Tsun TSOL-MS2000 Manuel utilisateur

G3 Plus Microinverter

V1.0

1 -

TSOL-MS2000

TSOL-MS1800

TSOL-MS1600

TSOL-MS2000（1500）

TSOL-MS2000（800）

TSOL-MS2000（600）

G3 Plus Microinverter

V1.0

2 -

Trademarks and Permissions

TSUN and other TSUNESS trademarks are trademarks of TSUNESS Co., Ltd. All other

trademarks and trade names mentioned in this document are the property of their respective

holders.

TSUNESS Co., Ltd makes no representations express or implied, with respect to this

documentation or any of the equipment and/or software it may describe, including (with no

limitation) any implied warranties of utility, merchantability, or fitness for any particular

purpose.

All such warranties are expressly disclaimed. Neither TSUNESS nor its distributors or dealers

shall be liable for any indirect, incidental, or consequential damages under any circumstances.

(The exclusion of implied warranties may not apply in all cases under some statutes, and thus

the above exclusion may not apply.)

Specifications are subject to change without notice. Every attempt has been made to make this

document complete, accurate, and up-to-date. Readers are cautioned, however, that TSUNESS

reserves the right to make changes without notice and shall not be responsible for any

damages, including indirect, incidental, or consequential damages, caused by reliance on the

material presented, including, but not limited to, omissions, typographical errors, arithmetical

errors or listing errors in the content material.

All trademarks are recognized even if these are not marked separately. Missing designations do

not mean that a product or brand is not a registered trademark. All trademarks are recognized

as the property of their respective owners.

Product information is subject to change without notice. User documentation is updated

frequently; Check www.tsun-ess.com for the latest information. To ensure optimal reliability

and meet warranty requirements, the TSUN Micro inverter must be installed according to the

instructions in this manual. For warranty text refer to www.tsun-ess.com.

Audience

This manual is intended for use by professional installation and maintenance personnel.

G3 Plus Microinverter

V1.0

3 -

Content

Trademarks and Permissions ............................................................................................................................................- 1 -

Audience...........................................................................................................................................................................- 2 -

Content..............................................................................................................................................................................- 3 -

Read This First..................................................................................................................................................................- 4 -

Important Safety Information..................................................................................................................................................................- 4 -

Product Label..........................................................................................................................................................................................- 4 -

System Introduction..........................................................................................................................................................- 6 -

Product Description ................................................................................................................................................................................- 7 -

Datasheet ................................................................................................................................................................................................- 7 -

Micro inverter Installation ..............................................................................................................................................- 10 -

Pre-installation Check...........................................................................................................................................................................- 10 -

Installation Steps...................................................................................................................................................................................- 10 -

TSUN Monitoring System..............................................................................................................................................- 17 -

Installer.................................................................................................................................................................................................- 17 -

End User ...............................................................................................................................................................................................- 18 -

Remote Active Power Control........................................................................................................................................- 19 -

Self-Test Function for Italy.............................................................................................................................................- 19 -

Fault Code and Troubleshooting.....................................................................................................................................- 20 -

Maintenance Guide.........................................................................................................................................................- 21 -

Routine Maintenance ............................................................................................................................................................................- 21 -

Storage and Dismantling.......................................................................................................................................................................- 21 -

Recycling and Disposal ..................................................................................................................................................- 22 -

Warranty Service.............................................................................................................................................................- 22 -

Exclusions.............................................................................................................................................................................................- 22 -

Distributor Responsibility.....................................................................................................................................................................- 23 -

G3 Plus Microinverter

V1.0

4 -

Read This First

Dear customer, thank you for choosing the G3 Plus series micro inverter from TSUN. We hope

you will find our products meet your needs for renewable energy. Meantime, we appreciate

your feedback regarding our products.

A solar micro inverter, or simply micro inverter, is a plug-and-play device used in

photovoltaics, that converts direct current (DC) generated by a single solar module to

alternating current (AC). The main advantage is that small amounts of shading, debris or, snow

lines on any single solar module, or even a complete module failure, do not disproportionately

reduce the output of the entire array. Each micro inverter harvests optimum power by

performing maximum power point tracking (MPPT) for its connected module. Simplicity in

system design, lower amperage wires, simplified stock management, and added safety are

other factors introduced with the micro inverter solution.

This manual contains important instructions for G3 Plus micro inverters and must be read in its

entirety before installing or commissioning the equipment. For safety, only qualified

technicians, who have received training or have demonstrated skills can install and maintain

this micro inverter under the guide of this document.

Important Safety Information

During installation, testing, and inspection, adherence to all the handling and safety

instructions is mandatory. Failure to do so may result in injury or loss of life and damage to the

equipment.

Product Label

The following safety symbols are used in this document. Familiarize yourself with the symbols

and their meaning before installing or operating the system.

DANGER

· DANGER indicates a hazardous situation that can result in deadly electric shock hazards,

other serious physical injury, or fire hazards.

WARNING

· WARNING indicates directions that must be fully understood and followed in their entirety

to avoid potential safety hazards including equipment damage or personal injury.

CAUTION

G3 Plus Microinverter

V1.0

5 -

· CAUTION indicates that the described operation must not be carried out. The reader should

stop using and fully understand the operations explained before proceeding.

The symbols on the micro inverter are listed below and illustrated in detail.

Symbol

Description

This device is directly connected to the public grid, thus all

work to the

inverter shall only be carried out by qualified personnel.

The components inside the inverter will release a lot of heat durin

operation. Do not touch metal plate housing during operation.

Please read the installation manual first before installation, operation,

and

maintenance.

Unauthorized removal of necessary protections, improper use, incorrect

installation,

and operation may lead to serious safety and shock hazards or

equipment damage.

This device needs to be disconnected and left to stand for a

t least 5 minutes

before opening the cover.

This device SHALL NOT be disposed of in residential waste.

This device fulfills the requirements of the Radio Equipment Directive.

This device complies with the RoHS Directive.

This device fulfills the requirements of INMETRO.

This device fulfills the requirements of ANATEL, the certificate number is

11057-23-15833.

G3 Plus Microinverter

V1.0

6 -

System Introduction

The G3 Plus micro inverter is used in grid-tied applications, comprised of two key elements:



G3 Plus Micro inverter.



TSUN Monitoring System.

The micro inverter converts the DC electricity generated by solar panels into AC electricity

which is in accordance with the requirements of the public grid and sends the AC into the grid,

reducing the load pressure of the grid.

The micro inverter is integrated with the Wi-Fi module and connects to the home Wi-Fi router

directly. Users can monitor the power generation of the system by TSUN Monitoring App.

G3 Plus Microinverter

V1.0

7 -

Product Description

A Mounting Hole D AC Cable

B Grounding Hole E Antenna

DC Cables

Status Light

Datasheet

Model TSOL-MS1600 TSOL-MS1800 TSOL-MS2000

Input Data (DC)

Recommended Module Power (W) 300 - 700+ 300 - 700+ 300 - 700+

Start-up Voltage per Input (V) 22

Rated Input Voltage (V) 42

MPPT Voltage Range per Input (V) 16~60

Max. Input Voltage per Input (V) 60

Max. Short-circuit Current per Input

(A) 25 25 25

Max. Input Current per Input (A) 16 16 16

Quantity of MPPT 4

Max. Inverter Back-feed Current to

the Array (A) 0

Output Data (AC)

Max. Output Power (VA) 1600 1800 2000

Nominal Continuous Output Power

(W) 1600 1800 2000

Nominal Output Current (A) 7 7.8 8.7

Max. Output Current (A) 8 9 10

Inrush Current (A) 12 15 15

Max. Output Fault Current (A) 32 40 40

Max. Output Overcurrent Protection

(A) 18 18 18

Nominal Output Voltage/Range (V)* 220/230/240, 175 – 270, L/N/PE

G3 Plus Microinverter

V1.0

8 -

Nominal Frequency (Hz)* 50/60

Power Factor >0.99 default，0.8 leading … 0.8 lagging

Output Current Harmonic Distortion <3%

Efficiency

Peak Inverter Efficiency 96.7% 96.7% 96.7%

CEC Weighted Efficiency 96.5% 96.5% 96.5%

Nominal Mppt Efficiency 99.9% 99.9% 99.9%

Nighttime Power Consumption <50mW <50mW <50mW

Protection

Anti-Islanding protection

Integrated

Insulation monitoring

Integrated

AC surge protection

TYPE II

AC overcurrent protection Integrated

AC short-circuit protection Integrated

AC overvoltage protection Integrated

Over-heat protection Integrated

Mechanical Data

Dimensions (W×H×D mm) 331 * 261 * 44

Weight [kg] 5.5

General Data

Display

LED indicators; TSUN APP+WEB

Communication

built-in WiFi module

Type of Isolation Galvanically Isolated HF Transformer

Type of Enclosure IP67

Protection Class I

Cooling Natural convection

Operating Ambient Temperature

Range -40 ~ +65 (derating of over 50°C Ambient Temperature)

Relative Humidity 100%

Max. Operating Altitude Without

Derating [m] 2000

※The AC voltage and frequency range may vary depending on specific country grid.

Model TSOL-MS2000(600) TSOL-MS2000(800) TSOL-MS2000(1500)

Input Data (DC)

Recommended Module Power (W) 300 - 700+ 300 - 700+ 300 - 700+

Start-up Voltage per Input (V) 22

Rated Input Voltage (V) 42

MPPT Voltage Range per Input (V) 16~60

Max. Input Voltage per Input (V) 60

Max. Short-circuit Current per Input

(A) 25 25 25

Max. Input Current per Input (A) 16 16 16

Quantity of MPPT 4

Max. Inverter Back-feed Current to 0

G3 Plus Microinverter

V1.0

9 -

the Array (A)

Output Data (AC)

Max. Output Power (VA) 600 800 1500

Nominal Continuous Output Power

(W) 600 800 1500

Nominal Output Current (A) 2.6 3.6 6.52

Max. Output Current (A) 3 4 7.5

Inrush Current (A) 5 6 12

Max. Output Fault Current (A) 14 16 32

Max. Output Overcurrent Protection

(A) 8 8 18

Nominal Output Voltage/Range (V)* 220/230/240, 175 – 270, L/N/PE

Nominal Frequency (Hz)* 50/60

Power Factor >0.99 default，0.8 leading … 0.8 lagging

Output Current Harmonic Distortion <3%

Efficiency

Peak Inverter Efficiency 96.7% 96.7% 96.7%

CEC Weighted Efficiency 96.5% 96.5% 96.5%

Nominal Mppt Efficiency 99.9% 99.9% 99.9%

Nighttime Power Consumption <50mW <50mW <50mW

Protection

Anti-Islanding protection

Integrated

Insulation monitoring Integrated

AC surge protection TYPE II

AC overcurrent protection Integrated

AC short-circuit protection Integrated

AC overvoltage protection Integrated

Over-heat protection

Integrated

Mechanical Data

Dimensions (W×H×D mm) 331 * 261 * 44

Weight [kg] 5.5

General Data

Display LED indicators; TSUN APP+WEB

Communication built-in WiFi module

Type of Isolation Galvanically Isolated HF Transformer

Type of Enclosure IP67

Protection Class I

Cooling Natural convection

Operating Ambient Temperature

Range -40 ~ +65 (derating of over 50°C Ambient Temperature)

Relative Humidity 100%

Max. Operating Altitude Without

Derating [m] 2000

※The AC voltage and frequency range may vary depending on specific country grid.

G3 Plus Microinverter

V1.0

TSUNESS Co., Ltd declares that the radio equipment (Micro inverter) complies with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet

address: https://www.tsun-ess.com/File/$random-2023-07-15-061950--45dN$MQ

OPERATING FREQUENCY (the maximum transmitted power)

2412MHz—2472MHz(EIRP ＜20dBm)

2402MHz—2480MHz(EIRP ＜10dBm)

Micro inverter Installation

Pre-installation Check

Check the Package

Although TSUN’s micro inverters have surpassed stringent testing and are checked before they leave

the factory, it is uncertain that the micro inverters may suffer damage during transportation. Please

check the package for any obvious signs of damage, and if such evidence is present, do not open the

package and contact your dealer as soon as possible.

Check the Installation Environment and Position

When choosing the position of installation, comply with the following conditions:

To avoid unwanted power derating due to an increase in the internal temperature of the inverter,

do not expose it to direct sunlight.

To avoid overheating, always make sure the flow of air around the inverter is not blocked.

Do not install in places where gasses or flammable substances may be present.

Avoid electromagnetic interference that can compromise the correct operation of electronic

equipment.

It’s recommended to install micro inverter on structures underneath the photovoltaic modules so

that they work in the shade without touching the rooftop.

Use a mobile phone to check the Wi-Fi signal strength at the micro inverter installation position. If

the Wi-Fi signal is weak, try to install the micro inverter in another place with a better signal, or

move the Wi-Fi router or repeater closer.

Installation Steps

DANGER

·Only qualified personnel should install, troubleshoot, or replace G3 Plus micro inverters or

the cable and accessories.

·Before installation, check the unit to ensure the absence of any transport or handling damage,

which could affect insulation integrity or safety clearances.

Autres manuels pour TSOL-MS2000

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Tsun Instrument de mesure

Tsun

Tsun Talent-MG2-WU Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur