Audio Connection 4 - 2
Your Preamplifier uses high quality connectors to ensure that maximum signal transfer is
possible, therefore ensure that all cables used for connection to the preamplifier are terminated
with connectors of similar quality. See Diagram 1 for Rear Panel layout.
One pair of connectors are offered for the outputs.. Connect these outputs to the inputs of your
power amplifier. If you are using directional cables ensure the arrows point away from the
preamplifier. Red denotes the right channel and black the left. The quality of this interconnect is
important for sonic clarity, consult your dealer if in doubt.
These outputs provide an audio output suitable for connection to the RECORD input of a tape
deck. The source to be recorded is selected by means of the input selector switch on the right
hand side of the front panel. See Diagram 2.
This terminal is used to ground any inteconnecting leads which have a separate ground
connection.
These inputs are used to connect the audio output of a digital compact disc player or any other
audio hi-fi component that produces output voltage within the range 150mV-3 V.
These inputs are used to connect the audio output of a tape deck or audio section of a video
recorder or any other audio hi-fi component that produces output voltage within the range
150mV - 1V.
These inputs are used to connect the audio output of a tape deck or audio section of a video
recorder or any other audio hi-fi component that produces output voltage within the range
150mV - 1V. If you have a PHONO SEER this input is not functional
Connecting
the Inputs
& Outputs
PRE OUT
REC
GROUND
CD
AUX 1
TAPE
AUX 2
