U-Reach UB300 Manuel utilisateur
Flash Duplicator
User Guide
2 Sec.
Real Capacity
Check
2 Sec.
Real Capacity
Check
.
.
y
t
y
y
3 Sec.
Flash Speed
Check
3 Sec.
Flash Speed
Check
2
2
2
2
Re
R
Re
1 Sec.
Check
1 Sec.
Check
1
1
1
1
33MB
Per Second
Data Copy
33MB
Per Second
Data Copy
AN EASY YET POWERFUL CARRIAGEABLE COPIER
AN EASY YET POWERFUL CARRIAGEABLE COPIER
UB300
CONTENT
CONTENT
I. Product Introduction ...................................................................................................... 2
1. Overview .................................................................................................................. 2
2. Features .................................................................................................................... 2
3. Package Content ....................................................................................................... 2
4. Basic Instruction ....................................................................................................... 3
5. Function Table .......................................................................................................... 4
II. Function Introduction ..................................................................................................... 5
1. Copy .......................................................................................................................... 5
2. Compare ................................................................................................................... 6
3. Copy & Compare ...................................................................................................... 6
4. Utility ........................................................................................................................ 7
4.1 Device Info. ........................................................................................................ 7
4.2 Check Virus ........................................................................................................ 7
4.3 Capacity Check ................................................................................................... 8
4.4 Format FAT ......................................................................................................... 8
4.5 Measure Speed ................................................................................................... 9
4.6 Erase Content ..................................................................................................... 10
4.7 System Info. ....................................................................................................... 10
4.8 System Update ................................................................................................... 10
5. Setup .......................................................................................................................... 11
5.1 Copy Area .......................................................................................................... 11
5.2 Button Beep ........................................................................................................ 11
5.3 Language ............................................................................................................. 11
III. FAQ ................................................................................................................................ 12
IV. Specication ................................................................................................................... 14
1
I. Product Introduction
I. Product Introduction
1. Overview
The Flash duplicator is a stand alone, high speed and convenient equipment for easily
copy data anytime and quickly check Flash device’s quality. The checking capability
assists you to find out defective Flash device efficiently, like Capacity Check enables
you to find out the real capacity of Flash device; Measure Speed helps you to check each
Flash device’s read and write speed.
This 2 targets Flash duplicator is stand alone, no need of PC or any installation procedure,
when the system is turned off, nothing will be left in it, so there is no risk of virus
infection. And instant power on and off for quick boot up and shut down the duplicator
can save your time greatly. Its lightweight design, friendly interface and easy operation is
ideal for personal, office and shops application.
2. Features
1. Quick checking function to find out defective Flash device easily.
2. Standalone, no PC required, without risk of virus infection.
3. High writing speed up to 33MB/Sec.
4. Lightweight design and user friendly with instant power on and off.
5. Support multiple Flash media: it enables you to copy multiple Flash media of SD,
MS, CF through a qualified USB interface card reader.
3. Package Content
UB300 Adapter
2
I. Product Introduction
4. Basic Instruction
A. System Overview
B. Back side
Power Switch and Plug of the Power Supply
C. LCD Configuration
Forward
Backward
LCD
USB Target port
Signal LED
USB Master port
ESC
OK
Power switch
Power supply
Copy 870M
21% 0:20 275M
Copy progress
Time (mm:ss)
Copied Size
Total Content Size
3
I. Product Introduction
5. Function Table
Function Description
1. Copy USB/SD/Micro SD/CF Flash copy.
2. Compare Thisoptionmakesbit-by-bitcomparisonbetweenthemastersourceandallothercopiedash
cards.
3. Copy+Compare ThisoptionwillmakeacopyrstandthencomparethecopiedFlashdeviceswiththesource
immediatelyafterthecopyhasnished.
4. Utility
4.1 Device Info.
This function will show Flash device’s general information includes capacity, format and data
size.
4.2 Chk USB Virus
To check USB VIRUS in Flash
4.3 Capacity Check
To check Flash device’s real capacity.
4.4 Format FAT
To execute Flash FAT16/32 format.
4.5 Measure Speed
To measure Flash device’s read and write speed.
4.6 Erase Content
To quick erase the content in Flash device (support FAT format).
4.7 System Info.
Tocheckthermwareversion.
4.8 System Update
ToupdatethermwareviaUSB.
5. Setup
5.1 Copy Area
To set copy area.
5.1.1 Only Data Area
To detect the format FAT16,32/NTFS/Linux (Ext2, Ext3) and copy
the data area directly.
5.1.2 Whole Media
To copy the whole content of Flash including empty space.
5.2 Button Beep
To hear a beep or not when press a button.
5.3 Language
Support English and Japanese
4
II. Function Introduction
II. Function Introduction
1. Copy
It copies data from source Flash device to target Flash devices. The default setting of
copy area is “Data Only”. If you like to change copy area from “Data Only” to “ Whole
HDD” or “All Partitions”, please refer to function [5.1 Copy Area] for selecting the copy
modes
Steps of copy:
PlugsourceandtargetFlashdevicesintoduplicator→Select[1.Copy]→Press
[OK]→TheLCDwillshowthenumberoftargetflashpluggedinandreadyfor
copy→Copyprocessing→Copyfinished→Press [ESC] to finish copy.
In < Data Only > Mode:
** Do not take out any Flash device while the program is processing.
** It is strongly recommended that target and source have to be in the same capacity.
** After copy, the target flash cards' data and format will same as source flash card. Original
data in target flash cards will be no longer existed.
** When the program is in process, the green LED will flash. When the process has finished the
green LED will stop flashing but will remain illuminated. If an error occurs the red LED will
illuminate.
USB Duplicator
1. Copy
USB 3817M
Reading Content
OK USB (3817M) 870M
1. ready
OK Copy 870M
21% 0:20 275M
TOTAL OK:1 NG:0
1:24 OK:1 NG:0
Copy 870M
21% 0:20 275M
Copy progress Copied Size
Total Data Size
Time (mm:ss)
5
II. Function Introduction
2. Compare
It is used to check if the data on source Flash device is identical to the copied Flash
devices after duplication.
Steps of compare:
PlugFlashdevicesintoduplicator→Select[2.Compare]→Press [OK]→Compare
Processing→Comparefinished→Press [ESC] to finish compare.
** Do not take out any Flash device while the machine is processing.
** When the machine is in process, the green LED’s will flash. When the program has finished
the green LED’s will stop flashing but will remain illuminated. If an error occurs the red LED
will illuminate.
3. Copy & Compare
It makes copy first and then compare target Flash devices with source Flash device to
ensure data correctness.
Compare 870M
21% 0:20 275M
Compare progress Compare Size
Total Content Size
USB Duplicator
2. Compare
USB 3817M
Reading Content
OK Compare 870M
21% 0:20 275M
TOTAL OK:1 NG:0
1:24 OK:1 NG:0
6
II. Function Introduction
4. Utility
4.1 Device Info.
This function will show Flash device’s general information includes capacity, format and
data size.
Steps of Show Flash device’s Info.:
1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.1
Device Info. ]→Press [OK]→System shows the info.
2. Press [Forward] / [Backward] to check other Flash devices’ info.→Press
[ESC] to finish.
4.2 Check USB Virus
This function is to help you to find out USB VIRUS hidden in the Flash device quickly
and easily.
** This function is especially for Auto Run USB VIRUS checking only, not for detecting all kinds
of virus. It can only check the USB virus, can not clean or kill the virus.
Steps of Check USB virus:
1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.2
Chk USB Virus ]→Press [OK]→System search the USB Virus.
When red LED is on, it means the system found potentially risk of USB Auto run
virus.
Pass:0 C-Virus
Fall:1 0 Number of Flash in processFlash with virus
Flash without virus
USB Duplicator
4. Utility
[Utility]
2. Check USB Virus
OK OK Pass:0 C-Virus
Fall:1 0
Forward [#01] SIZE:3817M
Could be Vrius!
[#01] USB 3817M
FAT32 870M Data SizeFormat
Flash No. Capacity
USB Duplicator
4. Utility
[Utility]
1. Device Info.
OK OK [#01] USB 3817M
FAT32 870M
[#01] USB 3817M
FAT32 870M Data SizeFormat
Flash No. Capacity
USB Duplicator
4. Utility
[Utility]
1. Device Info.
OK OK [#01] USB 3817M
FAT32 870M
7
II. Function Introduction
2. Press [Forward] / [Backward] to check other Flash devices’ virus→Press
[ESC] to finish
4.3 Capacity Check
This function is to check Flash device’s real capacity and exam the Flash devices can
work or not.
Steps of check Flash device’s real capacity:
1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.3
Capacity Check]→Press [OK]→System analyze the Flash device’s real capacity.
2. Press [Forward] / [Backward] to check other Flash devices’ real
capacity→Press [ESC]to finish.
** Capacity check function supports asynchronous operation; you can plug in and pull out the
Flash devices to check their real capacity continuously without pressing any other buttons.
4.4 Format FAT
This function is to format Flash device. The system will format the Flash according to its
capacity automatically. If Flash capacity is above 2GB, the system will format the Flash
to FAT32, if Flash capacity is below 2GB, the format will be FAT16. During the process,
you can check each Flash device’s formatting status by pressing [Forward] /
[Backward].
** The source port (port #1) does not execute format function.
** This format function only format Flash device to FAT 16 or 32.
Pass:0 C-Virus
Fall:1 0 Number of Flash in processFlash with virus
Flash without virus
USB Duplicator
4. Utility
[Utility]
2. Check USB Virus
OK OK Pass:0 C-Virus
Fall:1 0
Forward [#01] SIZE:3817M
Could be Vrius!
USB Duplicator
4. Utility
[Utility]
3. Capacity Check
OK OK Pass:0 Capacity
Fall:1 0
Forward [#03] SIZE:3817M
Capacity OK
USB Duplicator
4. Utility
[Utility]
3. Capacity Check
OK OK Pass:0 Capacity
Fall:1 0
Forward
[#03] SIZE:3817M
Capacity OK
8
II. Function Introduction
Steps of formatting Flash device:
1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.4
Format FAT]→Press [OK]→System format the Flash devices
2. Press [Forward] / [Backward] to check other Flash devices’ format
status→Press [Esc] to finish.
4.5 Measure Speed
This function is to measure Flash device’s speed of read and write.
Steps of check Flash device’s speed:
1. Plug Flash devices into duplicator→Select [4. Utility ]→Pres [OK]→Select [4.5
Measure Speed]→Press [OK]→System check the speed of Flash devices
2. Press [Forward] / [Backward] to check other Flash devices’ format
status→Press [ESC] to finish.
USB Duplicator
4. Utility
[Utility]
5. Measure Speed
OK OK [#01]
Measuring...
[#02] Read:16.2MB
Write:10.4MB
USB Duplicator
4. Utility
[Utility]
5. Measure Speed
OK OK [#01]
Measuring...
[#02] Read:16.2MB
Write:10.4MB
9
USB Duplicator
4. Utility
4. Utility
4. Format FAT
OK OK Do Farmat
Confirm?
OK Pass:2 Format
Fall:0 0
[#02] SIZE:3817M
Format Complete
Table des matières
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur