TRENDnet TEG-PCITX2 Manuel utilisateur

TEG-PCITX2

64-bit PCI

10/100/1000Mbps NWay

Gigabit Ethernet Card

User’s Guide

FCC Warning

This equipment has been tested and found to comply with the

regulations for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with this user’s guide, may cause harmful interference to

radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will

be required to correct the interference at his own expense.

CE Mark Warning

This is a Class B product. In a domestic environment, this product

may cause radio interference, in which case the user may be required

to take adequate measures.

VCCI Warning

P/N: 6012-GA2000T01 Rev.A1-01

TABLE OF CONTENTS

INTRODUCTION.........................................................................1

FEATURES .................................................................................................1

GIGABIT ETHERNET TECHNOLOGY...............................................2

FAST ETHERNET TECHNOLOGY......................................................3

UNPACKING AND INSTALLATION....................5

UNPACKING..............................................................................................5

INSTALLING THE GIGABIT ETHERNET CARD............................6

CONNECTING THE NETWORK CABLE ...........................................6

SOFTWARE INSTALLATION................................................................7

LED INDICATORS.....................................................................9

TECHNICAL SPECIFICATIONS............................11

INTRODUCTION

Thank you for choosing the 10/100/1000Mbps NWay Gigabit

Ethernet Card for 32/64-bit PCI Bus-equipped personal computers.

The 64-bit PCI 10/100/1000Mbps NWay Gigabit Ethernet Card is

ideal for speeding up data transfers for network servers and other

computers, such as those used for video-conferencing, that send

and/or receive large amounts of data. The 64-bit PCI

10/100/1000Mbps NWay Gigabit Ethernet Card also includes the

newest networking technologies, such as VLAN and multicasting

support, that use network bandwidth more efficiently and further help

the card maximize data throughput.

Features

?? IEEE 802.3, 802.3u and 802.3ab compliant

?? Support 32/64-bit 33/66Mhz PCI Local Bus Master high-speed

operation of Rev.2.1/2.2 specification

?? Plug-and-Play installation

?? One RJ-45 connector: Auto detection of 10Mbps Ethernet,

100Mbps FastEthernet, 1000Mbps Gigabit Ethernet & Auto

MDI-X

?? Supports 10/100/1000MbpsAuto-negotiation operation

?? Full Duplex support for 10/100/1000Mbps data rates

?? Auto MDI-II/MDI-X crossover for all three speeds

?? Built-in 8 KB Transmit and 32 KB Receive data FIFOs

?? Virtual LAN (VLAN) and long frame support. VLAN tag

insertion supports for transmit packets. VLAN tag detection and

removal for receive packets

?? 802.3x Full duplex flow control, including automatic

transmission of Pause frames based on Rx FIFO thresholds

?? 802.1P and 802.1Q priority queuing support. Supports multiple

priority queues in both transmit and receive directions.

?? Six LED indicators for easy diagnostic

Gigabit Ethernet Technology

Gigabit Ethernet is an extension of IEEE 802.3 Ethernet

utilizing the same packet structure, format, and support for

CSMA/CD protocol, full duplex, and management objects,

but with a tenfold increase in theoretical throughput over

100Mbps Fast Ethernet and a one hundred-fold increase

over 10Mbps Ethernet. Since it is compatible with all

10Mbps and 100Mbps Ethernet environments, Gigabit

Ethernet provides a straightforward upgrade without

wasting a company’s existing investment in hardware,

software, and trained personnel.

The increased speed and extra bandwidth offered by Gigabit

Ethernet is essential to coping with the network bottlenecks

that frequently develop as computers and their busses get

faster and more users use applications that generate more

traffic. Upgrading key components, such as your backbone

and servers to Gigabit Ethernet can greatly improve network

response times as well as significantly speed up the traffic

between your subnets.

Gigabit Ethernet enables Twisted-Pair cable connections to

support video conferencing, complex imaging, and similar

data-intensive applications. Likewise, since data transfers

occur 10 times faster than Fast Ethernet, servers outfitted

with Gigabit Ethernet NIC’s are able to perform 10 times the

number of operations in the same amount of time.

Fast Ethernet Technology

The growing importance of LANs and the increasing complexity of

desktop computing applications are fueling the need for high

performance networks. A number of high-speed LAN technologies

have been proposed to provide greater bandwidth and improve

client/server response times. Among them, 100BASE-T (Fast

Ethernet) provides a non-disruptive, smooth evolution from the

current 10BASE-T technology. The non-disruptive and smooth

evolution nature, and the dominating potential market base, virtually

guarantee cost effective and high performance Fast Ethernet solutions

in the years to come.

100Mbps Fast Ethernet is a new standard specified by the IEEE 802.3

LAN committee. It is an extension of the 10Mbps Ethernet standard

with the ability to transmit and receive data at 100Mbps, while

maintaining the CSMA/CD Ethernet protocol. Since the 100Mbps

Fast Ethernet is compatible with all other 10Mbps Ethernet

environments, it provides a straightforward upgrade and takes

advantage of the existing investment in hardware, software, and

personnel training.

UNPACKING AND INSTALLATION

This chapter provides unpacking and installation information for the

64-bit PCI 10/100/1000Mbps NWay Gigabit Ethernet Card.

Unpacking

CAUTION: Under ordinary circumstances, the 64-bit PCI 10/100/1000Mbps NWay

Gigabit Ethernet Card will not be affected by static charge as may be

received through your body during handling of the unit. However, there

are special circumstances where you may carry an extraordinarily high

static charge, and possibly damage the card and/or your computer. It is

good practice to eliminate all static electricity by touching a ground (an

unpainted metal area of your computer chassis, for example) before

performing any installations.

Open the shipping carton and carefully remove all items. In addition

to this User's Guide, ascertain that you have:

?? One 64-bit PCI 10/100/1000Mbps NWay Gigabit Ethernet Card.

?? One Driver Diskette

?? This User’s Guide.

If any item is found missing or damaged, please contact your local

reseller for replacement.

Installing the Gigabit Ethernet Card

1. Shut down the computer, unplugs its power cord, and remove the

chassis cover.

2. Insert the contact edge of the Gigabit Ethernet card into the

connector of any available PCI Bus Master expansion slot. Press

the card firmly into the connector such that the card’s contacts are

fully seated in the connector.

3. Install the bracket screw and secure the card to the computer chassis.

4. Replace the computer’s chassis cover.

5. Reconnect the computer’s power cord, and switch computer power

on. If the BIOS section of your computer’s boot program is Plug-

and-Play compliant, then at power-up the BIOS will automatically

configure any newly installed the Gigabit Ethernet Card.

NOTE: Due to a fault in some Plug-n-Play BIOS programs, it happens occasionally

that a newly installed adapter is assigned an Interrupt Number which is

already assigned to another device. In such a case, the conflict of Interrupt

Number will cause faults in the behavior of both devices. Install the adapter in

a different slot or run the CMOS Setup utility, and manually assign a non-

conflicting Interrupt Number (see Motherboard Manual for more information).

Connecting the Network Cable

Four pair of Cat.5 UTP or STP cable with RJ-45 connector is required

for the 64-bit PCI 10/100/1000Mbps NWay Gigabit Ethernet Card.

You can use standard or crossover cable to connect the switch’s MDI-

X or MDI-II port, because the 64-bit PCI 10/100/1000Mbps NWay

Gigabit Ethernet Card will adjust the correct medium configuration

automatically.

Autres manuels pour TEG-PCITX2

Table des matières

Autres manuels TRENDnet Carte réseau

TRENDnet

TRENDnet TFM-CF56 Manuel utilisateur

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

TRENDnet

TRENDnet TEM-336T Manuel utilisateur

TRENDnet

TRENDnet TEW-603PI Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIWA Manuel utilisateur

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Manuel utilisateur

TRENDnet

TRENDnet TEW-PC16 Manuel utilisateur

TRENDnet

TRENDnet TE100-S4PCI Manuel utilisateur

TRENDnet

TRENDnet TE100-PC16R Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIWS Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXRL Manuel utilisateur

TRENDnet

TRENDnet TEG-PCISX Manuel utilisateur

TRENDnet

TRENDnet TE-16PNP Manuel utilisateur

TRENDnet

TRENDnet TEW-226PC Manuel utilisateur

TRENDnet

TRENDnet TEW-421PC Manuel utilisateur

TRENDnet

TRENDnet TEW-501PC Manuel utilisateur

TRENDnet

TRENDnet TPL-430AP Manuel utilisateur

TRENDnet

TRENDnet TE100-PCBUSR - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet Te100-pciwn Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur

TRENDnet

TRENDnet TE100-PCIA Manuel utilisateur

TRENDnet

TRENDnet TEW-USB Manuel utilisateur

TRENDnet

TRENDnet TEW-PC16 Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur

Gigafast

Gigafast EE101-AEX Manuel utilisateur

D-Link

D-Link DHP?P309AV Manuel utilisateur