TriMark e-FOB Manuel utilisateur
e-ASK
electronic Access Security Keyless-entry
e
e-
-FOB
FOB
/ e
/ e-
-PAD
PAD
Consumer Manual
Consumer Manual
FCC ID: TV2EFOB1
FCC ID: TV2EFOB1
(UM12 ~ 22271-02)
Table of Contents
Introduction .................................................................................. 1
e-FOB Operation and Features - Standard Mode...................... 2
e-FOB Operation and Features - Cargo Mode........................... 3
Standard e-PAD Operation and Features .................................. 4
Lock Doors with Keypad............................................................ 4
Using Secure Operations.......................................................... 4
Available Secure Operations..................................................... 4
Doorbell e-PAD Operation and Features ................................... 5
Lock Doors with Keypad............................................................ 5
Door Bell Operation................................................................... 5
Using Secure Operations.......................................................... 5
Available Secure Operations..................................................... 5
More e-PAD Features................................................................... 6
Protective Deactivating Security Feature.................................. 6
Buzzer Operation ...................................................................... 6
Grab Handle Lighting ................................................................ 6
Dome Light Activation ............................................................... 6
Emergency Override ................................................................. 6
Teaching Additional FOB Transmitters ..................................... 7
Training Wireless Switches....................................................... 8
Teaching Keypad New Authority / Access Codes .................... 9
Option 1...................................................................................... 9
Option 2...................................................................................... 10
Assign New Access Codes........................................................ 11
Additional System Features........................................................12
Light Activation ..........................................................................12
2nd Unlock Output.....................................................................12
3rd Unlock Output......................................................................12
2nd Auxiliary Output ..................................................................12
Panic Mode................................................................................12
Lock/Unlock Confirmation..........................................................12
Lock/Unlock Confirmation Control.............................................12
Emergency Override..................................................................13
Starter Kill Feature.....................................................................13
Smart LED .................................................................................13
Vehicle Alarm............................................................................13
Troubleshooting...........................................................................14
Introduction
This manual provides the necessary information for the proper
installation and use of TriMark’s Discrete e-PAD / e-FOB System.
The Discrete e-PAD / e-FOB system includes:
e-FOB (keyless entry radio frequency [RF] FOB transmitter and
receiver)
e-PAD or e-GRAB Handle (keypad user interface) - Keypad
integrated grab handle. Clean acrylic rod with mild soap and
water only.
The Full-Feature RF receiver and FOB transmitters are shipped
programmed. After making all necessary wiring connections the
e-PAD / e-FOB system will function as indicated in this manual.
1
TriMark Full-Feature
RF Controller
e-GRAB Handle
e-PAD - available vertical
or horizontal
Button Function
Lock Locks all doors and arms security system.
Unlock Unlocks doors and disarms security system. Also
activates the dome light.
Horn Activates panic mode when pressed and held for
2 seconds.
* button *button function is OEM/dealer defined. Possible
assignment include: interior/exterior lighting, awning
extension/retraction, gas cap, hood, etc.
e-FOB Operation and Features - Standard Mode
Notes:
While the engine is running only the entry unlock function of the
e-FOB remains activated —other functions are deactivated.
Horn button
Unlock button * button
Lock button
2
e-FOB Operation and Features - Cargo Mode
Cargo Lock
Entry Unlock
Button Function
Entry Lock Locks entry doors and arms security system.
Entry Unlock Unlocks entry doors and disarms security system. Also
activates the porch light.
Cargo Lock Locks compartment doors and arms security system.
Cargo Unlock Unlocks compartment doors and disarms security
system.
Cargo Unlock
Entry Lock
Notes:
While the engine is running only the entry unlock function of the
e-FOB remains activated —other functions are deactivated.
3
Standard e-PAD Operation and Features
The e-PAD is shipped with default Authority and Access Codes. Unless
the OEM or dealer has changed default codes, the Authority and
Access Codes are:
Access code:
Authority code:
Lock Doors with Keypad
Press and hold down the (1 / 2) or button for 1-2
seconds. An access code is not needed to lock the
doors.
Using Secure Operations
Entering a valid 5-digit Access Code provides a double-beep and
enables a secure operation. After entering an Access Code, the keypad
is enabled for 5 seconds and the next button pressed initiates a secure
operation, such as unlocking doors.
Notes:
The Authority Code does not allow for secure operations. It is only
used to assign access codes.
If an unassigned button or no button is pressed while the system
is enabled, the keypad reverts back to a disabled state.
If keypad does not provide a double beep, a valid Access Code
has not been entered.
Available Secure Operations
Button (1 / 2): Unlock entry doors.
Button (3 / 4): Unlock doors wired to 2ndUnlock output.
Button (5 / 6): N/A
Button (7 / 8): Sequentially activate entry unlock and 2nd unlock
outputs.
Button (9 / 0): Toggle dome light output.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7 / 8 7 / 8 7 / 8 7 / 8 7 / 8
4
Doorbell e-PAD Operation and Features
Access code:
Authority code:
Lock Doors With Keypad
Press and hold down the (1) button for 1-2 seconds. An access
code is not needed to lock the doors.
Door Bell Operation
The doorbell button provides a 0.5 second ground pulse from the 2nd
Auxiliary output when pressed. An access code is not necessary for the
doorbell. DIP Switch #8 and #9 of the RF receiver must be OFF to
provide the correct output.
Using Secure Operations
Entering a valid 5-digit access code provides a double beep and
enables a secure operation. After entering an access code, the keypad
is enabled for 5 seconds and the next button pressed initiates a secure
operation, such as unlocking doors.
Notes:
The authority code does not allow for secure operations. It is only
used to assign access codes (see page 9 for information on
setting authority and access codes).
If an unassigned button or no button is pressed while the system
is enabled, the keypad reverts back to disabled state.
If keypad does not provide double beep, a valid access code has
not been entered.
Available Secure Operations
Button (1): Unlock entry doors.
Button (2): Unlock doors wired to 2ndUnlock output.
Button (3): NA
Button (4): Sequentially activate entry unlock and 2nd unlock
outputs.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 2 3 4 4
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
4 4 4 4 4
5
More e-PAD Features
Protective Deactivating Security Feature
If a correct code is not entered after 20 button presses, the keypad
enters an inactive mode that disables button recognition for 1 minute.
This helps prevent unauthorized access by entering random codes.
There is no button feedback while the system is disabled.
Buzzer Operation
The keypad buzzer chirps once when power is first applied to the
keypad and for each key press during regular use. When an authorized
access code is entered, the system chirps twice to indicate readiness to
secure operation.
The keypad chirps twice for each button press while in learn mode.
When a new access code is defined, the system chirps 3 times. If an
incorrect code is entered during learn mode, there is a 1-2 second
chirp.
Grab Handle Lighting
The acrylic rod LED is powered separately from the keypad. The OEM
wiring determines when the rod is lit. The e-PAD is lit with a button
press and while training new access and authority codes.
Dome Light Activation
The dome light is toggled on for 5 minutes with a secure (9 / 0)
operation. Repeating the (9 / 0) operation while the dome light is on will
turn the light off.
Emergency Override
To disarm the alarm in case of FOB transmitter and access code loss:
1. Turn ignition on (apply 12V to yellow wire of C1).
2. Press and hold the push button for 3 seconds.
3. Turn ignition off (remove 12V from yellow wire of C1).
6
7
Teaching Additional FOB Transmitters
1. Plug the LED into C6 and the push button into C7 on the
receiver. These may already be plugged into your module by the
OEM.
2. Turn ignition off and disarm alarm.
3. Press and release the programming button 3 times. The LED will
turn on red after 3 seconds.
4. Press and release the Lock button of each new FOB transmitter
once. The LED will flash off and the horn will sound once. Up to
60 transmitters may be programmed at one time.
5. Repeat step 4 until all fobs are programmed.
Notes:
If you place the system in learn mode and teach nothing, the
system will exit in 10 seconds.
When new transmitters are taught, all old transmitters are
erased.
The memory for codes will not be erased if power is removed.
As soon as the LED turns off, the system is fully functional.
Autres manuels pour e-FOB
4
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels TriMark Démarreur à distance
TriMark
TriMark e-ASK UM 36 Manuel utilisateur
TriMark
TriMark 500-1300 e-ASK Manuel utilisateur
TriMark
TriMark e-PAD Manuel utilisateur
TriMark
TriMark e-ASK UM15 Manuel utilisateur
TriMark
TriMark e-ASK Manuel utilisateur
TriMark
TriMark e-ASK UM06 Manuel utilisateur
TriMark
TriMark 500-1300 e-ASK Manuel utilisateur
TriMark
TriMark e-FOB Manuel utilisateur
TriMark
TriMark e-ASK Manuel utilisateur
TriMark
TriMark e-ASK Manuel utilisateur
