Tripp Lite U339-002 Manuel utilisateur

Owner’s Manual

USB 3.0 to Dual SATA

Dock/Cloning Station

Model: U339-002

Español 9 • Français 17

1111 W. 35th Street, Chicago, IL 60609 USA

tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Package Contents

Product Features

• U339-002

• 2.5 ft. USB 3.0 Device Cable

• External Power Supply (Input: 100-240V,

50/60 Hz, 1.5A; Output: 12V 3A)

• Owner’s Manual

• Dual SATA docking station allows the

connection of two 2.5” or 3.5” SATA I, II,

or III hard drives via the USB port on your

computer

• Quickly access your hard drive content

without the need for time consuming internal

installation

• Ofﬂine cloning functionality lets you duplicate

one hard drive onto another with the touch

of a button; no need to connect it to a host

computer

• Cloning status is displayed via Progress LEDs

• Supports USB 3.0 data transfer rates up to

5 Gbps

System Requirements

Product Features

• (x2) 2.5” or 3.5” SATA Hard Drive.

• Computer with an available USB port. A USB

3.0 port is required to achieve maximum

speeds up to 5 Gbps.

Note: Cloning functionality will not work if the

U339-002 is connected to a computer or any other

source via USB cable.

•

Supports UASP (Serial Attached SCSI

Protocol)

for even faster speeds than USB

3.0*

• Backward compatible with High Speed USB

2.0 and Full Speed USB 1.1

• Accepts 2.5” and 3.5” hard drives up to

6TB**

* Requires UASP-enabled host controller. UASP is

supported by Windows®8 and later, Mac®OSX

10.8 and later, and Linux®

**Will work with larger hard drives as they become

available

Docking Station Installation

Note: If your SATA hard drive has not been formatted

yet, you will need to format it using your computer’s

Disk Management utility in order to access it.

1. Connect the included power supply to

the unit and plug it into a Tripp Lite Surge

Protector, Power Distribution Unit (PDU), or

Uninterruptible Power Supply (UPS).

2. Insert your 2.5” or 3.5” SATA Hard Drive

into an available bay on the docking station,

making sure it is securely seated on the

SATA connector. Repeat this step to connect

an additional hard drive.

3. Connect the included USB 3.0 cable

between your computer and the docking

station.

4. Turn on power to the docking station using

the ON/OFF button on the back of the unit.

The red Power LED will illuminate to indicate

power is being received. The red Drive LEDs

will illuminate to indicate a hard drive is

connected to the corresponding port and

recognized by the computer.

Ofﬂine Cloning

Notes:

•If your SATA hard drive has not been formatted yet,

you will need to format it using your computer’s Disk

Management utility before proceeding with cloning.

•The replica drive’s (Bay B) capacity must be larger

than the master drive (Bay A). If its capacity is

smaller or equal to the master drive, you will not be

able to clone information onto it.

•Prior to cloning, ensure there is no important data

stored on the replica drive. Once cloning begins,

all data on the replica drive will be deleted and

replaced with the cloned data from the master drive.

•Be aware that the cloning process will take some

time (approximately 2.5 hours per 1TB). Do not

turn off power or remove hard drive before the LED

progress bars indicate the process is completed.

•Ofﬂine cloning feature will not work if the U339-002

is connected to a computer or any other source via

USB cable

1. Connect the included power supply to

the unit and plug it into a Tripp Lite Surge

Protector, PDU, or UPS.

2. Insert the 2.5” or 3.5” SATA master hard

drive (the drive you want to clone) into the

master drive (Bay A) of the docking station.

Ofﬂine Cloning

3. Insert the 2.5” or 3.5” SATA replica hard

drive (the drive the cloned data will be

copied to) into the replica drive (Bay B) of

the docking station.

4. Turn on power to the docking station using

the ON/OFF button on the back of the unit.

The red Power LED will illuminate to indicate

power is being received. The red Drive LEDs

will illuminate to indicate a hard drive is

connected to the corresponding port, and

ready for cloning.

5. Press the Clone button twice, pausing for

several seconds after the ﬁrst press, and

then release.

6. The 25% Progress LED will blink when the

cloning begins. The Progress LEDs will

illuminate blue to indicate the percentage of

cloning completed as the process continues.

7. When all the blue Progress LEDs are

illuminated solid blue, the cloning process is

complete.

Warranty and Product Registration

3-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and

workmanship for a period of three (3) years from the date of initial purchase.

TRIPP LITE’s obligation under this warranty is limited to repairing or replacing

(at its sole option) any such defective products. To obtain service under

this warranty, you must obtain a Returned Material Authorization (RMA)

number from TRIPP LITE or an authorized TRIPP LITE service center. Products

must be returned to TRIPP LITE or an authorized TRIPP LITE service center

with transportation charges prepaid and must be accompanied by a brief

description of the problem encountered and proof of date and place of

purchase. This warranty does not apply to equipment, which has been

damaged by accident, negligence or misapplication or has been altered or

modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties;

therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the

purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for

any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of

equipment, loss of software, loss of data, costs of substitutes, claims by third

parties, or otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll

be automatically entered into a drawing for a chance to win a FREE Tripp Lite

product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See

website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

1111 W. 35th Street, Chicago, IL 60609 USA

tripplite.com/support

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by

Tripp Lite could void the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE)

Directive and implementing regulations, when customers buy

new electrical and electronic equipment from Tripp Lite they are

entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like

basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately

becomes waste

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject

to change without notice.

Warranty and Product Registration

19-10-007 93-3613_RevC

Manual del Propietario

Estación de Conexión /

Clonación

USB 3.0 a SATA Doble

Modelo: U339-002

English 1 • Français 17

1111 W. 35th Street, Chicago, IL 60609 EE UU

tripplite.com/support

MÁS DE

AÑOS

Contenido del Empaque

Características del Producto

• U339-002

• Cable para Dispositivos USB 3.0 de 76 cm

[2.5 pies]

• Fuente de Alimentación Externa (Entrada:

100-240V, 50/60 Hz, 1.5A; Salida: 12V 3A)

• Manual del Propietario

• La estación de conexión SATA doble permite

la conexión de dos discos duros de 2.5” o

3.5” SATA I, II o III mediante el puerto USB

de su computadora.

• Acceda rápidamente al contenido de su disco

duro sin necesidad de una instalación interna

consumidora de tiempo

• La funcionalidad de la clonación fuera de

línea le permite duplicar un disco duro en

otro con un toque de botón; sin necesidad de

conectarlo en una computadora anﬁtrión

• El estado de la clonación se muestra

mediante LEDs de progreso

• Admite tasas de transferencia de datos de

USB 3.0 de hasta 5 Gbps

Autres manuels pour U339-002

Table des matières

Langues :

Autres manuels Tripp Lite Station d'accueil

Tripp Lite

Tripp Lite U442-DOCK40-5 Manuel utilisateur

Tripp Lite

Tripp Lite U339-002 Manuel utilisateur

Tripp Lite

Tripp Lite U339-002 Manuel utilisateur

Tripp Lite

Tripp Lite U439-001 Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK11-S Manuel utilisateur

Tripp Lite

Tripp Lite B003-HC2-DOCK1 Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK1 Manuel utilisateur

Tripp Lite

Tripp Lite U439-001 Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK8-GG Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK3-B Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK20BINT Manuel utilisateur

Tripp Lite

Tripp Lite U439-002-CG2 Manuel utilisateur

Tripp Lite

Tripp Lite Safe-IT U442AB-DOCK9 Manuel utilisateur

Tripp Lite

Tripp Lite MTB3-DOCK-04 Manuel utilisateur

Tripp Lite

Tripp Lite MTB3-DOCK-03 Manuel utilisateur

Tripp Lite

Tripp Lite U339-E02 Manuel utilisateur

Tripp Lite

Tripp Lite MTB3-DOCK-01 Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK8-BINT Manuel utilisateur

Tripp Lite

Tripp Lite USB-C U442-DOCK7D-B Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK17-GY Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK2-S Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK4-S Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK4-INT Manuel utilisateur

Tripp Lite

Tripp Lite U442-DOCK11-S Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur