TRENDnet TV-IP311PI Manuel utilisateur

TRENDnet User’s Guide TV-IP311PI

Product Overview

TV-IP311PI

Features

The Outdoor 3 MP PoE Dome Day/Night Network Camera, model TV-

IP311PI, provides powerful 3 megapixel night vision in complete darkness

for up to 25 meters (82 ft.). This ultra-compact vandal resistant fixed dome

camera is outdoor ready with an IP66 weather rated housing. It comes with

a free Apple® and Android™ mobile app and Complimentary pro-grade

software to manage up to 32 TRENDnet cameras.

Hardware

PoE

Save installation costs with Power over Ethernet (PoE)

Power Port

Optional power port for non-PoE installation

Outdoor Ready

Outdoor IP66 weather rated

Vandal Resistant

Impact protection rated: IEC60068-275Eh, 50J; EN50102, exceeding IK10

Performance

3 Megapixel

Record 2048 x 1538 pixel video at 15 fps in H.264 compression

Night Vision

Night vision up to 25 meters (82 ft.) in complete darkness

Smart IR

Dynamic IR adjustment optimizes night visibility

Digital Zoom

Digitally zoom anywhere within the viewing field

IPv6

IPv6 support

Advanced Playback

Advanced in-camera archived video review functionality

TRENDnet User’s Guide TV-IP311PI

D-WDR

Digital Wide Dynamic Range improves video quality in high contrast lighting

environments

Storage

Samba video support with notification if storage drive is full

Free Apps

See live video on a mobile device with free Apple® and Android™ apps

Complimentary Software

Complimentary pro-grade software to manage up to 32 TRENDnet cameras

Package Contents

TV-IP311PI package includes:

•TV-IP311PI

•Multi-Language Quick Installation Guide

•CD-ROM (Utility and User’s Guide)

•Camera mounting hardware

•(Optional power adapter not included)

If any package content is missing or damaged, please contact the retail store, online

retailer, or reseller/distributor from which the product was purchased.

Drilling Template

Mounting Screws

Network Cable

Waterproof Accessories

Torx Screw Driver

TRENDnet User’s Guide TV-IP311PI

1. Mounting base

2. Horizontal stand

3. Vertical stand

4. Lower dome

5. Cables

6. Infra-red lamps

7. Lens

8. Black Liner

9. Safety rope

Physical Descriptions

Angle Adjustment

Loosen the tilt lock screws, adjust the tilting position in a range from 15to

90, and tighten the tilt lock screws.

Reset Button

Push and hold the reset button then power on the camera. Keep holding the

reset button for more than 10 seconds to reset configuration to factory

default.

Screw

Reset Button

10/100 PoE

Network Port

DC Power

12V DC 1A

(Optional)

TRENDnet User’s Guide TV-IP311PI

Warnings

Serious injury or death may be caused if any of these warnings are

neglected. Follow these safety guards to prevent serious injury or death.

•If using the power adapter, please choose the power adapter that

meets the safety extra low voltage (SELV) standard or IEC60950-1 and

Limited Power Source standard.

•If the product does not work properly, please contact your dealer or

the nearest service center. Never attempt to disassemble the camera

yourself. Disassembling the product will void the warranty and may

cause harm or injury.

•To reduce the risk of fire or electrical shock, do not expose this

product to rain or water.

•The installation should be done by a qualified service person and

should conform to all construction and electric regulations and other

local codes.

Cautions

Injury or equipment damage may be caused if any of these cautions are

neglected. Follow these precautions to prevent potential injury or material

damage.

•Make sure the power supply voltage is correct before using the

Camera.

•Do not drop the camera or subject to physical shock.

•Do not touch sensor modules with fingers. If cleaning is necessary, use

a clean cloth with a bit of ethanol and wipe it gently. If the camera will

not be used for an extended period of time, put on the lens cap to

protect the sensor from dirt.

•Do not aim the camera lens at the strong light such as the Sun or an

incandescent lamp. Strong light can damage the camera sensor.

•The sensor may be burned out by a laser beam, so when any laser

equipment is being used, make sure that the surface of the sensor will

not be exposed to the laser beam.

•Do not place the camera in extremely hot, cold temperatures (the

operating temperature should be between -10°C to 60°C), dusty or

damp environment, and do not expose it to high electromagnetic

radiation.

•To avoid heat accumulation, good ventilation is required for a proper

operating environment.

•Keep out of water and any liquid.

•While shipping, the camera should be packed in its original packing.

TRENDnet User’s Guide TV-IP311PI

Installation Procedure

There are number of factors involved in a successful camera installation.

Follow the suggested installation steps and go through the check lists. This

guide will help you make your camera installation smoothly and easily.

•Plan for installation location, see page 7 (next paragraph)

•Setup Your Camera with CD, see page 8

•

TRENDnet User’s Guide TV-IP311PI

•Hardware Installation, see page 12

Plan for installation location

Viewing angle

The TV-IP311PI is a dome camera with a focused viewing angle (70

horizontal) that provides non-distorted and detailed images. Choose the

location where has good angle to shoot the image you expect to see. The

motion detection area should also be considered when installing the camera.

Weather Conditions

The TV-IP311PI is a small dome camera, which fits most installations indoor

and outdoor. The camera can work under a wide range of weather

conditions. For severe weather conditions, a camera housing with

temperature and moisture control is recommended. Using the camera in

milder weather conditions will help extend the camera’s product life and

preserve the quality of the video image.

•Moisture: Avoid damp or moist environments whenever you can.The

TV-IP311PI is an IP66 grade water proof camera, and it will work in

moist environments. However, rain may affect the picture quality,

especially at night, water may reflect the light from the infra-red

illumination and degrade picture quality. Install your camera in dry

weather when possible and sealing well when you screw on the cap.

•Temperature: TV-IP311PI works within a specified temperature range.

Areas with severe temperatures should be avoided when installing

the camera. It’s recommended that you use an enclosure with a

heater and blower if you plan on using this camera outside of the

specified temperature range.

•Sunlight: Avoid direct sun light exposure. Direct sun light will damage

the image sensor. If sunlight is necessary for your viewing purposes,

provide protection for the image sensor.

•Lighting: Consider installing your camera faces the same direction of

the light sources. Shooting images with top-down position outdoor or

next to the existing light source are good choices. Avoid the light

source if it creates a shade that darkens the viewing area.

TRENDnet User’s Guide TV-IP311PI

Setup Your Camera with CD

1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to

initiate the Auto-Run program. Choose your preferred language and

then click the Install Camera.

2. Write down the MAC Address of the camera.

3. Connect a PoE capable network cable to the camera’s network port and

then to a PoE switch and wait for the camera to boot up. Click Next

when you are done.

* A power adapter (sold separately) can be used instead of PoE switch.

4. Wait while the utility is searches for the camera.

TRENDnet User’s Guide TV-IP311PI

5. The installation wizard will list cameras found on your network. If only

one camera is found, it will be selected by default. If you have more

than one camera on the network, please choose the camera you wish to

set up by identifying its MAC address. Select the camera and then click

Next.

6. Select the DHCP option to assign IP address dynamically, or select Fixed

IP to assign the camera an IP address, and then click Next.

7. If you select Fixed IP, enter the IP address, subnet mask, default

gateway, and DNS server address. Please make sure the IP address you

are setting on the camera is in the same network of the computer that

you are using. Click Next.

TRENDnet User’s Guide TV-IP311PI

8. Enter a new password. The default password is admin.You are required

to change the password from the default setting to prevent

unauthorized access. Enter the default password: admin and enter the

new passwords for a brand new installation. The password must be

between 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $)

Note: This camera installation wizard is also good for finding the camera if it

was setup with DHCP. The IP address may change dynamically with the DHCP

setting. If you want to access your camera again and you don’t know the IP

address, you can run this camera installation wizard again. If you have already

setup the password and want to keep the password unchanged, un-check the

Change Password box and click next to get the link to access your camera.)

9. Click here to access to the camera’s web page or click Next for mobile

app installation.

Autres manuels pour TV-IP311PI

Table des matières

Autres manuels TRENDnet Caméra de sécurité

TRENDnet

TRENDnet TV-IP410WN Manuel utilisateur

TRENDnet

TRENDnet TV-IP312W - SecurView Wireless Day/Night Internet Surveillance Camera... Manuel utilisateur

TRENDnet

TRENDnet TV-IP751WC Manuel utilisateur

TRENDnet

TRENDnet TV-IP322P - V1.01 QUICK Manuel utilisateur

TRENDnet

TRENDnet TV-IP322P Manuel utilisateur

TRENDnet

TRENDnet TV-IP501W Manuel utilisateur

TRENDnet

TRENDnet TV-IP422WN Manuel utilisateur

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Manuel utilisateur

TRENDnet

TRENDnet TV-IP110W - Wireless Internet Camera Server... Manuel utilisateur

TRENDnet

TRENDnet TV-H400 Manuel utilisateur

TRENDnet

TRENDnet TV-IP200W Manuel utilisateur

TRENDnet

TRENDnet TV-IP662WI Manuel utilisateur

TRENDnet

TRENDnet TV-IP311PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP323PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP314PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP651W Manuel utilisateur

TRENDnet

TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Manuel utilisateur

TRENDnet

TRENDnet TV-IP312 Manuel utilisateur

TRENDnet

TRENDnet TV-IP312WN Manuel utilisateur

TRENDnet

TRENDnet TV-IP430PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP851WC Manuel utilisateur

TRENDnet

TRENDnet TV-IP100W Manuel utilisateur

TRENDnet

TRENDnet TV-IP322P Manuel utilisateur

TRENDnet

TRENDnet TV-IP422 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur