TP-Link TL-PS310U Manuel utilisateur
TL-PS310U
Single USB 2.0 Port MFP and Storage Server
Rev: 2.0.0
1910010313
Contents
Chapter 1 Introduction......................................................................................... 1
1.1 Product Overview...........................................................................................................1
1.2 Network Management....................................................................................................1
1.3 Components and Features.............................................................................................1
1.4 Hardware Installation......................................................................................................1
Chapter 2 Software Installation........................................................................... 3
2.1 For Windows 2000/XP Users .........................................................................................3
2.2 For Windows 7 Users...................................................................................................13
Chapter 3 WEB Management Interface............................................................. 18
3.1 For Windows 2000/XP and Windows 7 Users..............................................................18
3.2 WEB Page Description.................................................................................................19
Chapter 4 Troubleshooting................................................................................ 25
4.1 Frequently Asked Questions........................................................................................25
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright © 2010 TP-LINK TECHNOLOGIES CO., LTD. All rights
reserved.
http://www.tp-link.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
¾Reorient or relocate the receiving antenna.
¾Increase the separation between the equipment and receiver.
¾Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
¾Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
1
Chapter 1 Introduction
1.1 Product Overview
MFP and Storage Server enhances capability by letting you place your USB devices at convenient
locations directly on the Ethernet network. It’s designed to connect your USB printers, MFP, and
USB storage devices to your network, allowing all network users access to these USB devices
remotely.
1.2 Network Management
MFP and Storage Server supports the WEB management, which remote management and a
warning. A standard WEB server is permanent on its MFP and Storage Server. Any standard WEB
browser can be used to access and manage the MFP and Storage Server.
1.3 Components and Features
¾1-USB 2.0 Port MFP and Storage Server
¾1 USB 2.0 port (High-speed)
¾Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX
¾LINK LED to indicate network connection, 100M LED to indicate 100M connection, USB LED
to indicate USB status
¾One Setup CD for Windows 2000/XP/Vista/7, and User’s Guide
¾One power adapter
¾Built-in Reset Button
Before you start, you should prepare:
zOne Windows 2000/XP/Vista/7 computer with CD-ROM drive
zOne USB device with USB port
1.4 Hardware Installation
Make sure that your USB devices are switched off and that the MFP and Storage Server’s power
adapter is disconnected.
1. Connect your USB device to the USB port of the MFP and Storage Server.
2
2. Connect the MFP and Storage Server to the router or switch/HUB with the Ethernet cable.
3. Connect the power adapter to the MFP and Storage Server. When the LINK LED lights up, the
MFP and Storage Server is correctly connected to the network.
3
Chapter 2 Software Installation
2.1 For Windows 2000/XP Users
1. Insert the setup CD into your CD-drive. The auto-run program will be started. Select the model.
2. Choose your operating system to install all software programs.
4
3. When the installation completed, click Finish to close the installation wizard.
4. Choose “Yes, I want to restart my computer now.” to restart your computer.
5. After rebooting, you will see a new icon on your desktop. Double-click the icon and it will bring
up the MFP and Storage Server setup utility.
5
6. The setup utility will show up and display all the active MFP and Storage Servers on your
network. In the screen, you will see the product listed as “TL-PS310U-C7641B (192.168.0.10)”.
“C7641B” is the last 6 digits of the MFP and Storage Server’s MAC address, and the
“192.168.0.10” is the MFP and Storage Server’s default IP address.
7. If your computer is not in the 192.168.0.X network segment, it will tell you the TL-PS310U is in
different network segment. In this situation, you need to change the IP of TL-PS310U. Select
the print server, right-click on it and select “Server Configurations”.
6
8. Configure the IP address of the print server according to your network (take 192.168.1.93 for
example). And then click Set. And then click Restart Server to make the change take effect.
9. Then you will see the IP address of the print server has been changed.
Autres manuels pour TL-PS310U
4
Table des matières
Autres manuels TP-Link Serveur de stockage réseau
Manuels Serveur de stockage réseau populaires d'autres marques
HP
HP NetStorage 6000 Manuel utilisateur
Seagate
Seagate U10 ST320423A Manuel utilisateur
Synology
Synology RackStation RS816 Manuel
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manuel utilisateur
Avid Technology
Avid Technology VideoRAID ST Guide de sécurité
Western Digital
Western Digital My Cloud Home Duo Manuel utilisateur
PrimeArray
PrimeArray 4xxx Manuel utilisateur
Buffalo
Buffalo TeraStation WSS WSH5010N6 Manuel utilisateur
Planex
Planex MZK-NAS01SG Manuel utilisateur
Intel
Intel SS4000-E - Entry Storage System NAS Server Manuel utilisateur
Synology
Synology RS2212+ Manuel utilisateur
Allnet
Allnet ALL69000 Manuel utilisateur
