TrueNAS ES60 Manuel

TrueNAS®ES60 Basic Setup Guide
Version 1.92

Contents
1 Introduction ������������������������������������������������������������������������������������������������������������������������ 1
2 ES60 Components ����������������������������������������������������������������������������������������������������������������� 2
2�1 Front Indicators �������������������������������������������������������������������������������������������������������������� 3
2�2 Rear Components and Ports ����������������������������������������������������������������������������������������������� 3
3 Assemble the Rail Kit ������������������������������������������������������������������������������������������������������������� 4
3�1 Separate Cabinet Rails from Rack Rails ���������������������������������������������������������������������������������� 4
3�2 Mount Cabinet Rails ��������������������������������������������������������������������������������������������������������� 4
3�3 Mount the Rack Rails �������������������������������������������������������������������������������������������������������� 4
4 Rack the ES60 ���������������������������������������������������������������������������������������������������������������������� 5
5 Install Drives ����������������������������������������������������������������������������������������������������������������������� 6
5�1 Remove Top Cover ���������������������������������������������������������������������������������������������������������� 6
5�2 Install Drive Trays ������������������������������������������������������������������������������������������������������������ 6
6 Install the Cable Management Arm (CMA) (Optional) ������������������������������������������������������������������� 8
7 Connect Power Cables ���������������������������������������������������������������������������������������������������������� 10
8 Connect SAS Cables �������������������������������������������������������������������������������������������������������������� 11
8�1 X-Series ����������������������������������������������������������������������������������������������������������������������� 11
8�2 R-Series ����������������������������������������������������������������������������������������������������������������������� 12
8�2�1 R20 ������������������������������������������������������������������������������������������������������������������������������������ 12
8�2�2 R40 ������������������������������������������������������������������������������������������������������������������������������������ 13
8�2�3 R50 ������������������������������������������������������������������������������������������������������������������������������������ 14
8�3 M-Series ���������������������������������������������������������������������������������������������������������������������� 15
8�3�1 M40 ����������������������������������������������������������������������������������������������������������������������������������� 15
8�3�2 M50 and M60 ����������������������������������������������������������������������������������������������������������������������� 16
9 Install Bezel (Optional) ��������������������������������������������������������������������������������������������������������� 17
10 Additional Resources ���������������������������������������������������������������������������������������������������������� 17
11 Contacting iXsystems ��������������������������������������������������������������������������������������������������������� 17
Copyright © #### iXsystems, Inc. All rights reserved. All trademarks are the property of their respective owners.

Page 1
1 Introduction
The ES60 is a 4U JBOD with 60 3�5” drive bays, redundant power supplies, and two TrueNAS controllers�
The ES60 requires a rack post depth range between 28�5” and 32” with the Cable Management Arm (CMA), or 36”
without the CMA�
Your system comes with the TrueNAS operating system preloaded�
Review the safety considerations and hardware requirements before installing the ES60 into a rack�
1.1 Safety
1.2 Requirements
1.1.1 Static Discharge
1.1.2 Handling the System
We recommend these tools when installing an R-Series system in a rack:
• #2 Philips head screwdriver
• Flat head screwdriver
• Tape measure
• Level
• 16 standard M5 cage nuts (typically provided with square-hole racks)
We recommend at least two people lift an ES60�
Static electricity can build up in your body and discharge when touching conductive materials� Electrostatic
Discharge (ESD) is harmful to sensitive electronic devices and components� Keep these safety recommendations in
mind before opening the system case or handling non-hot-swappable system components:
• Turn o the system and remove power cables before opening the case or touching internal components.
• Place the system on a clean, hard work surface like a wooden tabletop� Using an ESD dissipative mat can also
help protect the internal components�
• Touch the metal chassis with your bare hand to dissipate static electricity in your body before touching any
internal components, including components not yet installed in the system� Using an anti-static wristband and
grounding cable is another option�
• Store all system components in anti-static bags�
You can nd more preventative tips and details about ESD at https://www�wikihow�com/Ground-Yourself-to-Avoid-
Destroying-a-Computer-with-Electrostatic-Discharge�
Never attempt to lift an ES60 loaded with drives! Install the system in a rack before adding drives, and remove
drives before de-racking the system�
Hold the system from the sides or bottom whenever possible� Always be mindful of loose cabling or connectors,
and avoid pinching or bumping these elements whenever possible�
These instructions use “left” and “right” according to your perspective when facing the front of a system or rack�

Page 2
Accessory kit with 2 IEC C13 to NEMA 5-15P
power cords, 2 IEC C13 to C14 cords, and a set of
velcro cable ties�
ES60 Expansion Shelf
Set of rackmount rails. The rails have a specic
front end, identied by a label visible on the
left above� The front ends of the rails must be
installed facing the front of the rack�
Up to 60 drive trays with installed hard drives,
shipped separately�
Two 3-meter Mini SAS HD to Mini SAS HD cables�
2 ES60 Components
ES60 Bezel
TrueNAS units are carefully packed and shipped with trusted carriers to arrive in perfect condition�
If there is any shipping damage or missing parts, please take photos and contact iXsystems support immediately at
support@ixsystems�com, 1-855-GREP4-iX (1-855-473-7449), or 1-408-943-4100�
Please locate and record the hardware serial numbers on the back of each chassis for quick reference�
Carefully unpack the shipping boxes and locate these components:

Page 3
2.1 Front Indicators
Indicators on the front panel show power, fault, and locate ID� The fault indicator is on during the initial power-on
self-test (POST) or when the TrueNAS software has issued an alert�
1� Power indicator
2� Alarm indicator
3� Locate ID
4� Management port (not used)
5� HD Mini SAS3 connectors
Controller 1
Power Supply 1
Controller 2
Power Supply 2
Light Color and Indication
Green: System on
Amber: Fault
Blue: Locate ID active
ID
2.2 Rear Components and Ports

Page 4
3 Assemble the Rail Kit
3.1 Separate Cabinet Rails from Rack Rails
Each rack rail includes an inner cabinet rail that must be removed� Extend the cabinet rail as shown below until the
white release tab is exposed� Slide the white release tab to the right to release the cabinet rail� Remove the cabinet
rail from the rack rail� Repeat the process for the second rail�
The cabinet rails are mounted on each side of the system� Align the cabinet rail keyholes with the posts on the side
of the chassis� Slide the rail towards the rear of the system until the metal tab clicks and secures the rail in place�
Repeat this process on the other side�
3.2 Mount Cabinet Rails
The ES60 occupies 4U of rack space� The rails mount in the center 2U of that space�
The accessory kit includes cage nuts (for square and round-hole racks), which provide attachment points for rail
screws� Install a cage nut in the 4th hole from the top in the center 2U of rack space� Repeat for all four posts�
The rail ends have Front and Rear stamped on them� Place one rail in the rack with the Front stamp at the front fac-
ing outwards� The Rear stamp goes at the back of the rack� Align the pins on both rail ends with the rack mounting
holes� Make sure the cage nuts line up with the rail holes� Push the pins in to the rack holes until they lock in place�
Use the provided screws to secure the rails to the cage nuts�
3.3 Mount the Rack Rails
M4 Screws
Front Back
3U
2U
Cage Nut Placement
and Rail Alignment

Page 5
4 Rack the ES60
Lift the ES60 with attached cabinet rails and align the cabinet rails with the inside front of the rack rails�
Carefully slide the ES60 forwards into the rack rails until the unit stops (1)� Locate the blue tabs on the inside of the
cabinet rails� Slide the tabs towards the front of the ES60 and hold them in place (2)� Push the chassis into the rack
until the ears are flush with the front of the rack (3)� The thumbscrews on the ears are used to secure the unit in the
rack after drive trays have been installed (4)�
Caution: The ES60 requires two people to safely lift for racking and unracking�

Page 6
5 Install Drives
5.1 Remove Top Cover
Slide the unit out on the rails� Unscrew the cover screws to unlock the top cover (1)� Slide the top cover forwards,
then lift it o (2)�
5.2 Install Drive Trays
TrueNAS systems only support qualied HDs and SSDs. Contact the Sales Team for more drives or replacements.
Adding unqualied drives to the system voids the warranty. Call Support if drives are improperly installed in trays.
To add a new drive into an empty tray, place the tray on a flat surface (1) and push the hard drive into the tray (2)�
Make sure the connector is at the rear of the tray�

Page 7
A standard drive tray installation order simplies support and is strongly recommended: install SSD drives for SLOG
rst, if present. Follow this with SSD drives for L2ARC, if present, then hard drives or SSD drives for data storage.
Install the rst drive tray in the front left drive bay. Install the next drive tray to the right of the rst. Install remain-
ing drive trays to the right across the row. After a row is lled with drives, move back to the next row and start again
with the left bay� A label on the front left of the lid shows the preferred order of drives�
Slide the tray button left to open the latch� Carefully lower the drive tray into a drive bay until the latch begins to
move into place� Push the latch down until it locks into place�
Drive trays mount drives in the chassis� Each drive tray has LEDs that denote its current status�
Light Color / Behavior Status
Solid Blue Normal / Hot Spare
Blinking Blue Activity
Solid Amber Issue / Fault / Identify
Note for Samsung 1643a 2.5” SSDs: Drive tray LED’s only activate during drive activity or drive fault�
For proper air flow and cooling, you must install the entire rst row of drive trays. The top cover must also be in
place when the unit is on�

Page 8
6 Install the Cable Management Arm (CMA) (Optional)
There are two attachment posts on the left rear side of the ES60 for the CMA� Pulling the units lightly out of the rack
can make these posts more accessible� Align the holes on the CMA chassis bracket with the posts� Slide the cable
management arm forwards and pull the lever on the latch upwards to lock the bracket into place�
Locate the end of the flex housing with exposed pins. Un-clip and open the two tabs closest to the end, allowing the
flex housing to compress enough to t into the bracket holes. Press the flex housing rmly into the bracket until the
pins seat in the holes�
Note: You can only use the Cable Management Arm if your rackmount rail depth is between 28�5” and 32”�
The ES60 does not need the CMA to operate, but the CMA can help organize the ES60 power and data cables�
The tabs along the side of the flex housing can be unclipped from the top, the bottom, or removed entirely.
Autres manuels pour ES60
3
Table des matières
Autres manuels TrueNAS Matériel réseau
Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor
Yudor YDS-16 Manuel utilisateur

D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung
Samsung ES1642dc Instructions d'utilisation

Honeywell Home
Honeywell Home LTEM-PV Instructions de montage













