Troxler RoadReader 3430 Manuel utilisateur
Manual of Operation and Instruction
Troxler PlusLoader
For Loading Calibration
Constants into Troxler
Model 3430, 3440, and
3451 Gauges
Troxler Electronic Laboratories, Inc.
3008 Cornwallis Rd. •P.O. Box 12057
Research Triangle Park, NC 27709
Phone: 1.877.TROXLER
Outside the USA: +1.919.549.8661
Fax: +1.919.549.0761
www.troxlerlabs.com
ii
Troxler products are protected by U.S. and foreign Patents
Copyright 2015
Troxler Electronic Laboratories, Inc.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval
systems, for any purpose without the express written
permission of Troxler Electronic Laboratories, Inc.
PN 110190
December 2015
Edition 2.0
Model 4590 iii
TROXLER SERVICE CENTERS
Troxler Corporate Headquarters
P.O. Box 12057
Research Triangle Park, NC 27709
Phone: 1.877.TROXLER (1.877.876.9537)
Outside the U.S.A.: +1.919.549.8661
Fax: +1.919.549.0761
Technical Support
Phone: 1.877.TROXLER
(1.877.876.9537)
TroxTechSupport@troxlerlabs.com
North Carolina Service Center
3008 E. Cornwallis Road
Research Triangle Park, NC 27709
Phone: +1.919.549.8661
Fax: +1.919.549.0761
TroxTechSupport@troxlerlabs.com
Florida Office & Service Center
2376 Forsyth Road
Orlando, FL 32807
Phone: +1.407.681.4221
Fax: +1.407.681.3188
TroxTechSupport@troxlerlabs.com
Midwestern Office & Service Center
1430 Brook Drive
Downers Grove, IL 60515
Phone: +1.630.261.9304
Fax: +1.630.261.9341
TroxTechSupport@troxlerlabs.com
Western Office & Service Center
11300 Sanders Drive, Suite 7
Rancho Cordova, CA 95742
Phone: +1.916.631.0234
Fax: +1.916.631.0541
TroxTechSupport@troxlerlabs.com
Southwestern Office &
Service Center
2016 East Randol Mill Rd., Suite 406
Arlington, TX 76011
Phone: +1.817.275.0571
Fax: +1.817.275.8562
TroxTechSupport@troxlerlabs.com
Troxler Europe & Service Center
Troxler Electronics GmbH
Gilchinger Strasse 33 D.82239
Alling nr. Munich, Germany
Phone: ++ 49.8141.71063
Fax: ++49.8141.80731
troxler@t-online.de
Troxler Electronic Technologies
(Zhangjiagang)
1F, Bldg G, No. 1 Guotai North Road
ZJG, China, 215600
Phone: 0086.512.56793702
Fax: 0086.512.56793701
kjin@troxlerlabs.cn
To locate an independent, Troxler-authorized service partner
near you, call 1.877.TROXLER (1.877.876.9537).
iv
TABLE OF CONTENTS
CHAPTER 1: WHEN WOULD I NEED PLUSLOADER ...........................7
Introduction ...................................................................................................8
CHAPTER 2: INSTALLING AND ACTIVATING THE SOFTWARE.........11
Installing the PlusLoader ..........................................................................12
Activating the PlusLoader........................................................................13
CHAPTER 3: PREPARING THE GAUGE TO ENTER CONSTANTS ......15
Connect Gauge to the Computer .........................................................16
CHAPTER 4: LOADING AND READING THE CALIBRATION .............17
Loading the Calibration Constants into the Gauge..........................18
Reading the Calibration Constants from the Gauge........................27
CHAPTER 5: CHECKING THE LICENSE STATUS ................................30
APPENDIX A: PLACING THE GAUGES IN CLI MODE..........................31
Putting Models 3430 Plus, 3440 Plus, and 3440 Enhanced in CLI
Mode .............................................................................................................32
Putting the Troxler Model 3430 Enhanced in CLI Mode ................33
APPENDIX B: UPLOADING CALIBRATION CONSTANTS TO PDA......34
Uploading Calibration Constants (Model 3451 Only)......................35
Model 4590 v
LIST OF FIGURES
Figure 1: 3440 Plus Gauge ........................................................................9
Figure 2: 3440 "Legacy" Gauge............................................................. 10
Figure 3: Opening Window, PlusLoader............................................. 12
Figure 4: Activation Screen..................................................................... 13
Figure 5: PlusLoder Main Menu............................................................ 18
Figure 6: Communications Port Selection Screen............................ 19
Figure 7: Gauge Model Selection Screen........................................... 19
Figure 8: Query Regarding Whether to Read Calibration
Constants from Gauge ............................................................................ 20
Figure 9: Data Entry Screen for Model 3430 or 3440, Plus or
Enhanced..................................................................................................... 21
Figure 10: Opening Data Screen for Model 3451. ......................... 22
Figure 11: Second Data Entry Screen (Thin Layer Data) for Model
3451. ............................................................................................................. 23
Figure 12: Communications Protocol Initialization Prompt. ........ 24
Figure 13: Security Check Confirmation ............................................. 24
Figure 14: Calibration Storage Complete Message......................... 25
Figure 15: Calibration Data Passed to Gauge Message................. 25
Figure 16: License Status Display Screen............................................ 26
Figure 17: Calibration Constants Complete Message..................... 28
Figure 18: Example Downloaded Constants Screen ....................... 29
Figure 19: Socket™ Bluetooth™ Cordless Serial Adapter.............. 36
vi
Figure 20: Socket
Bluetooth
cordless serial adapter
installed in the gauge............................................................................... 36
Figure 21: Intermec® 700 Color mobile computer ....................... 37
Figure 22: Pocket PC Opening Screen .............................................. 38
Figure 23: Pocket PC Initialization Screen.......................................... 38
Figure 24: Pocket PC Gauge Status Screen...................................... 39
Figure 25: Gauge Warmup Screen ..................................................... 39
Figure 26: RoadReader Plus Main Menu for Pocket PC. .............. 40
Figure 27: Pocket PC Gauge Tools Menu ......................................... 40
Figure 28: Pocket PC Diagnostic Menu ............................................. 41
Figure 29: Pocket PC Diagnostic Menu with Dropdown Menu ... 41
Figure 30: Service Code Input Box...................................................... 42
Figure 31: Pocket PC Service Menu.................................................... 42
Figure 32: Pocket PC Calibration Constants Menu ........................ 43
Figure 33: Pocket PC Calibration Constants Collection Screen.... 44
Figure 34: Calibration data transfer from the gauge to the Pocket
PC was successful...................................................................................... 44
Model 4590 7
Chapter 1:
When Would I Need
PlusLoader
This chapter covers the purpose of the PlusLoader
and when it is needed.
8
Introduction
For added security and data confidentiality and control, the
following gauges do not allow the user to enter calibration
constants manually into the gauge through the keypad:
•Model 3430 Plus
•Model 3440 Plus
•Enhanced Model 3430
•Enhanced Model 3440
•Model 3451
There are only two ways to load calibration constants into these
gauges: either the full Troxler calibration software program
specific to these gauges, or the PlusLoader program.
A distinct visual characteristic with which one can easily
distinguish between the Plus or Enhanced models of the 3430
and 3440 (which do require the PlusLoader) and the “Legacy”
versions of the 3430 and 3440 (which do not require the
PlusLoader and allow the user to enter calibration constants
manually into the gauge through the keypad) is the source rod
tower. Specifically, the Plus and Enhanced models of the 3430
and 3440 have a triangular shaped source rod tower as shown
here:
Model 4590 9
Figure 1: 3440 Plus Gauge
Note the triangular source rod tower. The 3430 Plus, the 3430
Enhanced, and the 3440 Enhanced also have this same tower
design.
By contrast, the “Legacy” versions of the Troxler Model 3430
and 3440 do not have a triangular shaped source rod tower, but
rather a cylindrical, notched index rod parallel to and adjacent
to the cylindrical source rod, neither of which is enclosed in a
tower assembly:
10
Figure 2: 3440 "Legacy" Gauge
Note the cylindrical source rod (the leftmost rod) and the
adjacent, likewise cylindrical index rod.
Autres manuels pour RoadReader 3430
3
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Troxler Instrument de mesure
Troxler
Troxler EGauge Combo 4540 Manuel utilisateur
Troxler
Troxler RoadReader 3430 Manuel utilisateur
Troxler
Troxler TroxAlert Manuel utilisateur
Troxler
Troxler 3440-L Manuel utilisateur
Troxler
Troxler 3430 Plus Manuel utilisateur
Troxler
Troxler 3241 Series Manuel utilisateur
Troxler
Troxler EGauge Combo 4540 Manuel utilisateur
Troxler
Troxler Enhanced RoadReader Plus 3451 Manuel utilisateur
Troxler
Troxler PaveTracker Plus Manuel utilisateur
Troxler
Troxler RoadReader 3430 Mode d’emploi
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur