Trinity Basics EcoStorage TBFZ-0955 Manuel utilisateur

OWNER’S MANUAL

TRINITY BASICS 5-TIER NSF 24"x12"x55.5"

PANTRY RACK

Model # TBFZ-0955 / TBFPBR-0955

Important / Important / Importante

DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA

Directives intelligentes

Instrucciones Inteligentes

FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS

POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES

PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

Your TRINITY Basics 5-Tier Pantry Rack should include the following parts. Please inspect box contents to

ensure you have received all components.

If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY

Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online

via “Contact Us” section at www.trinityii.com.

You will NOT need additional tools for assembly.

PARTS LIST

DIVIDER (4)

A B

SHELF (5)

TOP POLE (4)

End Cap (4) and

Pole Connector (4)

pre-installed

BOTTOM POLE (4)

Threaded Insert (4)

pre-installed

D F

Note: The black circular plastic spacers in between Shelves are used only for packaging

purposes. They are NOT needed. Please discard.

ANTI-TIP

HARDWARE PACK

(1)

H I J K

LOCKING

CASTER (2) WRENCH (1)NON-LOCKING

CASTER (2)

MIDDLE POLE (4)

Pole Connector (4)

pre-installed

PUSH HANDLE (1) SLIP SLEEVE

(44) + (4) extra

ASSEMBLY INSTRUCTIONS

A (4) I (2) J (1)

STEP 1

Screw each CASTER (H) and (I) into each BOTTOM POLE

(A). Turn clockwise to screw in place. Make sure locking

casters are on same side.

Use provided caster wrench to tighten completely.

Failure to do as instructed could result in caster stem

breaking.

For easiest assembly, do NOT attach TOP POLES (C), MIDDLE

POLES (B) and BOTTOM POLES (A) until instructed. Once

connected, these will be posts for the rack.

Note that POLES (A+B+C) have slight horizontal line indentations

at 1” intervals. Each SLIP SLEEVE (G) has raised horizontal lines

inside designed to lock them in place on POLES (A+B+C).

On BOTTOM POLE (A), place one pair of SLIP SLEEVES (G) at

desired height no higher than 3rd indentation from bottom.

Please make sure arrow faces up and word “TOP” is right side up.

Slide pair of SLIP SLEEVES (G) until you hear a click to confirm pair

is locked onto BOTTOM POLE (A). Do this for each BOTTOM POLE

(A) and make sure height is identical for each BOTTOM POLE (A).

Do NOT place more than one pair on each pole at a time.

A (4) G (8)

Note: There will be a very small gap in-between two locked SLIP SLEEVES (G)—this is normal.

STEP 2

H (2)

H & I

ASSEMBLY INSTRUCTIONS

Place SHELF (D) on its side and slide each BOTTOM POLE (A)

through each corner cylinder on SHELF (D). Make sure

SHELF (D) corner cylinders are positioned over SLIP SLEEVES

(G).

Stand unit upright.

Note:

•Use a rubber mallet, if needed, to secure SHELF (D).

•For convenience, place BOTTOM POLES (A) with Locking

Casters on shorter side of shelf.

D (1)

C (4)

STEP 3

STEP 4

B (4)

Screw MIDDLE POLE (B) into BOTTOM POLE

(A). Repeat for each remaining MIDDLE

POLE (B).

Screw TOP POLE (C) into MIDDLE POLE (B).

Repeat for each remaining TOP POLE (C).

Note: Top of each TOP POLE (C) is indicated

by a BLACK END CAP.

ASSEMBLY INSTRUCTIONS

In the same way as indicated in STEP 2 & 3,

install 2 SHELVES (D) and then PUSH

HANDLE (E).

Then install another 2 SHELVES (D) above

PUSH HANDLE (E).

Clip one end of DIVIDER (F) onto straight wire of

SHELF (D) frame as shown, then squeeze other end

of DIVIDER (F) to clip onto other side of SHELF (D)

frame.

Install other DIVIDERS (F) on SHELVES (D) as desired.

STEP 5

STEP 6

D (4)G (36) E (1)

F (4)

Note:

•PUSH HANDLE (E) height needs to be pre-

determined and assembled in right order.

•Shelves are adjustable in 1” increments

and can be placed as needed to best fit

storage needs.

•Use a rubber mallet, if needed, to secure

SHELVES (D) and PUSH HANDLE (E).

ASSEMBLY INSTRUCTIONS

Anti-tip Hardware Installation

K (1)

On Wood Stud

Determine wood stud location and mark it on wall, level with topmost shelf. Do this on two different

studs along top shelf.

Place Shelving Rack into position.

Insert Screw through Washer and backside frame of top shelf as shown. Fasten Screw tightly into stud.

Do this for each stud that was marked out.

On Brick/Concrete

Mark out two separate locations on wall, level with topmost shelf.

With a 1/4” drill bit, drill a hole 1-1/4” deep at each marked location. Push Anchors flush into each hole.

Place Shelving Rack into position.

Insert Screw through Washer and backside frame of top shelf as shown. Fasten Screw tightly into

Anchor. Do this on both Anchors that were placed in wall.

Washer (2) Anchor (2) Screw (2)

ANTI-TIP HARDWARE PACK (K) is used to protect against accidental

tipping –especially due to curious children. Note that installing

ANTI-TIP HARDWARE PACK (K) will no longer allow your rack to be

mobile.

Part Number Description Part Number Description

1) ZSV-03-079-2412 Shelf 8) XXX-97-002-0005 Wrench

2) ZSV-04-047-1650 Top Pole 9) ZSV-02-012-0003 Divider

3) ZSV-01-029-1922 Pole Connector 10) XBK-01-011-1936 Slip Sleeve

4) ZSV-04-048-1800 Middle Pole 11) ZSV-05-028-1200 Handle

5) ZSV-04-049-1825 Bottom Pole 12) ZSV-02-011-0001 Anti-tip Hardware Pack

6) ZSV-99-007-2008 Non-locking Caster 13) XBK-23-004-1911 End Cap

7) ZSV-99-008-2008 Locking Caster

TRINITY Customer Service provides the following replacement parts:

SERVICE PARTS LIST –TBFZ-0955 Chrome Color

Part Number Description Part Number Description

1) PBR-03-079-2412 Shelf 8) XXX-97-002-0005 Wrench

2) PBR-04-047-1650 Top Pole 9) PBR-02-012-0003 Divider

3) ZSV-01-029-1922 Pole Connector 10) XBK-01-011-1936 Slip Sleeve

4) PBR-04-048-1800 Middle Pole 11) PBR-05-028-1200 Handle

5) PBR-04-049-1825 Bottom Pole 12) ZSV-02-011-0001 Anti-tip Hardware Pack

6) ZSV-99-007-2008 Non-locking Caster 13) XBK-23-004-1911 End Cap

7) ZSV-99-008-2008 Locking Caster

TRINITY Customer Service provides the following replacement parts:

SERVICE PARTS LIST –TBFPBR-0955 Bronze Color

1. Read and understand all instructions. Failure to follow all instructions may result in injury

and/or damage.

2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed

could result in the caster stem breaking thereby causing the shelving rack to collapse.

3. The warnings, cautions, and instructions discussed in this manual cannot cover all

possible conditions or situations that may occur. The user must always be aware of the

environment where the product will be placed and make sure to use the product in a safe

and responsible manner.

4. Do NOT modify the product in any way. Unauthorized modification may impair the

function and/or safety of the product, and may affect the life of the product. Any

modifications will void product warranty.

5. Check for damaged parts.Before using this product, carefully check that all parts are in

good condition, and that the product will operate properly and perform its intended

function. Check for damaged parts and any other conditions that may affect the operation

of this product. Replace damaged or worn parts, and never use this product with a damaged

part.

6. Do NOT overload the product.

7. Do NOT allow children to climb or play around the product. Tipping may occur causing

injury.

8. Do NOT roll the product on an uneven surface. Only move the product on a smooth

surface. Rolling over rough or uneven surface may cause casters to break or items on the

product to fall, resulting in injury and / or damage.

9. Load the product evenly and place the heaviest items on the lower shelves.

10. Always lock the locking casters when not moving the product.

Weight capacity per shelf (evenly distributed) 50 lb

Total weight capacity of shelving rack (evenly distributed) 250 lb

WARNINGS

CARE AND MAINTENANCE

•Avoid harsh, abrasive cleaners, and other corrosive chemicals.

•This product is not certified for outdoor use.

Thank you for purchasing a TRINITY Basics 5-Tier Pantry Rack. In order to register your product and

receive streamlined customer service, please fill out the following Product Registration Form and (1)

fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com

or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt

with your submission.

First Name: Last Name:

Address:

City: State: Zip Code:

Email Address: Phone:

Product Model #: Purchase Date: / /

Location of Purchase:

Please rate the importance of each feature (1=least important; 10=most important)

Quality Price Size/Capacity Appearance Other

How did you hear about our product?

Magazine Ad Catalog Salesperson Word of Mouth

Internet Store Display Other

Marital Status: Single Married

Household Income: Below $50,000 $50,000-$150,000 $150,000+

Education: High School College Graduate School

Primary Residence: Own Rent

Comments/Suggestions:

PRODUCT REGISTRATION

Ce manuel convient aux modèles suivants

Table des matières

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur