AC Power Capacity
Safety and performance dictate a quality installation with high performance components
and accessories. Install Truck Series Units “out-of-sight” and keep control with a remote.
SERIES II
T2012 - T2512 - T3012
Delivering up to 3000 watts,
Series II sets the industry
standard for power, perfor-
mance and programmable
features. The built-in 3 stage
charger and 30 amp transfer switch is
standard. This larger capacity lets you run
many loads at the same time. The RC7 full function
remote can adjust all programmable settings plus ac-
cesses the built-in Battery Fuel Gauge. The fuel gauge
monitors the battery and reads in bar graph, % full or time
remaining. It also gives time left to recharge when in
charge mode.
Accessories
All the Power You Need
With models from 600 watts to 3 kilowatts, there is a unit
for any budget. The Truck Series is designed to run
serious loads like motors and microwaves. Most models
can surge up to three times rated output for starting
punch. In overload, they can deliver twice their rated
power for up to five minutes, allowing several jobs at the
same time without nuisance shut downs.
Save Your Battery
Deep discharge of your battery can leave you
stranded, and it’s the number one cause of expensive
battery replacement. The Truck Series has battery
protection which shuts down the AC output before your
battery voltage is dangerously low. So you always have
cranking power.
Transparent Connection to “Shore Power”
Whether it’s an extension cord run to the shop or a plaza
hook-up, more and more locations offer the ability to
hook up to “shore power”. The Truck Series has a built-in
30 amp transfer switch so you can plug in and every-
thing keeps running automatically. The transfer feature
meets all UL and NEC safety code requirements.
Trace Fuse Blocks offer protection
and code compliance for your
DC installation. 110, 200, 300 and
400 amp available.
SERIES I
T6112 - T1112 - T1412
Series I is intended to deliver a
tough no-nonsense machine
for tight spots and lots of
power. Perfect for under-bunk
installation and ready to hard-wire
to an AC outlet or power strip, these
units pack enough power to run most
accessories. The optional 3 stage built-in charger can
crank batteries back to full within hours (and comes
with a built-in 30 amp transfer switch). The optional
RC8 remote control means you can bury the unit and
still control it from the dashboard or living area.
RC8 Remote Control For Series I
On/Off switch and LED status/fault indicators
RC6 Remote Control For Series II
On/Off control, LEDs give DC voltage/charging current and status
lights
RC7 Full Function Programmable Remote For Series II
Backlit LCD screen gives full function programmability including
all inverter and charger set points as well as Battery Fuel Gauge.
Solid Red
Blinking Slow
Blinking Fast
Inverting or Charging
Search Mode
Error
Inverter Status
Push
On/Off
RC8
REMOTE CONTROL
RC7 Remote RC8 Remote
Menu Item
Setup
Meter
Inverter On / Off Settings
Inverter
Charge
Batt Full
Error
REMOTE CONTROL
RC7
