Standing or
Table-Top Lamp
Charging Status
LED Indicator
(located near power
adapter port)
3 Light Modes
Warm/Natural/Bright
Wireless Charging
(1.0 Amp, 5V)
Power On/Off
Light Setting Auto Memory
(Maintains previous brightness
and light mode setting)
Base Metal Construction. The
weighted base will ensure
stability on floors.
Elevate your lifestyle!
UltraBrite ZEN Series LED Desk Lamp
with Wireless Charging& Date/Time Display
User Manual
SAVE THESE INSTRUCTIONS
For Customer Care, production operation information or problem resolution,
call toll-free 1-877-654-1991.
IMPORTANT SAFETY INSTRUCTION
WARNING - DO NOT EXPOSE THE ADAPTOR TO RAIN OR MOISTURE TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
WARNING!: USE THIS PRODUCT ONLY ON A FIRM, LEVEL SURFACE AND
PREVENT ANY OBJECTS OR MATERIALS FROM COVERING THE LIGHT SOURCE
AND/OR VENTILATION HOLES OF THE PRODUCT. PLEASE READ THE
INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.
- LED module is not replaceable.
- Do not break or pull out LED bulbs.
- Indoor use only.
- Do not look directly at the light.
- LED module lamp head may get hot after several hours of continuous use,
AVOID placing your hands directly on LED light panel.
- Keep lamp away from materials that may burn.
- If the power cord or adaptor is damaged, replace the power supply cord
and adapter. Call Customer Care for assistance.
Operation Instructions:
1. Use this product only on a firm, level surface and prevent any objects or
materials from covering the light source and/or ventilation holes of the
product.
2. Connect the AC adapter input into the connector in the rear of the lamp.
Plug the AC adapter into a standard household 120V AC outlet. Note: Use
only with the supplied AC adapter to avoid damage or fire.
3. Touch On/Off to turn on the lamp.
4. Touch control button to adjust brightness.
5. Touch to switch between 3 light temperature modes: Warm, Natural,
Bright light.
6. Touch On/Off to turn off.
LCD Date and Time Setting Instructions:
NOTE: Control Panel to set Date and Time is located near the front
bottom area of lamp body. Pull panel down to access buttons.
1. Push button 1 to adjust three level panel brightness.
2. To set time, push button 2 and the “hour” will flicker, then push
button 3 (Up) or button 4 (Down) to adjust “hour.” After “hour” setting,
touch button 2 again to set the “minute,” “year,” “month” and “day.”
• In Setting mode, touch button 2 until icker stops to exit function or
operation will stop in one minute.
• When not in Setting mode, touch button 3 (Up) to switch between “12h”
and “24h” display.
Wireless Charging Specifications:
Output: 1.0Amp, 5 Volt.
Place the Qi compatible device over the wireless charging icon ( ).
When the device begins charging, the device will indicate that charging is
active. This feature will not charge all Qi compatible devices. Please refer to
your device instructions for enabled capability. Device case or cover should
be removed to ensure a stable connection.
Charging Status LED Indicator (located near power adapter port)
Without light - Wireless charging is on standby.
With light - Wireless charging is active. Device will indicate charging is active.
Fast flashing - Abnormal operation. Recheck device position, remove cover,
or check Qi compatibility with your device.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.
All rights reserved.
1
2
3
4
Replace Date/Time battery with
CR2032 3V Lithium Battery
Elevate your lifestyle!
Specifications:
Light Bulbs: 56 LEDs
Brightness Levels: 5 Levels of Brightness
Light Temperature Modes: 3 Modes (Warm/Natural/Bright Light)
LED Life: 35,000 hours
Wireless Charging pad: 1.0A (5V)
Light Output (Lumens): 700LM
Color Rendering Index (CRI): 80 Ra
Correlated Color Temperature (CCT): Cold (5000K-6500K), Warm (2700K-3000K),
Neutral (3000K-4500K)
Power Supply: 10W Adapter Included
Input Voltage: 100-240V 50/60Hz 0.6A
Output Voltage: DC 12V 1.5A
Product Size: 6.9”L x 6.9”W x 30.7”H (176 x 176 X 780mm)
Maintenance Instructions:
1. Read the instruction manual carefully before assembly or use
in case of any risk.
2. Do not switch the light On/Off repeatedly in a short time to protect
the lifetime of the LED.
3. LED module is not replaceable. Do not break or pull out LED bulbs.
4. Do not look directly at the light.
5. Keep lamp away from material that may burn.
6. Use a dry cloth for daily cleaning.
7. For product operation information or a problem resolution,
call toll-free 1-877-654-1991.
Lamp FCC Instructions:
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
Lamp transformer FCC instructions:
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
“This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.”
Elevate your lifestyle!
One Year Limited Warranty / Product Registration
The manufacturer warrants the machine for a period of one year to be free from
defects in material and workmanship; this warranty does NOT cover normal wear
and tear. If any part is found to be defective during the warranty period, your
sole and exclusive remedy will be repair or replacement, at the manufacturer’s
option and expense, of the defective part except for the shipping cost. It is the
responsibility of the consumer to pay the shipping costs to return the machine
to the manufacturer.
This warranty is valid for the original consumer only with original proof of
purchase and is not transferable. This warranty does not apply in cases of abuse,
mishandling or unauthorized repair. The machine contains no serviceable parts.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to risk of injury. The manufacturer disclaims all liability
for injuries resulting from opening the machine. Mechanical damage resulting
from opening the machine may void the warranty. ANY IMPLIED WARRANTY,
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, IS HEREBY LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE. In no event shall the manufacturer be liable for any
consequential or incidental damages attributable to this product. This warranty
gives you specific legal rights. You may have other legal rights that vary
according to the laws of each territory.
Please retain original proof of purchase to ensure that your product is recorded
and warranty information received.
Return Instructions
Call 877-654-1991 for a Return Authorization Number (RA#) in order to return a
defective product.
Product Registration
Please register your new product by calling 877-654-1991.
Contact Us
For more information, please call 877-654-1991.
Elevate your lifestyle!
Chargement à induction
sans l — technologie
certiée Qi
LAMPE À DEL SÉRIE ZEN
avec recharge sans fil
et Date/Heure Affichage
CONSERVER CES INSTRUCTIONS
Pour le service à la clientèle, des renseignements
sur le fonctionnement du produit ou le règlement
d’un problème, composez le numéro sans
frais 1-877-654-1991.
Manuel de
l’utilisateur
Modèle no UDL1056-WHT
Recharge sans fil
5 niveaux de variateur
de luminosité
3 modes d’éclairage —
lumière chaleureuse/
naturelle/vive
Commande tactile
Affichage Date/Heure LCD
Tête et cou de
lampe pliable
Ampoules DEL de longue durée
UltraBrite®(jusqu’à 35000 heures)
5 niveaux de variateur
d’intensité
Panneau LCD Date / Heure
Lampadaire ou lampe de table
Voyant DEL indiquant
l’état de recharge
(situé près du port de
l’adaptateur)
3 modes
d’éclairage —
lumière chaleureuse/
naturelle/vive
Recharge sans fil
(1A, 5V)
Touche marche/arrêt
Mémorisation automatique du réglage
l’éclairage (conserve le réglage précédent
de la luminosité et de l’éclairage)
La construction en métal de
base. La base lestée assurera
la stabilité au sol.
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels UltraBrite Lampe de travail
Manuels Lampe de travail populaires d'autres marques
PowerSmith
PowerSmith PWLD080T Manuel utilisateur
MaxLite
MaxLite 73683 Manuel utilisateur
Heitronic
Heitronic Trend 27867 Manuel utilisateur
Monzana
Monzana Gore MZCL10 Manuel utilisateur
EINHELL
EINHELL TE-CL 18/2000 LiAC Manuel utilisateur
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur