7
8. PARKSHIELD FUNCTION ADVANCED PARKING MODE
› The ParkShield function is designed to protect your parked vehicle.
› To use ParkShield, the camera must be continuously powered.
› To take advantage of all advanced ParkShield features, connect the dashcam with the optional
TrueCam Hardwire kit accessory.
ParkShield = how the function is activated
› Manual – must be turned ON/OFF with each parking by pressing .
› G-sensor – turns on automatically after 5 minutes of standing still based on the G-sensor. When
started, the camera switches to standard recording mode.
› Hardwire kit – turns on automatically when the ignition is ON/OFF. Requires connection with the
optional TrueCam Hardwire Kit.
ParkShield mode = how the function records and triggers recording
› Timelapse – the camera is constantly recording timelapse video.
› Motion detection – starts recording 20s of video when motion is detected in front of the lens.
› Impact recording – starts recording 20s of video when a crash is detected.
› Motion + Impact – starts recording 20s of video when motion is detected in front of the lens or
when an impact is detected.
ParkShield time = how long the function is on
› With the standard adapter, you can set a maximum of 12 hours.
› After connecting the camera to the optional TrueCam Hardwire Kit, additional options will become
available (to prevent the car battery from discharging).
Advanced ParkShield features and benefits when connecting the camera to the TrueCam Hard-
wire kit (professional installation recommended)
› Depending on how the TrueCam Hardwire kit is connected to the vehicle's fuses, you can:
- Automatically switch the camera from ParkShield mode to driving mode when the engine is
turned on and vice versa.
- Operate the camera non-stop in driving mode.
› Permanently power the camera (with hidden wiring) from the vehicle battery even when the engine
is off.
› Free up your car cigarette lighter or USB port.
› Vehicle battery protection: turns off the dashcam if the car battery voltage drops below the selec-
ted value, protecting it from discharging.
9. WIFI APPLICATION
A
Scan the QR code or go to the URL truecam.com/downloads
BInstall the app on your smart device.
C
Turn on the WiFi in the camera by holding the WiFi button (3s).
D
On your smart device, connect to the WiFi network with the camera name, enter the password (de-
fault 12345678), launch the app and connect to the camera.
