TRENDnet TS-S402 - Diskless SATA I/II Network Attached Storage... Manuel utilisateur

Quick Installation Guide

TS-S402

Table of Contents

Version 11.28.2007

English .....................................................................................................

Troubleshooting ........................................................................................

1. Before You Start

2. .........................................................................

.................................................................................

Hardware Installation

Configure the Storage Server

4. Using the TS-S402 .............................................................................

3. ............................................................

System Requirements

Application

Package Contents

1. Before You Start

English

Note: Hard Drive and USB Storage Device are not included.

Cable/DSL

Modem

300Mbps Wireless N

Gigabit Router

(TEW-633GR)

Workstation with

Gigabit PCI Adapter

(TEG-PCITXR)

10/100Mbps Multi-Port

Print Server

(TE100-P21)

Internet

2-Bay SATA I/II Network

Storage Enclosure

(TS-S402)

Printers

10/100Mbps Gigabit

Notebook with

300Mbps Wireless N

PC Card

(TEW-621PC)

Wireless 300Mbps

?Utility CD-ROM

?Power Cord

?AC Power Adapter (12V DC, 7.0A)

?Mounting Brackets

Quick Installation Guide

TS-S402

?A computer with a network adapter properly installed

?A network Switch or Hub with an available network LAN port

?A RJ-45 network cable.

?SATA I/II Hard Drive or USB 2.0 Storage Device (i.e. flash drive, external

hard drive)

?iTunes (optional)

Web Browser: Internet Explorer (6.0 or higher)

2. Hardware Installation

English

4. Repeat steps 1-3 for a second hard

drive.

3. Insert the hard drive into one of the

two slots. Then connect the SATA

data and power cable to the hard

drive.

2. On the front of the TS-S402, press

push to open up the enclosure

door.

5. If you have a USB storage device,

connect it to one of the 2 USB

ports on the front or back of the

TS-S402.

1. Secure the supplied hard drive

brackets to both sides of a 3.5”

SATA hard drive using the provided

screws.

English

7. Connect the power cord to the

power adapter.

Your hardware installation is now complete.

6. Connect a RJ-45 cable from the

Switch/Hub to the LAN port of the

TS-S402.

8. Connect the External Power

Adapter to the Storage Server and

then to a power outlet.

9. Press the power button.

10. Verify that the following panel

lights are on: Power, LAN, HDD.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

English

3. Configure the Storage Server

Note: It is recommended that you configure the Storage Server from a wired

computer. Since the Storage Server's default IP address is 192.168.10.10,

make sure no other network devices are assigned an IP address of

192.168.10.10.

For Windows Users

3. Double-click the NAS Utility icon.

2. Follow the Installation Wizard

instructions and then click Finish.

Repeat step 1 and 2 for each

Windows client PC.

4. Select the storage server and click

Attach.

1. Insert the Utility CD-ROM into

your computer's CD-ROM Drive

and then click Install Utility.

English

7. Select the Format Type (e.g.

EXT2, EXT3) and then click Next.

5. Click Yes.

6. Enter the administrator User ID

and Password. Then click Login.

By default:

User: admin

Password: admin

8. Click OK to continue.

9. Click Finish.

English

Your configuration is now complete.

For detailed information regarding the TS-S402 configuration and advanced

settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or

TRENDnet's website at http://www.trendnet.com.

10. Click Device Setting.

11. Enter the administrator User

name and Password, and then

click OK. By default:

User Name: admin

Password: admin

12. Click Configuration, and then click

Networking. Configure the IP

Address, Subnet mask,

Gateway and then click Modify.

Note: The IP Address must match

the network segment of your

network.

English

4. Using the TS-S402

Add User

3. Click the green plus sign to add

additional users.

Note: A User Name can only be

used on one computer at a time.

Add a user name for each client

that will have access to the

TS-S402.

1. In the browser configuration, click

Share Management, then user

management. Then click on the

green plus sign. If you are creating

a shared folder, skip this step and

continue on to Create Folder.

2. Enter a User Name and Password,

confirm the password and then

click Apply.

English

Access Folder on Windows Client PC

Create Folder

1. Click Share Management, then

click Share Folder. Select the

Disk Name, and enter a Folder

Name.

Shared Folder

Select Anonymous, and then

click apply.

Private Folder

Click Private Folder. Select a

user, then click Add New User.

Click Read Only to give read only

access, then click Apply.

1. Open up the NAS utility (see step

2 and 3 under Section 3: Configure

the Storage Server)

2. Enter the client's User (user name)

and Password. Then click Login.

See Add User above if you have

not added a user.

Autres manuels pour TS-S402 - Diskless SATA I/II Network Attached Storage...

Table des matières

Autres manuels TRENDnet Serveur de stockage réseau

TRENDnet

TRENDnet TS-I300W Manuel utilisateur

TRENDnet

TRENDnet TS-U200 - NAS Server - USB Manuel utilisateur

TRENDnet

TRENDnet TS-D40G Manuel du propriétaire

TRENDnet

TRENDnet TN-200 Manuel utilisateur

TRENDnet

TRENDnet TS-S402 - Diskless SATA I/II Network Attached Storage... Manuel utilisateur

TRENDnet

TRENDnet TS-U100 - NAS Server - USB Manuel utilisateur

TRENDnet

TRENDnet TS-U100 - NAS Server - USB Manuel utilisateur

TRENDnet

TRENDnet TS-I300 - NAS Server - ATA-133 Manuel utilisateur

TRENDnet

TRENDnet TS-U200 - NAS Server - USB Manuel utilisateur

TRENDnet

TRENDnet TS-U100 - NAS Server - USB Manuel utilisateur

TRENDnet

TRENDnet TS-I300 - NAS Server - ATA-133 Manuel utilisateur

Manuels Serveur de stockage réseau populaires d'autres marques

HP NetStorage 6000 Manuel utilisateur

Seagate

Seagate U10 ST320423A Manuel utilisateur

Synology

Synology RackStation RS816 Manuel

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuel utilisateur

Avid Technology

Avid Technology VideoRAID ST Guide de sécurité

Western Digital

Western Digital My Cloud Home Duo Manuel utilisateur

PrimeArray

PrimeArray 4xxx Manuel utilisateur

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuel utilisateur

Planex

Planex MZK-NAS01SG Manuel utilisateur

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuel utilisateur

Synology

Synology RS2212+ Manuel utilisateur

Allnet

Allnet ALL69000 Manuel utilisateur

Adaptec

Adaptec 5325301580 Manuel utilisateur

Motorola

Motorola EXORdisk II Manuel utilisateur

Sony

Sony XDAAI1PK Manuel utilisateur

Cisco

Cisco Linksys NAS200 Instructions d'utilisation d'origine

Sans Digital

Sans Digital MR4UT6G Manuel utilisateur

AIC

AIC FB128-LX Manuel utilisateur