Icon Name Meaning
Wear gloves. Chips could fly out of the tool.
Wear hearing protection. Noise emission value can be exceeded.
Danger of injury due to rotating
saw.
Do not reach into the saw chain with your hands.
Safety class II Indicates a doubly insulated tool.
Alternating current Type or property of current
V Volt Voltage
A Ampere Current, current input
Hz Hertz Frequency (oscillations per second)
W Watt Power, power input
mm Millimeters Dimensions e.g.: material thickness, chamfer length
in Inch Dimensions e.g.: material thickness, chamfer length
noIdle speed Revolution speed without load
.../min Revolutions/strokes per minute Revolution speed, stroke rate per minute
Tab. 4
2.4 Noise and vibration information
Noise emission value may be exceeded.
ØWear hearing protection.
The vibration emission value can be exceeded!
ØSelect the right tools and exchange them in time in the
event of wear.
ØHave maintenance carried out by trained specialized techni-
cians.
ØDefine additional safety measures for protecting the operator
from the effect of vibrations (e. g. keep hands warm, organi-
zation of working procedures, machining at normal feed
force).
ØDepending on the operating conditions and state of the elec-
tric tool, the actual load might be higher or lower than the
specified measured value.
Health risks especially damage to muscles and joints due
to strong vibrations during operation.
ØCarry out machining at normal feed power.
10 Noise and vibration information E848EN_00
WARNING
WARNING
WARNING
