TYAN Tank GT25 (B5381) Guide de démarrage rapide

Tank GT25

B5381

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer.

Version 1.2

Disclaimer

Information contained in this document is furnished by MiTAC Inter-

national Corporation and has been reviewed for accuracy and reli-

ability prior to printing. MiTAC assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or

use of MiTAC products including liability or warranties relating to fit-

ness for a particular purpose or merchantability. MiTAC retains the

right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will MiTAC be held liable for

any direct or indirect, incidental or consequential damage, loss of

use, loss of data or other malady resulting from errors or inaccura-

cies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN®and Tank GT25 B5381 are trademarks of MiTAC Interna-

tional Corporationn.

Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-

ration.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try one or more of the following mea-

sures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer or an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 2004/108/EC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Tank GT25. This manual is intended for experienced users and inte-

grators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter 1: Provides an introduction to the GT25 B5381 bare-

bones, packing list, describes the external compo-

nents, gives a table of key components, and pro-

vides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI-X card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Chapter 4: Covers details of BIOS Setup.

Chapter 5: Covers information on Beep Codes, Flash Utility

and BIOS Post Code.

Chapter 6: Provides information on installing SMDC cards.

Appendix: Describes how to make a driver diskette. The

cable connection tables is also provided for refer-

e n c e o f s y s t e m s e t u p .

For information on the SAS controller software, please refer to the

following web sites:

ftp://ftp.tyan.com/manuals/m_install_LSI-SAS.pdf

ftp://ftp.tyan.com/manuals/m_LSI_SAS_1068E.pdf

SAFETY INFORMATION

Before installing and using the Tank GT25, take note of the following

precautions:

–Read all instructions carefully.

–Do not place the unit on an unstable surface, cart, or stand.

–Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

–Only use the power source indicated on the marking label. If

you are not sure, contact the power company.

–The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

–Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–Follow all warnings and cautions in this manual and on the

unit case.

–Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

–When replacing parts, ensure that you use parts specified by

the manufacturer.

–When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

–Avoid using the system near water, in direct sunlight, or near

a heating device.

–Cover the unit when not in use.

Table of Contents

Chapter 1:Overview

1.1 About the Tank GT25 B5381 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.5 FRU List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Chapter 2:Setting Up

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . .29

2.3 Installing the External Hard Drive . . . . . . . . . . . . . . . . . . . . . . . .40

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . .42

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .49

3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .53

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . .55

3.8 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Chapter 4:BIOS Setup

4.1 About the BIOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

4.2 BIOS Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

4.3 Advanced Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

4.4 Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

4.5 Power Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

4.6 Boot Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

4.7 Exit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Chapter 5:Diagnostics

5.1 Beep Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

5.2 Flash Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

5.3 BIOS POST Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Chapter 6:Setting Up SMDC

6.1 Installing SMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

6.2 SMDC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Appendix I: Cable Connection Tables

Appendix II: How to Make a Driver Diskette

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Tank GT25 B5381

Congratulations on your purchase of the TYAN®TankTM

GT25 B5381, a highly-optimized rack-mountable barebone

system. The Tank GT25 B5381 is designed to support dual

Intel®Xeon® 5000 series processors, providing a rich feature

set and incredible performance. Leveraging advanced tech-

nology from Intel, the Tank GT25 B5381 server system is

capable of offering scalable 32 and 64-bit computing, high-

bandwidth memory design, and a lightning-fast PCI-E bus

implementation. The TankTM GT25 B5381 not only empowers

your company in today’s demanding IT environment but also

offers a smooth path for future application usage.

TYAN®is also proud to deliver the TankTM GT25 B5381 in

SATA flavor while supporting up to four (4) hot-swap hard

drives and one (1) slim DVD-ROM. The TankTM GT25 B5381

uses TYAN®’s latest tooling-made chassis featuring a robust

structure, tool-less and modularized design, and a solid

mechanical enclosure. All of this provides the TankTM GT25

B5381 the power and flexibility to meet the needs of nearly

any server application.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

– (4) 3.5” HDD bays

– (1) slim FDD (optional)

– (1) slim line DVD-ROM bay

• Dimensions: D 27.87 x W 17.17 x H

1.71 inch (708x436x43.5mm)

Processor

• Dual LGA771 sockets

• Supports up to two Intel®Xeon®

5000 series processors

• 667/1066/1333MHz FSB

Chipset

• Intel 5000P Memory Controller Hub

• Intel ESB2-E I/O Controller Hub

• Winbone W83627EHG Super I/O

chip

• ADT7463 Hardware Monitoring IC

(on fan board)

• On board LSI1068E SAS controller

Memory

• 12 dual ranked DDRII 533/667 FBD

sockets

• Supporting up to 48GB memory

size

• Four channels of Fully Buffered

DIMM (FBD)

• Supports up to 4GB FB-DDRII

DIMM

Expansion Slots

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x8 PCI-E slot, support-

ing (1) full height/full length add-on

PCI-X (M2055) or PCI-E (M2082)

card

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x8 PCI-E slot, support-

ing (1) low-profile PCI-X (M2057) or

PCI-E (M2086) add-on card

• 2 usable expansion slots

Back I/O Ports

• (1) PS/2 mouse & keyboard port

• (1) 9-pin UART serial port

• (1) 15-pin VGA port

• (2) RJ-45 10/100/1000 ports

• (2) USB 2.0 ports

• (1) 4-port SAS connector (SSF-

8470)

Front Panel Features

•I/O

– (2) USB 2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LEDs

– System warning LED

–IDLED

•Switches

– Power

– Reset

–NMI

–ID

Integrated Storage Controller

• Supports 8-port SAS: 4 ports for

internal connection and 4 ports for

external storage connection

Storage

• B5381G25W4HR/W4H: supports

(4) hot-swappable SAS HDD with

RAID 0, 1, 1E

• Pre-installed slim type DVD-ROM

Networking

• Dual Gigabit Ethernet ports (ESB2

embedded MAC with Intel i82563EB

PHY)

Video

• ATI ES1000 with 16MB frame

buffer

Motherboard

•TYAN

®S5381 system board

• Customized 15”x16” (381x406mm)

BIOS

• PHOENIX BIOS on 8Mbit LPC

Flash ROM

• Serial Console Redirect

• Supports APM 1.2 and ACPI 2.0

• PnP, DMI 2.0, WfM 2.0 power man-

agement

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TYAN Serveur

TYAN

TYAN Transport TN27 B4987 Manuel utilisateur

TYAN

TYAN FT77B-B7059 Guide de démarrage rapide

TYAN

TYAN TS75-B8252 Guide de démarrage rapide

TYAN

TYAN FS65-B5521 Guide de démarrage rapide

TYAN

TYAN Transport VX50 (B4985 Series) Manuel utilisateur

TYAN

TYAN Transport GT20-B2925 Manuel utilisateur

TYAN

TYAN Transport GT28 B2935 Manuel utilisateur

TYAN

TYAN Transport GT20 B5151 Manuel utilisateur

TYAN

TYAN FT48 B7025 Manuel utilisateur

TYAN

TYAN Transport TA26-B3892 Manuel utilisateur

TYAN

TYAN Tank TA26 B5397 Manuel utilisateur

TYAN

TYAN TS65A-B8036 Guide de démarrage rapide

TYAN

TYAN Transport GT14 B2933 Manuel utilisateur

TYAN

TYAN GT24-B7066 Guide de démarrage rapide

TYAN

TYAN GN70-B8236 Guide de démarrage rapide

TYAN

TYAN GA80-B7081 Guide de démarrage rapide

TYAN

TYAN GT24 B7016 Manuel utilisateur

TYAN

TYAN B8226 Guide de démarrage rapide

TYAN

TYAN YR190-B8228 Manuel utilisateur

TYAN

TYAN KGT24-500 Guide de démarrage rapide

TYAN

TYAN Transport TX46 B4985-E Manuel utilisateur

TYAN

TYAN FT68-B7910 Guide de démarrage rapide

TYAN

TYAN TN76A-B8242 Guide de démarrage rapide

TYAN

TYAN Transport GX28 B2882 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur