TSS Half Rack Manuel utilisateur

Half Rack

Read all safety warnings, instructions and

illustrations provided for this piece of strength

equipment. Failure to follow all instructions listed

below may result in serious injury or death. User assumes all potential

risks of assembly or use of this product.

PERSONAL SAFETY

●Stay alert, watch what you are doing when assembling and operating the

strength equipment. Do not use the strength equipment while you are

tired or under the influence of drugs, alcohol or medication. A moment

of inattention while operating or assembling the strength equipment may

result in serious or fatal injury.

EQUIPMENT USE AND CARE

●Visually inspect all components in order to identify potential

deformation or damage. If damages are observed, discontinue assembly

and contact the manufacturer at [email protected],

[email protected].

●Multiple components involved with assembly of this piece of strength

equipment are above 50lbs and it is recommended that you have an

additional person to assist in the positioning of these items.

●Ensure that all components are securely fastened before use.

1

Required Tools

●Crescent Wrench

●9/16” Socket and Wrench

Parts

HFR-001 |(x2) |Part A

HFR-002 |(x1) |Part B

HFR-003 |(x1) |Part C

HFR-004 |(x2) |Part D

HFR-005 |(x2) |Part E

HFR-006 |(x2) |Part F

HFR-007 |(x10) |Part G

2

HFR-008 |(x2) |Part H

⅜” x 3.75” Bolt |(x20) |Part I

⅜” Flat Washer |(x8) |Part J

⅜” Lock Nut |(x18) |Part K

CR-200 |(x2) |Part L

3

Assembly

Parts A, B, and C are organized

in the manner displayed in image

1.

*Repeat image above for all

holes in part B*

4

The top hole of parts A and C

will require parts I and J as seen

in image 4.

5

Part G will be placed and

attached as seen in image 5.

Part H will be attached with part

G as seen in image 6 using the

same hardware as image 5.

6

Place parts E and F in the desired location.

Place part D in the desired location and attach using part L as seen in

image 7.

7

You have now completed assembling your very own Half Rack! Thank

you for choosing Texas Strength Systems for your fitness needs. If you

have any questions, comments, or concerns please don’t hesitate to

contact our staff.

Contact Information

Email: [email protected]

Phone: (210) 233-6110, (210)-920-4877

8

Table des matières

Autres manuels TSS Support et étagère

TSS

TSS 3x3 Power Rack with Belt Squat Manuel utilisateur

TSS

TSS Combo Rack Manuel utilisateur

TSS

TSS 2.5 x 2.5 Power Rack with In-Line Weight... Manuel utilisateur

TSS

TSS 6-in-1 Yoke Manuel utilisateur

TSS

TSS 3x3 Power Rack with Hi/Low Cable System Manuel utilisateur

TSS

TSS 3x3 Power Rack with Hi/Low Cable System Manuel utilisateur

TSS

TSS 2.5 x 2.5 Power Rack with Belt Squat Manuel utilisateur

TSS

TSS Basic 2.5x2.5 Power Rack Manuel utilisateur

TSS

TSS 3x3 Power Rack with In-Line Weight Storage Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur