Turbosound TSB-110 Manuel utilisateur

TSB-110

SUB-BASS LOUDSPEAKER

QUICK START GUIDE

Turbosound Ltd.

Star Road, Partridge Green

West Sussex RH13 8RY England

Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155

web: www.turbosound.com

Version 1.1 ©Turbosound 8/2008

quick start

TSB-110

TSB-110 quick start guide

Page 2

TSB–110 CONFIGURATIONS

The TSB-110 is a general purpose band-pass subwoofer designed to add low frequency

reinforcement to Turbosound loudspeakers such as the IMPACT50, IMPACT80, TCS-30, TCS-35,

TXD-081 and TQ-308.

The TSB-110 utilises a dual voice-coil 10” low frequency driver with two configurable 4 ohm voice

coils. In its ‘as shipped’ configuration the two inputs and two outputs are set up so that the bass

cabinet can be driven by the left and right channel of a standard two channel (stereo) power

amplifier. The input connections are labelled left and right on the spring terminals and are also

present at the 1+, 1- (left) and 2+, 2- (right) connections on the Speakon NL4MP socket. Outputs are

available through the spring terminals only.

The inputs drive the two voice coils separately via a 150hz low-pass first order filter. The satellite

speaker outputs are provided via a high-pass first order filter at 150Hz.

Amplifier considerations

Turbosound speaker enclosures should be driven by high quality power amplifiers designed for

true professional use. Such amplifiers will have balanced inputs, DC and RF fault protection, and

well designed cooling systems for reliability. Turbosound power amplifiers such as the T-45 and T-

25 are recommended for this purpose.

The program power listed in the loudspeaker’s technical specification is the best guide to the size

of amplifier required for general purpose applications. The amplifier should therefore be capable

of delivering long term broadband power equal to the loudspeaker’s program power rating at the

loudspeaker’s stated nominal impedance. This approach allows sufficient headroom to generate

good dynamic range.

In general, the more powerful the amplifier, the better it will sound, provided that it is not driven

into sustained clipping. It should be understood that overdriving an insufficiently powered

amplifier is more likely to cause loudspeaker damage – the total energy in a heavily clipped signal

is far higher than in an unclipped signal – than operating a more powerful amplifier within its

ratings.

RECOMMENDED AMPLIFIER POWER RATINGS:

The amplifier's rated r.m.s. continuous power output (20Hz – 20kHz, each

channel) should be 2 x 300 watts at 4 ohms per channel.

Single coil (8 ohm) configuration

The TSB-110 can be configured as a single 8 ohm sub-bass unit if required by effectively patching

the two voice coils in series. To do this, remove the connector dish housing the spring terminals

by removing the six cross-head fixing screws and lifting it out and away from the cabinet as far as

the internal wiring will allow.

quick start

TSB-110

TSB-110 quick start guide

Page 3

Locate the four jumper locations on the circuit board, labelled J1, J2, J3, and J4. The unit is

shipped with J2 and J4 connected with J1 and J3 not connected (dual 4 ohm mode). For single 8

ohm operation unplug J2 and J4 and transfer the jumpers to J1 and J3. This connects the two

voice coils in series and transfers the input to the left input only (pins 1+ and 1- on the Speakon

NL4MP). Note: In single coil mode DO NOT use the right inputs and outputs as this will result in

incorrect operation and may damage loudspeakers and amplifiers.

Technical Specifications

Dimensions 330mm x 585mm x 330mm (13” x 23” x 13”)

Net weight 16.5 kg (36.3 lbs)

Frequency Response 45Hz to 180Hz

Power Handling 300 watts r.m.s., 600 watts program

Nominal Impedance 2 x 4 ohms

Sensitivity 95dB, 1 watt @ 1metre

Calc. Max SPL 120dB continuous, 126dB peak

Crossover Built-in high pass crossover network at 150Hz

Construction 15mm (5/8”) birch plywood

Rigging 4 x M10 internal rigging points

Options TurboBlue or white semi-matt textured paint

Spares & Accessories LS-1019.2 10” LF driver (requires M5 x 35 fixing bolts)

RC-1019.2 recone kit

TSB-110 Configured for 8 ohms TSB-110 Configured for 2 x 4 ohms

quick start

TSB-110

TSB-110 quick start guide

Page 4

WARRANTY

Limited Warranty

This Turbosound loudspeaker product is warranted to the original end-user purchaser and all

subsequent owners for a period of two (2) years for loudspeakers from the original date of

purchase.

Warranty Coverage

Warranty coverage includes defects in materials and workmanship. It does not include:

•damage caused by accident, misuse, abuse, neglect or modification by any person other

than an authorised Turbosound representative,

•damage caused by failure to operate the product in accordance with the instructions

contained in the user manual,

•damage occurring during shipment in transit,

•claims based on any misrepresentation by the seller,

•products which do not have the original components as specified in the product

engineering information,

•products on which the serial number has been removed or defaced.

Shipping

Should any fault develop with a component of your Turbosound system, please return the

product, freight pre-paid, in its original packing carton, along with proof of purchase such as the

original bill of sale or receipted invoice, and a description of the suspected fault to Turbosound

Ltd. (Att: Customer Service), or your local authorised Turbosound representative. The product

serial number must be quoted in all correspondence relating to the claim. Insurance is

recommended, as Turbosound or its representatives are not liable for loss or damage in transit.

Turbosound will pay for return freight costs should repairs be covered under warranty.

Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK

Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UKTurbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK

Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK

t: +44 (0)1403 711447 f

t: +44 (0)1403 711447 ft: +44 (0)1403 711447 f

t: +44 (0)1403 711447 f: +44 (0)1403 710155 www.turbosound.com

: +44 (0)1403 710155 www.turbosound.com: +44 (0)1403 710155 www.turbosound.com

: +44 (0)1403 710155 www.turbosound.com

Table des matières

Autres manuels Turbosound Intervenants

Turbosound

Turbosound Miln series Manuel utilisateur

Turbosound

Turbosound TSB-212 Manuel utilisateur

Turbosound

Turbosound Manchester Series Manuel utilisateur

Turbosound

Turbosound TCS SERIES Manuel utilisateur

Turbosound

Turbosound iX Series Manuel utilisateur

Turbosound

Turbosound QLight TQ-115 Manuel utilisateur

Turbosound

Turbosound iNSPIRE iP300 Manuel utilisateur

Turbosound

Turbosound NuQ102-AN Manuel utilisateur

Turbosound

Turbosound Milan M18 Manuel utilisateur

Turbosound

Turbosound TCI32-T-WH Manuel utilisateur

Turbosound

Turbosound iNSPIRE iP300 Manuel utilisateur

Turbosound

Turbosound TCS52C-T-WH Manuel utilisateur

Turbosound

Turbosound TSTAND-01 Manuel utilisateur

Turbosound

Turbosound TCS62 Manuel utilisateur

Turbosound

Turbosound M12B Manuel utilisateur

Turbosound

Turbosound TFM122M Manuel utilisateur

Turbosound

Turbosound TVX122M Manuel utilisateur

Turbosound

Turbosound iQ8 Manuel utilisateur

Turbosound

Turbosound iNSPIRE iP2000 Manuel utilisateur

Turbosound

Turbosound iQ Series Manuel utilisateur

Turbosound

Turbosound TCS-081C Manuel utilisateur

Turbosound

Turbosound TCS-C50T Manuel utilisateur

Turbosound

Turbosound NuQ82-AN Manuel utilisateur

Turbosound

Turbosound Manchester Series Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur