Ver.01
* Specifications subject to change without prior notice.
* Copyright ©2011 TRANSYSTEM, INC. all rights reserved.
Overview
747ProS is a powerful GPS Datalogger comes with the latest MTK chipset to
work under most of circumstance. 747ProS allows you to log your route by
setting the interval of time/ distance/ speed and intelligent auto gear function and
motion sensor for smart logging(smart mode) to save memory and power.747ProS
also implement with special power circuit design to start logging when car start
and protect the electric serge from car power (Car mode). Easy to use and through
user friendly utility, it can display the tracks on Google Earth/Map.
●Appearance & LED indications.
Smart log mode
Car log mode
1. Slide switch
Power off
Blue - Always OFF = Motion sensor OFF
Blue - Blink every 2 seconds = logging, Motion sensor ON
2. Motion
sensor
LED
Blue - Blink every 5 seconds = power saving mode
Green - always ON = Charging
Green - OFF = Fully charged
3. Battery
status
LED
Red - always ON = Low battery
Orange - always ON = Not Fix and searching for satellite
Orange - Blink every 2 seconds=GPS fix and logging (smart mode)
Orange - Blink every 1 second=GPS fix and logging (car mode)
Orange - OFF = Power saving mode or power off
Red - always ON = memory full
Red - Blink every 2 seconds= 80% memory occupied
4. GPS &
Memory
status
LED
Red - Quick blink 3 times = POI recorded
5. USB Port For power supply and data exchange
One click To record POI
Press for 4 seconds
To turn on/off buzzer
6. POI button
Press for 8 seconds
To turn on/off motion sensor
● Key Features
Built-in MTK II GPS High performance GPS solution with A-GPS for instant fix less than 15 seconds.
Built-in 64Mb memory
Capacity for up to 250,000 waypoints recording.
Rechargeable Battery 850mA Li-ion battery for up to 30 hours operation time and 300 hours standby time.
Default is “ON” for both smart mode and car mode.
Mode change Quick beep 1 time (can nit be turned off)
POI recorded Quick beep 3 times
GPS Fix Quick beep 2 times.
Buzzer function for POI record and GPS fix can be turned on/off by pressing the POI button for 4
seconds or provided software.
Built-in buzzer
Turn on/off buzzer long beep 2 times
Built-in motion sensor
For automatically start/ stop logging and smart power management and waypoint saving.
747ProS will enter power saving mode when it is static for 2 minutes and recover when motion is
detected. (This function is turned on as default at smart mode and turned off as default at car mode and
can be turned off/on by pressing the POI button for 8 seconds or provided software)
Car mode 747ProS goes into power saving mode when external power supply is not detected and recover when
external power supply is detected.
Smart Log mode
Motion sensor is turned on as default and log time interval will be changed according to the speed
detected by the Device to save power and memory.
Speed for each time interval can be programmed by the provided software.
Built-in Mini USB port
For power charging and data exchange.
Use the changer which output 5V, 0.5A~1A current to charge the battery.
Connect to PC to download the logged data or upload the A-GPS EPO data.
*Connect to Laptop via USB cable to work as a wired GPS receiver.
