Trust Easy Scan 19200 Plus Manuel utilisateur
Easy Scan 19200 Plus
EASY SCAN 19200 PLUS
User’s manual
Version 1.0
Easy Scan 19200 Plus
Thank you
Thank you very much for purchasing this product from the Trust range. We wish you
hours of fun with it. Please read this manual carefully before using the product.
Registration
Register your purchase now at the Trust Internet site (www.trust.com) and you could
win one of the fabulous prizes. The web site is also the place to look for dealer
addresses, comprehensive product information, drivers, and FAQ (Frequently Asked
Questions) sheets.
Copyright Statement
No part of this manual may be reproduced or transmitted, in any form or by any
means, electronic or mechanical, including photocopying, recording, or information
storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the prior written permission of the manufacturer.
Disclaimer Statement
The manufacturer specifically disclaims all warranties, either express or implied,
including but not limited to implied warranties of merchantability and fitness for a
particular purpose, with respect to the software, the product manual(s) and written
materials, and any other accompanying hardware. The manufacturer reserves the
right to revise or make improvements to its product at any time and without obligation
to notify any person of such revisions or improvements.
In no event shall the manufacturer be liable for any consequential or incidental
damages, including any loss of business profits or any other commercial damages,
arising out of the use of its product.
* All company or product names are trademarks or registered trademarks or service
marks of their respective owners.
01 UK 11126 ES19200PLUS.DOC
Easy Scan 19200 Plus
1
Contents
1. Introduction.....................................................................................................2
1.1. Conventions...............................................................................................2
1.2. Contents....................................................................................................2
2. Safety...............................................................................................................4
3. Connecting the scanner..................................................................................5
3.1. Unlocking the transport locks.....................................................................5
3.2. Connecting the scanner .............................................................................6
4. Installing the driver and software...................................................................7
4.1. Installing the driver.....................................................................................7
4.2. Installing TextBridge Classic 2.0 ................................................................9
4.3. Installing Adobe PhotoDeluxe 2.0.............................................................12
5. Making a scan ............................................................................................... 16
5.1. TWAIN main menu..................................................................................16
5.2. Advanced TWAIN menu...........................................................................18
5.3. Monitor calibration...................................................................................20
5.4. Preferences .............................................................................................21
5.5. Making a scan .........................................................................................22
6. Working with Adobe PhotoDeluxe................................................................ 23
6.1. Initial scanner settings .............................................................................23
6.2. Scanning with Adobe PhotoDeluxe...........................................................24
7. Working with TextBridge.............................................................................. 25
7.1. Settings...................................................................................................25
7.2. Scanning with TextBridge Classic.............................................................26
8. Maintenance.................................................................................................. 28
9. Troubleshooting............................................................................................29
9.1. Testing the scanner..................................................................................29
10. Specifications ...............................................................................................32
11. Trust Service Centers...................................................................................33
Easy Scan 19200 Plus
2
1. Introduction
This manual is intended for users of the Easy Scan 19200 Plus scanner. No previous
knowledge is required for installation and use of this product.
Note: This scanner will not work with MS-DOS, Windows 3.1x/NT3.x, or Apple
Macintosh computers.
If you have any questions after reading this manual, please contact one of the
Trust service centres. You will find information on the service centre nearest to
you at the back of this manual. You can also visit the Trust website
(www.trust.com) for support, comprehensive product information, drivers, and
FAQ (Frequently Asked Questions) sheets.
1.1. Conventions
This manual uses the following layout conventions for instructions:
<key> Requires the user to press a key. The key legend is shown between
the angle brackets.
‘System’ This is a software-specific term, e.g. a term used by Windows.
[DIR] Text in this font is to be typed by the user.
(term) The text between the parentheses (….) is the English term, e.g.
(File), referred to in the accompanying illustration.
Additional information is shown as follows:
Note: Switch off the computer before connecting the scanner
The examples assume that your computer system has assigned the letter “D” to your
CD-ROM drive. If your computer uses a different drive designation for your CD-ROM
drive, e.g. “E”, replace “D” in the text with “E”.
1.2. Contents
After unpacking, you should have the following items:
•Scanner
•Power supply adapter
•Interface cable
•CD-ROM with drivers, applications, and user's manual
•Adobe PhotoDeluxe 2.0 CD-ROM
•Quick Installation Manual
Easy Scan 19200 Plus
3
Minimum system requirements
•IBM Compatible PC with Pentium 75MHz CPU and 16 MB RAM
•Microsoft Windows 95 / 98 or Windows NT 4.0
•Printer port (EPP)
•Hard disk drive with at least 60 MB free disk space (for installation)
•4-speed CD-ROM drive
Easy Scan 19200 Plus
4
2. Safety
Read the following instructions carefully before use:
1. Disconnect any power plugs from the mains supply before cleaning the
equipment.
2. Do not use this equipment in humid environments like bathrooms, damp cellars,
swimming pools, etc.
3. Make sure nothing is placed on the power supply lead.
4. Do not insert any objects into the slots in the equipment's casing.
5. Do not attempt to repair this equipment yourself.
6. If any of the following conditions occur, remove the power plug from the mains
supply and have the equipment serviced by qualified personnel:
a) the power lead or plug have become damaged or worn;
b) liquid has entered the equipment;
c) the equipment has been dropped, and/or the casing has become damaged;
7. Do not place this product in direct sunlight. Exposure to direct sunlight or
excessive heat can damage the product.
Easy Scan 19200 Plus
5
3. Connecting the scanner
Note: Switch off the computer before connecting peripheral equipment.
3.1. Unlocking the transport locks
1. The scanner has 2 locks to prevent damage during transport. Before the
scanner can be used, these must be unlocked.
2. The first lock is on the front of the scanner. Slide the lever to the left to unlock
(Figure 1).
Figure 1: Unlocking the transport locks
3. The second lock is on the underside of the scanner. Turn the knob a quarter
turn anti-clockwise to unlock (Figure 2).
Figure 2: Unlocking the transport locks
Easy Scan 19200 Plus
6
3.2. Connecting the scanner
Proceed as follows to connect the scanner to your computer:
1. Switch off the computer and any peripheral equipment.
2. Disconnect the power plug from the mains supply.
3. Disconnect the printer cable plug from the parallel port at the rear of the
computer (if in use).
4. Connect the printer cable (if in use) to the ‘Printer’ connection at the rear of the
scanner (connector A, Figure 3).
5. Take the interface cable supplied and connect it to the parallel port of your
computer.
6. Connect the other end of the cable to the ‘Host’ connection on the scanner
(connector B, Figure 3).
7. Connect the power supply adapter lead to the scanner (connector C, Figure 3).
8. Connect the power supply adapter to the mains supply.
9. Connect the power plug of your computer to the mains supply.
Your scanner (and printer) have now been connected and you are ready to start
installing the driver and application software. You may have to reinstall your printer.
Note: The scanner is switched on and off automatically by the driver. This is
why the scanner has no on/off switch.
Figure 3: Rear view of the scanner
Easy Scan 19200 Plus
7
4. Installing the driver and software
4.1. Installing the driver
In order for you to be able to use your scanner under Windows, the TWAIN driver
and applications software must first be installed.
Close any active programs before installing the software.
1. Start Windows.
2. Insert the application CD-ROM supplied into your CD-ROM drive.
3. Using the mouse, click on ‘Start’ and select ‘Run’.
4. On the command line, type [D:\SETUP.EXE], then click on ‘OK’ (Figure 4).
Figure 4: Installation in Windows 95, 98 and NT 4
5. Using the mouse, select your preferred language for the installation (English,
French, German, Italian, Spanish, Portuguese, or Dutch, see Figure 5). After
you have selected the preferred language, a screen like the one shown in
Figure 6 is displayed.
Figure 5: Language selection
Easy Scan 19200 Plus
8
6. Click on ‘Scanner Driver’. A screen as in Figure 7 is displayed.
Figure 6: Installation menu
7. Click on ‘Next’. The driver is installed.
Figure 7: Driver Installation
8. You have now completed the driver installation. Proceed with section 4.2 to
install TextBridge Classic 2.0.
Autres manuels pour Easy Scan 19200 Plus
1
Table des matières
Autres manuels Trust Scanner
Trust
Trust FLAT SCAN USB19200 Instructions d'utilisation et d'entretien
Trust
Trust FLAT SCAN USB19200 Manuel utilisateur
Trust
Trust 7230 Easy Connect Manuel utilisateur
Trust
Trust Handy Scan Colour Manuel utilisateur
Trust
Trust Easy Scan 9600 Plus Manuel utilisateur
Trust
Trust Easy Connect 9600 Plus Manuel utilisateur
Trust
Trust FLAT SCAN USB19200 Manuel utilisateur
Trust
Trust Easy Scan 19200 Plus Manuel utilisateur
Trust
Trust Easy Scan 19200 Manuel utilisateur
Trust
Trust DIRECT WEBSCAN 19200 Manuel utilisateur
