"reset" "on/off" button
Once you set the schedule in apps, the
blue LED will flash twice, then turn to red.
Blue LED on when
schedule time starts.
Once the batteries are inserted, transmitting
will start and the LED will flash. To turn off,
press on/off once, the red LED will turn off.
The Data logger will start transmitting once batteries are inserted (for main unit) or button
cell batteries are inserted (for external probe)
*LED will flash red when the data logger is transmitting data.
To stop transmitting on central unit press "on/off" swich on the bottom once (flashing
LED will then turn off, indicating that the data is no longer being transmitted). To re-start
transmitting press the "on/off" switch again (LED will flash red again).
To stop transmitting on external probe switch off using the "on/off" button.
"Reset" button on the bottom of the main unit allows user to reset "current" data reading.
You need to use a pin and insert into the reset hole.
Once schedule is set (use app to set), the blue LED will flash twice, then the LED will turn
back to red. When scheduled time starts the LED will turn blue (solid).
