TYAN Transport GT24 B2881 Guide de démarrage rapide

Transport GT24

B2881

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport GT24 B2881 are trademarks of TYAN Com-

puter Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD

Corporation.

AMI, AMIBIOS, and combinations thereof are trademarks of Phoe-

nix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Transport GT24, and consists of the following sections:

Chapter 1: Provides an Introduction to the Transport GT24

B2881 bare-bones, packing list, describes the

external components, gives a table of key compo-

nents, and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

Conventions

The following conventions are used in the manual:

Note: Calls attention to important information.

Warning: Provides information to prevent harm

to user or damage to equipment.

SAFETY INFORMATION

Before installing and using the Transport GT24, take note of the fol-

lowing precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

Table of Contents

Chapter 1:Overview

1.1 About the Transport GT24 B2881 . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Product Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.5 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5.1 System Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.5.2 System Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.5.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.5.4 System Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.5.5 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.5.6 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . .16

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .19

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 25

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 25

2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . .26

2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2.2.4 Installing a PCI-X Card . . . . . . . . . . . . . . . . . . . . . . . . . . .29

2.3 Installing the Hard Drive for B2881G24S4-LC . . . . . . . . . . . . . . 31

2.4 Installing the Hard Drive for B2881G24S4H/U4H . . . . . . . . . . . 33

2.5 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.6 Installing the Slim CD-ROM or DVD-ROM

(for B2881G24S4-LC only)...........................................................37

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 43

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 43

3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 43

3.5 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .46

3.6 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . .48

3.6.1 M1012 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 49

3.6.2 M1012 Adapter Board Connector Pin Definition . . . . . . . 50

3.6.3 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.7 Replacing the SATA or SCSI Backplane . . . . . . . . . . . . . . . . . . . 57

3.7.1 SATA Backplane (M1204) Features . . . . . . . . . . . . . . . . . 59

3.7.2 SCSI Backplane (M1205) Features . . . . . . . . . . . . . . . . . . 62

3.8 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Transport GT24 B2881

Congratulations on your purchase of the TYAN TransportTM

GT24 (B2881), a highly-optimized rack-mountable barebone

system. The Transport GT24 (B2881) offers the latest in dual

processor server systems, providing a rich feature set and

incredible performance. Leveraging advanced technology

from AMD®, the Transport GT24 (B2881) based server sys-

tem are capable of offering scalable 32 and 64-bit computing,

high-bandwidth memory design, and a lightning-fast PCI-X

bus implementation. The TransportTM GT24 (B2881) not only

empowers your company in today’s demanding IT environ-

ment but also offers a smooth path for future application

usage.

The TransportTM GT24 (B2881) uses TYAN’s latest tooling-

made chassis featuring a robust structure, tool-less and mod-

ularized design, and a solid mechanical enclosure. All of this

provides the TransportTM GT24 (B2881) the power and flexi-

bility to meet the needs of nearly any server application.

2 Chapter 1: Overview

1.2 Product Models

B2881G24S4H

B2881G24U4H

B2881G24S4-LC

Model HDD Bays Hot-Swap

Support

HDD

Backplane

B2881G24U4H Removable,

4 HDDs Yes 4-port Ultra

SCSI

B2881G24S4H Removable,

4 HDDs Yes 4-port SATA

B2881G24S4-LC Internal (Fixed),

4 HDDs No None

Table des matières

Autres manuels TYAN Matériel réseau

TYAN

TYAN GT62D-B7106 Guide de démarrage rapide

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur