TRENDnet TEW-638APB Manuel utilisateur

TEW-638APB

H/W: V1

Quick Installation Guide

Table of Contents

English ...................................................................................................... 1

1. Before You Start

2. Hardware Installation ..........................................................................

................................................................................

Table of Contents

Version 01.31.2009

Troubleshooting ........................................................................................ 8

Installation Requirements

Application

Package Contents

1. Before You Start

English

TEW-638APB

User's Guide CD-ROM

Multi-Language Quick Installation

Guide

AC Power Adapter (12V DC, 1A)

1 RJ-45 cable

?A computer with a network adapter or wireless adapter properly installed.

?A router with an available network LAN port

?A RJ-45 network cable

Web Browser: Internet Explorer (6 or higher)

300Mbps Wireless N Access Point

(TEW-638APB)

Wireless N Router

Internet

AP Client

300Mbps Wireless N Access Point

(TEW-638APB)

4-Port Gigabit Firewall Router

(TWG-BRF114)

2-Bay SATA I/II Network

Storage Enclosure

(TS-S402)

Cable/DSL Modem

Workstation

Game Console

8-Port 10/100Mbps Switch

(TE100-S8)

Cable/DSL

Modem

Internet

Bridge Mode

LAN B

LAN A

Bridge Mode

AP Client Mode

2. Hardware Installation

English

For Windows Users

3. Click Setup Wizard.

1. Insert Driver CD-ROM.

2. Click Run Setup.exe (Windows

Vista only)

4. Click I accept the terms in the

License Agreement and then click

Next.

Note:

1: Locate an optimum location for the Access Point. The best place for the

Access Point is usually at the center of your wireless network.

2: Disable any anti-virus and firewall programs before starting hardware

installation.

English

6. Connect a RJ-45 cable from a LAN

port on your Router to the Ethernet

port on your computer.

5. Connect the provided RJ-45 cable

from a LAN port on your Router to

the LAN port on the TEW-638APB.

Then click Next.

7. Connect the AC Power Adapter to

the Access Point and then to a

power outlet and then click Next.

8. Select the TEW-638APB from the

list and then click Configure.

English

10. Select Access Point and then

click Next.

Note: For AP Client setup, please

refer to the User's Guide for step

by step instructions. The User's

Guide can be found on this

product's CD-ROM.

11. Select Dynamic IP Address

Configuration and then click

Configure.

9. Enter a password and then click

admin.

12. Select Manual setup and then

click Next.

English

16. Select the desired WPA mode,

enter characters for your Pre-

Shared key, keep Cipher Type as

TKIP and AES and then click

Next. For WPA-PSK or WPA2-

PSK, the Pre-Shared Key must

be between 8 and 63 ASCII or 64

HEX characters. Make sure to

copy down the Pre-Shared Key.

14. Select the desired Wireless

Mode and then click Next.

15. Select a Security Mode and then

click Next (example shows

WPA-PSK).

13. Enter a SSID and then click Next.

By default, the SSID is

TRENDnet638.

English

19. Click Confirm to apply the

settings.

18. Give the file a name, then click

Save (optional).

20. Click Exit.

17. Click Save (optional).

English

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

Note: To connect a wireless computer to the TEW-638APB, refer to Question 1

in the Troubleshooting section.

Your configuration is now complete.

For detailed information regarding the TEW-638APB's configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

21. Click Yes to exit.

Troubleshooting

Q1:

A1:

A2:

A3:

A4:

A5:

All the settings are correct, but I can not make a wireless connection to the Access

Point.

First, double check that the wireless LED on the Access Point is lit. Second, power cycle

the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the

power back in. Third, contact the manufacturer of your wireless network adapter. Make sure

the wireless network adapter is configured with the proper SSID. The default SSID of the

Access Point is TRENDnet638. If you have enabled any encryption on the Access Point,

make sure to configure the wireless network adapter with the same Pre-shared key.

: I am trying to connect additional wireless adapters, but I don't remember the encryption

(network) key. What should I do?

From a wired computer, log on to the access point configuration page. Click Wireless ->

Security. The encryption key will be listed here.

: I have a wireless adapter that supports WiFi Protected Setup (WPS) push button setup.

How do I setup WPS between the TEW-638APB and my wireless adapter?

First, press on the WPS button on the front of the TEW-638APB for 10 seconds.

Second, refer to your wireless adapters for instructions on setting up WPS.

: I followed the Quick Installation Guide and setup a new password. When I log in to the

browser configuration an access error message appears. What should I do?

The default user name is admin and the default password is admin. When you log in to

the browser configuration for the first time, make sure to enter admin for user name. Do not

leave the user name field blank.

: How do I configure AP mode on the TEW-638APB?

Please refer to the User Guide. The User Guide is on the Utility CD-ROM drive.

If you still encounter problems or have any questions regarding the TEW-638APB,

please contact TRENDnet's Technical Support Department.

Autres manuels pour TEW-638APB

Table des matières

Autres manuels TRENDnet Point d'accès sans fil

TRENDnet

TRENDnet TEW-740APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-638PAP Manuel utilisateur

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-826DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-815DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-755AP Manuel utilisateur

TRENDnet

TRENDnet TEW-690AP Manuel utilisateur

TRENDnet

TRENDnet TEW-636APB Manuel utilisateur

TRENDnet

TRENDnet TEW-310APB Manuel utilisateur

TRENDnet

TRENDnet TEW-825DAP(V1) Manuel utilisateur

TRENDnet

TRENDnet TEW-740APBO2K Manuel utilisateur

TRENDnet

TRENDnet TEW-825DAP Manuel utilisateur

TRENDnet

TRENDnet TPL-210AP Manuel utilisateur

TRENDnet

TRENDnet TEW-450APB - Wireless Super G Access Point Manuel utilisateur

TRENDnet

TRENDnet TEW-410APB Manuel utilisateur

TRENDnet

TRENDnet TEW-841APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-753DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-821DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-735AP Manuel utilisateur

TRENDnet

TRENDnet TEW-AP100 Manuel utilisateur

TRENDnet

TRENDnet TEW-815DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-690AP Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur