Trans instruments ELECTROLYZER Manuel utilisateur

4,1,4,1,2,3,2,3

OPERATION MANUAL

ELECTROLYZER 2i

A powerful tool to demonstrate

purity

of Reverse Osmosis water

TRODUCTION

The ELECTROLYZER is specially designed as a

powerful visual demonstration tool to compare R.O.

purified water and untreated water through the

precipitation of solid*, making it the easiest way to

explain the unseen dissolved solid in portable water.

(Note: *Test results do not suggest that untreated water were

unsafe for consumption)

IMPORTANT:

READ WARNING INSTRUCTIONS

BEFORE USE

SIMPLE OPERATION

1. After unpacking the unit, use a dry cloth to wipe off

the layer of protective oil on each of the electrode.

2. Screw in each electrode on the base of the unit

according to the fitting screw size.

3. Fill a glass with tap water and another with R.O.

purified water.

4. Ensure that the switch is OFF and dip two of the

electrodes in each glass of water.

5. Plug the power plug into the A/C socket than

switch ON the unit.

6. The switch will light up. The untreated water will

gradually boil and solid precipitated; while the R.O.

water will remain crystal clear and cool.

7. Switch OFF the unit once the result is shown.

8. Unplug from the power socket then wipe-dry the

electrodes before storing away.

9. A thin layer of oil applied on the electrodes would

prevent rust developing on it.

SIMPLE MAINTENANCE

1. After several uses, rust may develop on two of the

electrodes. Use sandpaper to remove the rust.

Replacement electrodes are also available from

your supplier.

2. If the fuse were blown due to high TDS in water,

replace the fuse with only 3 Amp fuses.

Always remember to unplug unit from A/C socket

while making maintenance.

ELECTRODES

Unscrew by turning anti-clockwise

for electrode replacements

FUSE HOLDER

Unscrew by turning

anti-clockwise for fuse

replacements.

Use only 3A fuse

ON/OFF SWICH

POWER PLUG

**WARNING

THIS IS A HIGH VOLTAGE DEVICE.

USE WITH EXTRA CAUTION

♦Never leave the unit unattended while it is

connected to the power socket.

♦Never touch electrodes or place them on the

table while the unit is connected to the power

socket.

♦Never leave the unit ON for more than 5

minutes.

♦Do not test water with TDS exceeding 300ppm.

Dilute water with R.O. water first.

♦

Do not use fuse above 3 Amp. This is to

protect the electrical circuit.

** Personal injuries may result if user does not take all

necessary precautions.

** The manufacturer is not responsible for any injuries, which

may result from the use of the product.

MADE IN SINGAPORE

REV-4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Trans instruments Instrument de mesure

Trans instruments

Trans instruments BP3001 Manuel utilisateur

Trans instruments

Trans instruments RBX0010 Manuel utilisateur

Trans instruments

Trans instruments RSA0100 Manuel utilisateur

Trans instruments

Trans instruments KoiMedicPro Manuel utilisateur

Trans instruments

Trans instruments AquaCOMBO HM3070 Manuel utilisateur

Trans instruments

Trans instruments RW0025 Manuel utilisateur

Trans instruments

Trans instruments Marine Salt Testa Manuel utilisateur

Trans instruments

Trans instruments WalkLAB HP 9010 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur