TW Audio BBT24 Manuel utilisateur
Assembly
Instructions
BBT24
Assembly Instructions BBT24
2
Introduction
The bracket BBT24 is an accessory for the T24(N) loudspeaker.
It is characterized by a subtle look, a remarkable size to weight ratio and ease of use.
Instructions in this user manual
NOTE
TIP
CAUTION
WARNING
Thank you for choosing a high-quality product “MADE IN GERMANY” from the brand
TW AUDiO.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this assembly guide. If you require additional copies of this manual,
you can obtain them free of charge from TWAUDiO or download them from www.twaudio.de
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Tip” identifies additional information or
notes that will simplify working with TWAUDiO products on the basis of practical experience.
WARNING
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
Assembly Instructions BBT24
3
Notes on the products
Read manual
before use!
Before using the device, carefully read the assembly instructions and keep it with the
BBT24 bracket.
General information
Assembly instructions: OM-BBT24
Version 2.0 en, 08/2022
© by TWAMBO 2022; all rights reserved.
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAMBO.
TWAMBO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TWAMBO reserves the right to update this document based on recent developments.
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
Assembly Instructions BBT24
4
Content
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical data ................................................................................................................ 8
3.1 Data sheet............................................................................................................... 8
4. Commissioning............................................................................................................... 9
4.1 Setup ...................................................................................................................... 9
4.2 Use without or with MCT main cradle frame ............................................................ 9
4.3 Wind load ................................................................................................................ 9
4.4 Preparing BBT24 bracket ...................................................................................... 10
4.5 Preparing T24(N) loudspeaker ............................................................................... 11
4.6 Mounting step 1 - BBT24 bracket ......................................................................... 12
4.7 Mounting step 2 - BBT24 bracket ......................................................................... 12
4.8 Mounting step 3 - BBT24 bracket ......................................................................... 13
4.9 General safety instructions for setting up the following rigging variants................... 13
4.10 Variant: 1x BBT24 bracket with 1x T24(N) loudspeaker........................................ 14
4.11 Standard as well as maximum Variant.................................................................. 15
5. Transport and storage .................................................................................................. 16
6. CE Conformity Declaration............................................................................................ 17
7. Disposal ....................................................................................................................... 17
Assembly Instructions BBT24
5
1. Safety | Intended use
The BBT24 bracket was developed for use in professional sound systems. The bracket may
only be used by trained and qualified personnel.
The BBT24 bracket may only used with the T24(N) loudspeaker.
This rigging manual describes how to use the BBT24 bracket correctly. Any other use shall
be deemed improper and may result in damage or even injury.
Modifications or alterations to individual parts of the BBT24 bracket are not permitted! Danger
to life!
WARNING
Before every operation, check the scope of delivery of the BBT24 bracket for its complete-
ness and ensure that all parts are in perfect condition.
The scope of delivery includes specified components. Only use the recommended and cer-
tified components.
WARNING
The BBT24 bracket is designed both for indoor and outdoor use.
CAUTION
The BBT24 bracket may only be used by trained and qualified personnel. Personnel must
check the BBT24 bracket for suitability before each use.
WARNING
The BBT24 bracket must be taken out of operation immediately as soon as visible damage
to the parts can be seen.
WARNING
Please keep all elements of the BBT24 bracket away from children! The small parts can easily
be swallowed and lead to suffocation!
WARNING
Please adhere to the following safety instructions to avoid risks when using accessories.
Note the operating modes described in this assembly instructions. Other uses are not per-
missible.
Damage caused by improper use is not covered by TWAMBO.
Assembly Instructions BBT24
6
The payload of the BBT24 bracket is designed of not more than six T24(N) loudspeaker. The
following additional components are required for this: CBT24 cradle bar for flying, BCT24 rig-
ging adapter and BLT24 Boxlink connecting cables on both sides of the T24(N) loudspeaker.
Do not exceed this payload.
WARNING
When moving (assembling, dismantling, maintaining) the BBT24 bracket with T24(N) loudspe-
aker, ensure sufficient space to prevent collisions with other objects.
WARNING
Do not squeeze or twist the electrical cables of the T24(N) loudspeaker during the installa-
tion of the BBT24 bracket! The respective national electrotechnical rules and regulations are
applicable.
CAUTION
Before mounting the BBT24 bracket check that e.g. trusses or ceilings are capable to carrying
the payload of the components.
WARNING
WARNING
WARNING
Make sure that no water pipes, electrical lines or any other lines are behind the intended place
of mounting.
Only use wall plugs and screws which are suitable for the intended mounting and structural
fabric. All screws must be set and tightened properly. Ensure that the fixing holes have the
correct depth and diameter. Always use all fixing holes.
When working with heavy loads exceeding 20 kg (44 lbs.), use suitable aids (dollies, hoisting
slings, etc.). Multiple persons may be required depending on the situation.
NOTE
WARNING
All screw connections should be checked when the BBT24 bracket is installed. If there are
loose screws, tighten them. If this is no longer possible, the screws and nuts must be repla-
ced.
When assembling and disassembling your system setups, make sure that you never care-
lessly remove the quick-locking pins of the BBT24 bracket with your fingers, hands or other
body parts or reach between the speakers. Due to the gravity of the upper part, it can fall
backwards or forwards.
There is a danger of crushing!
WARNING
Assembly Instructions BBT24
7
2. Overview
2.1 Components
1. Quick-locking pin 12 x 30..................................................................................1 piece
2. Upper part, hinged ............................................................................................ 1 piece
3. Quick-locking pin 8 x 30....................................................................................1 piece
4. Track .................................................................................................................1 piece
Figure 2.1 - Overview
4
3
2
1
Assembly Instructions BBT24
8
3. Technical data
Maximum load capacity:
for 1x BBT24 bracket
in combination with:
1x CBT24 cradle bar for flying and
1x BCT24 rigging adapter
1x T24N
Maximum load capacity:
for 6x BBT24 bracket
in combination with:
1x CBT24 cradle bar for flying,
1x BCT24 rigging adapter and
10x BLT24 Boxlink-connecting cab-
les on both sides of the
T24(N) loudspeakers
6x T24N
Dimensions (h x w x d) 731 x 105 x 98 mm [28.78 x 4.13 x 3.86 in]
Weight 2,1 kg [4.62 lbs]
Surface Powder-coated
3.1 Data sheet
Assembly Instructions BBT24
9
4.1 Setup
The BBT24 bracket is designed for hanging operation. TWAUDiO provides a wide range of
accessories to securely attach the bracket.
NOTE
4. Commissioning
4.3 Wind load
WARNING
WARNING
TW AUDiO recommends using only the accessories specified by TWAUDiO for securing and
mounting loudspeakers.
Before setting up the system outdoors, consider unexpected wind conditions at the opera-
tion site!
Disassemble your system immediately when wind speeds exceed 8 bft (34 to 40 kn / 62 to
74 kph / 38.5 to 46 mph) and secure the system components!
Make sure that there are no persons in the immediate vicinity of the system structure!
Make sure that the system structures are not operated over the audience at wind speeds in
excess of 6 bft (22 to 27kn / 39 to 49kph / 24.2 to 30.45mph) and that there are no persons
in the immediate vicinity of the system structure!
Please note that setting up the BBT24 bracket always requires two persons!
WARNING
4.2 Use without or with MCT main cradle frame
Note that when used without the MCT24 main cradle frame, the BBT24 bracket can only be
used in combination with the CBT24 cradle bar for flying as well as the BCT24 rigging adap-
ter for using T24(N) speakers!
WARNING
WARNING
Note that when used with the MCT24 main cradle frame, the BBT24 bracket can only be
used in combination with the BAT24 adapter as well as the CBT24 cradle bar for flying for
using T24(N) speakers!
Assembly Instructions BBT24
10
4.4 Preparing BBT24 bracket
Figure 4.4 - Loosen the quick-locking pins
lower
locking pin
upper
locking pin
Loosen both quick-locking pins on the upper part of the bracket and fold it open as shown
in figure 4.4.
NOTE
When assembling and disassembling your system setups, make sure that you never care-
lessly remove the quick-locking pins of the BBT24 bracket with your fingers, hands or other
body parts or reach between the speakers. Due to the gravity of the upper part, it can fall
backwards or forwards.
There is a danger of crushing!
WARNING
Table des matières
Autres manuels TW Audio Support et étagère
TW Audio
TW Audio VERARF600i Manuel utilisateur
TW Audio
TW Audio SBT24 Manuel utilisateur
TW Audio
TW Audio SBM12 Manuel utilisateur
TW Audio
TW Audio WPC5 Manuel utilisateur
TW Audio
TW Audio QBM12i Manuel utilisateur
TW Audio
TW Audio GSP20 Manuel utilisateur
TW Audio
TW Audio WHF Manuel utilisateur
TW Audio
TW Audio QBT20i Manuel utilisateur
TW Audio
TW Audio QBM6 Manuel utilisateur
TW Audio
TW Audio CBH30 Manuel utilisateur
TW Audio
TW Audio BCT24 Manuel utilisateur
TW Audio
TW Audio SBM6 Manuel utilisateur
TW Audio
TW Audio MKC5 Manuel utilisateur
TW Audio
TW Audio SBT20 Manuel utilisateur
TW Audio
TW Audio VERA ORF900 Manuel utilisateur
TW Audio
TW Audio SFV20 Manuel utilisateur
TW Audio
TW Audio FDB30 Manuel utilisateur
TW Audio
TW Audio BLS Manuel utilisateur
TW Audio
TW Audio GSP20 Manuel utilisateur
TW Audio
TW Audio VERA GSK36 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
