Tru-Test S1 Manuel utilisateur

S1 Indicator Quickstart Guide

This quickstart guide provides basic instructions for setting up and using the

S1 indicator. For further information, visit www.tru-test.com.

Contents

Unpacking the box .........................................................1

Installing the indicator....................................................2

Changing indicator settings ............................................4

Maintenance and care....................................................5

Warranty and servicing...................................................5

Compliance....................................................................6

1Unpacking the box

Check that you have all of these items. If anything is missing, contact your

supplier.

QUICKSTART GUIDE

S1 Indicator Quickstart Guide

2Installing the indicator

Before you start:

Fully charge the indicator overnight.

Step 1:

Mount the indicator bracket onto an

appropriate suppor

t that the indicator

connector on the load bar or cell cable

will reach. Slide the indicator onto the

bracket.

S1 Indicator Quickstart Guide

Step 2:

Plug the indicator connector into

the indicator and tighten up.

Step 3:

Press to power on the indicator.

S1 Indicator Quickstart Guide

3Changing indicator settings

Data Link enables you to change settings on the indicator, such as displaying

metric or imperial measurements.

1. Ensure that your PC has internet connectivity and download the Data Link

PC Software from livestock.tru-test.com/applications/datalink.

2. Plug one end of the USB cable into the indicator and the other end into

your PC.

3. Launch Data Link on your PC; click , and Settings.

S1 Indicator Quickstart Guide

4Maintenance and care

•Do not leave the indicator or indicator connector immersed in water.

•When not in use, always replace the dust cap on the indicator connector.

•Remove dust and moisture from the plugs and dust cap using methylated

spirits, ethyl alcohol, or a suitable electrical contact cleaner. Stronger

spirits must not be used, as they may react with the plastic.

5 Warranty and servicing

For service and warranty information, see www.tru-test.com.

S1 Indicator Quickstart Guide

6 Compliance

FCC notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

All trademarks with an * are not owned by Tru-Test Limited and belong to

their respective owners.

Guia Rápido do Indicador S1

GUIA DE INÍCIO RÁPIDO DO

Este guia rápido fornece as instruções básicas para a instalação e o uso do seu

Indicador S1. Para mais informações, visite a www.tru-test.com.

Conteúdo

Desembalar a caixa................................................ 7

Instalação do indicador.......................................... 8

Modificar as configurações do indicador............... 10

Manutenção e cuidados ....................................... 11

Garantia e assistência .......................................... 11

1Desembalar a caixa

Verifique que haja todos os seguintes itens. Se algo estiver faltando, contate o

seu fornecedor.

Guia Rápido do Indicador S1

2Instalação do indicador

Antes de começar:

Carregue o indicador

completamente durante a noite.

Passo 1:

Monte o grampo do indicador em um

suporte apropriado no alcance do

conector do indicador ou do cabo da

barra de carga ou da célula. Fixe o

indicador no grampo.

Guia Rápido do Indicador S1

Passo 2:

Insira o conector do indicador no

indicador e fixe-o.

Passo 3:

Pressione para ligar o

indicador.

Guia Rápido do Indicador S1

3Modificar as configurações do

indicador

O Data Link permite modificar as configurações do indicador como, p. ex., a

exposição de medições métricas ou imperiais.

1. Assegure-se de que o seu PC esteja conectado à Internet e baixe o

software Data Link PC de livestock.tru-test.com/applications/datalink

2. Insira uma extremidade do cabo USB no indicador e a outra no seu PC.

3. Inicialize o Data Link no seu PC; clique em , e Configurações.

Autres manuels pour S1

Table des matières

Langues :

Autres manuels Tru-Test Instrument de mesure

Tru-Test

Tru-Test S3 Manuel utilisateur

Tru-Test

Tru-Test Speedrite Fault Finder Manuel utilisateur

Tru-Test

Tru-Test XHD2 Manuel utilisateur

Tru-Test

Tru-Test EC-20 Manuel utilisateur

Tru-Test

Tru-Test EC-09 Manuel utilisateur

Tru-Test

Tru-Test XR3000 Manuel utilisateur

Tru-Test

Tru-Test 703 Manuel utilisateur

Tru-Test

Tru-Test EC-10 Manuel utilisateur

Tru-Test

Tru-Test EziWeigh6 Manuel utilisateur

Tru-Test

Tru-Test SRS2 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur