TRINITY Pro TBFZ-0921 Manuel utilisateur

OWNER’S MANUAL

TRINITY PRO 5-TIER NSF 36” x 18” x 72”

WIRE SHELVING RACK w/WHEELS

Model # TBFZ-0921 / TBFPBA-0921

Important / Important / Importante

DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA

Directives intelligentes

Instrucciones Inteligentes

FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS

POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES

PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

Your TRINITY PRO 5-Tier NSF Wire Shelving Rack w/Wheels should include the following parts. Please

inspect box contents to ensure you have received all components.

If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY

Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online

via “Contact Us” section at www.trinityii.com.

You will NOT need additional tools for assembly.

PARTS LIST

SHELF (5)

D E F

CASTER (w/wrench)

(2 locking, 2 non-locking)

For mobile option

SLIP SLEEVE

(40) + (2) extra FEET LEVELER (4)

For stationary option

TOP POLE (4)

End Cap (4) and

Pole Connector (4)

pre-installed

BOTTOM POLE (4)

Threaded Insert (4)

pre-installed

Note: The black circular plastic spacers in between Shelves are used only for packaging

purposes. They are NOT needed. Please discard.

ASSEMBLY INSTRUCTIONS

A (4) D (8)

Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.

STEP 1

STEP 2

A (4) E (4) F (4)

Stationary Option

Screw each FEET LEVELER (F) into bottom of each

BOTTOM POLE (A). Turn clockwise to screw in place.

Mobile Option

Screw each CASTER (E) into bottom of each BOTTOM

POLE (A). Turn clockwise to screw in place. Make sure

locking casters are on the same side.

Use provided caster wrench to tighten completely.

Failure to do as instructed could result in caster stem

breaking.

For easiest assembly, do not attach TOP POLES (B) and

BOTTOM POLES (A) until instructed. Once connected,

these will be posts for the rack.

Note that POLES (A+B) have slight horizontal line

indentations at 1” intervals. Each SLIP SLEEVE (D) has

raised horizontal lines inside designed to lock them in

place on POLES (A+B).

On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D)

at desired height no higher than 3rd indentation from

bottom. Please make sure arrow faces up and word “TOP”

is right side up.

Slide pair of SLIP SLEEVES (D) until you hear a click to

confirm the pair is locked onto BOTTOM POLE (A). Do this

for each BOTTOM POLE (A) and make sure height is

identical for each BOTTOM POLE (A). Do NOT place more

than one pair on each pole at a time.

ASSEMBLY INSTRUCTIONS

C (1)

D (8) C (1)

STEP 3

STEP 4

Place SHELF (C) on its side and slide each BOTTOM POLE (A)

through each corner cylinder on SHELF (C). Make sure SHELF (C)

corner cylinders are positioned over SLIP SLEEVES (D).

Stand the unit upright.

Note:

•Level side of SHELF (C) is TOP side (TRINITY logo on corner

cylinders should be right-side up.)

•Use a rubber mallet, if needed, to secure SHELF (C).

•For convenience, place BOTTOM POLES (A) with Locking

Casters on long side of shelf if rack will be pushed against a

wall, OR, if rack is frequently rolled around like a cart, place

BOTTOM POLES (A) with Locking Casters on the side being

pushed or pulled.

On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D) at

desired height between SHELVES (C). Make sure arrow faces

up and word “TOP” is right side up. Do this for each BOTTOM

POLE (A), and make sure height is identical for each BOTTOM

POLE (A).

Lower SHELF (C) over each BOTTOM POLE (A) so corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Note:

•Shelves are adjustable in 1” increments and can be placed

as needed to best fit storage needs.

•Use a rubber mallet, if needed, to secure SHELF (C).

ASSEMBLY INSTRUCTIONS

B (4)

D (24) C (3)

STEP 5

STEP 6

Screw TOP POLE (B) into BOTTOM POLE (A).

Repeat for each remaining TOP POLE (B).

Note: Top of each TOP POLE (B) is indicated

by a BLACK END CAP.

Repeat Step 4 to install other SHELVES (C) as desired.

Note:

•Shelves are adjustable in 1” increments and can be placed

as needed to best fit storage needs.

•Use a rubber mallet, if needed, to secure SHELVES (C).

•For stationary option, after assembly, adjust FEET

LEVELERS (F) as needed to ensure shelving rack is level.

SERVICE PARTS LIST –TBFZ-0921 Chrome Color

Part Number Description Part Number Description

1) XBK-01-011-2543 Slip Sleeve 6) XXX-97-002-0001 Wrench

2) ZSV-04-006-3600 Top Pole 7) XBK-98-010-2535 Feet Leveler

3) ZSV-01-013-2523 Pole Connector 8) ZSV-99-023-4010 Non-locking Caster

4) ZSV-04-043-3600 Bottom Pole 9) XBK-23-004-2517 End Cap

5) ZSV-99-024-4010 Locking Caster 10) ZSV-03-031-

3618

Shelf

TRINITY Customer Service provides the following replacement parts:

SERVICE PARTS LIST –TBFPBA-0921 Black Anthracite Color

Part Number Description Part Number Description

1) XBK-01-012-2543 Slip Sleeve 6) XXX-97-002-0001 Wrench

2) PBA-04-006-3600 Top Pole 7) XBK-98-010-2535 Feet Leveler

3) ZSV-01-013-2523 Pole Connector 8) ZSV-99-023-4010 Non-locking Caster

4) PBA-04-043-3600 Bottom Pole 9) XBK-23-004-2517 End Cap

5) ZSV-99-024-4010 Locking Caster 10) PBA-03-031-

3618

Shelf

TRINITY Customer Service provides the following replacement parts:

WARNINGS

1. Read and understand all instructions. Failure to follow all instructions may result in injury

and/or damage.

2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed

could result in the caster stem breaking thereby causing the shelving rack to collapse.

3. The warnings, cautions, and instructions discussed in this manual cannot cover all

possible conditions or situations that may occur. The user must always be aware of the

environment where the product will be placed and make sure to use the product in a safe

and responsible manner.

4. Do NOT modify the product in any way. Unauthorized modification may impair the

function and/or safety of the product, and may affect the life of the product. Any

modifications will void product warranty.

5. Check for damaged parts.Before using this product, carefully check that all parts are in

good condition, and that the product will operate properly and perform its intended

function. Check for damaged parts and any other conditions that may affect the operation

of this product. Replace damaged or worn parts, and never use this product with a damaged

part.

6. Do NOT overload the product.

7. Do NOT allow children to climb or play around the product. Tipping may occur causing

injury.

8. Only use the product on an even and stable surface.

9. Load the product evenly and place the heaviest items on the lower shelves.

Weight capacity per Shelf on Feet Levelers 800 lb (evenly distributed)

Weight capacity per Shelf on Casters 200 lb (evenly distributed)

Total weight capacity of Shelving Rack

(evenly distributed)

4000 lb (on Feet Levelers)

1000 lb (on Casters)

CARE AND MAINTENANCE

•Wipe with a dry cloth as needed to remove dust and dirt.

•Avoid harsh, abrasive cleaners, and other corrosive chemicals.

•The chrome color version (TBFZ-0921) is not recommended for outdoor use.

Thank you for purchasing a TRINITY PRO 5-Tier NSF Wire Shelving Rack w/Wheels. In order to register

your product and receive streamlined customer service, please fill out the following Product

Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form

online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a

copy of your original receipt with your submission.

First Name: Last Name:

Address:

City: State: Zip Code:

Email Address: Phone:

Product Model #: TBFZ-0921/TBFPBA-0921 Purchase Date: / /

Location of Purchase:

Please rate the importance of each feature (1=least important; 10=most important)

Quality Price Size/Capacity Appearance Other

How did you hear about our product?

Magazine Ad Catalog Salesperson Word of Mouth

Internet Store Display Other

Marital Status: Single Married

Household Income: Below $50,000 $50,000-$150,000 $150,000+

Education: High School College Graduate School

Primary Residence: Own Rent

Comments/Suggestions:

PRODUCT REGISTRATION

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TRINITY Pro Support et étagère

TRINITY Pro

TRINITY Pro TBFZ-0920 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFPBA-0921 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBTZ-0948 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBTZ-0949 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0906 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0925 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0926 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0922 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0923 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFC-0928 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFPBR-2100 Manuel utilisateur

TRINITY Pro

TRINITY Pro TBFZ-0927 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur