Trust 12276 Manuel utilisateur

Trust 4 Port Stackable USB HUB

Introduction

This instruction manual is intended for users of the Trust 4 Port Stackable USB HUB.

Basic knowledge of computers is sufficient to be able to install this product. Please consult one of

the Trust Customer Care Centers if you have any problems. You can find more information at the

back of this instruction manual.

-The Trust 4 Port Stackable USB HUB can be used to connect more than one USB

device to your PC at the same time.

The connection to your PC is made using the USB cable provided. This ensures

fast communication between the HUB and your PC.

1. Installing / Connecting

This device must be connected to your computer before it can be used.

Follow the steps below to connect it safely to your computer.

Note: Turn your computer off before connecting the USB HUB.

The USB HUB stand can be installed in two different ways, either vertically or horizontally. Follow

the instructions given below to assemble the base:

1.1 Vertical

1. Slide the HUB onto the base guide rail as shown in figure 2 until a click is heard.

1.2 Horizontal

1. Slide the three feet on the bottom of the HUB into the three eyes on the base until a click

is heard (see figure 3).

2. If desired, a second HUB can be connected to the first HUB as shown in figure 4.

1.3 Connecting

1.3.1 To the computer

The USB cable provided must be connected in order to transfer the data from the USB HUB to

the computer.

Trust 4 Port Stackable USB HUB

CONNECTION DESCRIPTION

A Red LED: is lit when the USB is connected to the mains voltage

B Green LED's: are lit when the USB ports are OK

C USB port: connect your USB devices here

D Connection for the cable to the PC

E Connection for the adapter

1. Insert the round power adapter plug into connection C (see figure 1).

2. Insert the power adapter plug into the plug socket.

3. Insert the USB cable with the hexagonal plug into connection A on the USB HUB

(see figure 1).

4. Connect the other end of the USB cable with the flat plug to a free USB connection on

your computer (see figure 5).

1.3.2 To an existing HUB

If desired, the Trust 4 Port Stackable USB HUB can also be connected to an already installed

HUB (see figure 6).

1.4 Connecting peripheral devices

Use the cable provided with the device to connect it to the USB HUB. See the instruction manual

for the device concerned for instructions on how to do this. The peripheral devices should each

be connected to one of the four USB connections on the rear of this USB HUB.

1.5 Installation in Windows

When Windows is started after connecting the USB HUB, Windows will detect new hardware

(General Purpose USB HUB). A driver for this device will be installed automatically. The red LED

will be lit when the power supply is connected and the four green LED's will be lit to show that the

HUB's USB ports work correctly.

If one or more green LED's are not lit, this means that the USB port concerned may be faulty.

Trust 4 Port Stackable USB HUB

2. Troubleshooting

Problem Cause Possible solution

The USB HUB does not have a

power supply.

Connect the power adapter

to the USB HUB.

Connect the USB cable

correctly to the peripheral

device and the HUB.

A new device is not

detected.

The USB cable has not been

connected correctly.

Connect the USB cable

correctly to the computer

and the HUB.

The USB cable has not been

connected correctly.

Connect the USB cable

correctly to the computer

and the HUB.

The USB HUB does not have a

power supply.

Connect the power adapter

to the USB HUB.

‘General Purpose USB

HUB’ is not detected.

USB support is not installed

(Windows 95).

Install USB support. (This

can be found on the

Windows CD-ROM or on the

Internet).

The connected USB

device does not work.

Too much signal loss because

the HUB's have been

connected incorrectly.

Connect the HUB's as

shown in figure 6.

The USB HUB does not have a

power supply.

Connect the power adapter

to the USB HUB.

The red and green LED's

are not lit.

The USB cable has not been

connected correctly.

Connect the USB cable

correctly to the computer

and the HUB.

One or more green LED's

are not lit.

The USB port is faulty. If the guarantee is still valid,

contact your supplier.

Check the FAQ's on the Internet (www.trust.com). You can also register your product at

www.trust.com so that you are able to receive optimal guarantee and service support. You will be

automatically informed of developments to your product and other Trust products. You will also

have the chance of winning some spectacular prizes.

You can find more information about USB at www.usb.org on the Internet.

If you still have problems after trying these solutions, please contact one of the Trust Customer

Care Centers. You can find more information at the back of this instruction manual. Please have

the following information available:

•The article number. This is 12276 / 12277;

•Your hardware information;

•A good description of what does not work;

•A good description of when the problem occurs.

Trust 4 Port Stackable USB HUB

3. Specifications

Upstream 1 B-type port

Downstream 4 A-type ports

Data transfer speed Up to 12MB/s

LED 1 LED (red) for the power

4 LED's (green) for the power to the A-type ports

Short circuit safety device On each port

Output voltage and current 5V DC / 500mA max. per output

Power adapter 5 V DC / 2.69A

Table des matières

Autres manuels Trust Changer

Trust

Trust HU-4440p Manuel utilisateur

Trust

Trust 420F Manuel utilisateur

Trust

Trust ACM-3000H2 Manuel utilisateur

Trust

Trust SECURITY PLUS-LINE AGST-8800 Manuel utilisateur

Trust

Trust START-LINE ACM-2000 Manuel utilisateur

Trust

Trust SECURITY PLUS-LINE AGST-8800 Manuel utilisateur

Trust

Trust 300SB Manuel utilisateur

Trust

Trust APC Starter Set Wireless Switching Manuel utilisateur

Trust

Trust START-LINE ACM-2300-HC Manuel utilisateur

Trust

Trust HU-4445p Manuel utilisateur

Trust

Trust ASUN-650 Manuel utilisateur

Trust

Trust 15919 Manuel utilisateur

Trust

Trust HU-3340p Manuel utilisateur

Trust

Trust 71075 Manuel utilisateur

Trust

Trust SMART Home START-LINE RECEIVER ACM-3500-3 Mode d’emploi

Trust

Trust START-LINE APA3-1500R Manuel utilisateur

Trust

Trust START-LINE AWST-9000Z Manuel utilisateur

Trust

Trust START-LINE AGST-8802 Manuel utilisateur

Trust

Trust 11670 Manuel utilisateur

Trust

Trust START-LINE ACM-2300-HC Manuel d'utilisation

Trust

Trust 17079 Mise à jour du firmware

Trust

Trust HU-1140P Manuel utilisateur

Trust

Trust SmartHome ACM-1000 Manuel utilisateur

Trust

Trust START-LINE APA3-1500R Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur