TP-Link Archer AX53 Manuel utilisateur

Power On/Off

ResetPower

LAN1WAN

Reset

WPS/Wi-Fi

LAN2 LAN3 LAN4 Power

TP-Link Archer AX53 and AX55

Router

This router can be mounted on a wall or placed on a shelf/desk.

Backpanel

Get to know your router!

Connect power-

adapter here

(12V/1,5A).

USB 2.0 port

(not available on

AX53)

connect USB-devices.

Internet-port

Connect to berconverter/

cablemodem using at least a

1m long ethernetcable.

WPS/Wi-button

Press to activate WPS.

Press and hold for more

than 2 sec to turn wi on/o󰀨.

On/o󰀨-

button

Turns the

router on/o󰀨.

Ethernet-ports

Connect a computer or

other devices to your

router.

Reset-button

Resets router to

default factory

settings.

After a reset, the

router needs to be

re-installed.

TP-Link Archer AX53 and AX55

Troubleshooting

When the router has power and access to internet the lights might look

like the image above. If anthing is connected to the ethernet-ports,

the ETHERNET-light will be on. Same with the USB-light.

Troubleshoot using lights

POWER 2.4GHz 5GHz ETHERNET

INTERNET USB

2.4 GHz is on when the 2.4 GHz

wireless band is enabled.

5 GHz is on when the 5 GHz

wireless band is enabled.

INTERNET is blue when

internet-service is available.

ETHERNET is on when at least

one device that is turned on is

connected to the LAN-ports.

POWER blinks slowly when the

router is starting up or being up-

dated. Do not turn o󰀨 your router.

POWER blinking quickly means a

WPS-connection is in progress.

When POWER is o󰀨 the router is

powered o󰀨. USB is blinking when USB-device

is being identied.

USB is on when the

connected USB-device is ready to

use.

On our router there are six lights. If you’re experiencing problems the

lights are a good place to start your troubleshooting.

Power On/Off

ResetPower

LAN1WAN

Reset

WPS/Wi-Fi

LAN2 LAN3 LAN4 Power

Easy troubleshooting

1. Restart your router by turning it o󰀨 using the power-button, waiting

5 sec and turning it on again.

2. Troubleshoot using the routers lights using the guide seen above

(check your berconverter or cablemodem too).

3. Problems with wi: try connecting an ethernet cable from the router

to your computer. If this xes the problem something is wrong with the

wireless network. A common reason for this is that wi has

been turned o󰀨 using the wi-button. Or that something in the routers

surroundings or a close neighbour’s wi is interfering with the signal.

4. If the problems remain, try bypassing the router (if you have a

cablemodem your need to release your IP-address, contact us and

we’ll help you). Use the ethernet cable between your router and

berconverter/cablemodem. Instead of having your router connected,

connect a computer instead. Restart the computer. If internet works

now the problem is in your router.

INTERNET is orange when the

router’s internet-port is connected

but no internet service is available.

TP-Link Archer AX53 and AX55

Connect our router

Connect using cable

Wireless internet (Wi)

It’s recommended to use a cable connection if you for example play games online.

Router

Fiberconverter/

Cablemodem

Computer/Game-

consol/TV etc.

Ethernet-port

Router

Fiberconverter/

Cablemodem

Don’t place the router somewhere that might have a

negative impact on the wireless range, read more here.

• If you have a cablemodem you need to release your IP-address

before changing router. Read more here.

• Keep the routers software updated. You should update your router

yearly to ensure it’s secure.

• The routers wireless range can be a󰀨ected by many di󰀨erent

things. The most common one is the placement; if there are thick

walls or it’s placed near devices with electromagnetic radiation it

might have a negative e󰀨ect on the routers range.

Important to think about

At Lyssna-Njut Fibernät AB you can choose to buy your router with

basic conguration, ready to use right away. Without the basic

installation the router must be installed and updated before you can

use it (read more at tp-link.com).

Computer

Click the network icon on your computer

desktop, choose your network and enter

your password (network-id and password

is located on the backside of the router). To

not have to connect manually everytime,

enable ”Connect automatically”.

Smart devices (mobile, tablet etc.)

Go to settings and turn on wi. Choose

your network and enter your password.

TP-Link Archer AX53 and AX55

WPS-connection

Windows computer:

Connect like you would when using wi, but instead of entering the

password press the WPS-button to connect.

Printer, mediaplayer etc:

On the device you want to connect – press the WPS button. Press the

WPS-button on the router to connect.

Don’t hold down the WPS-button for more than 2 sec,

that turns o󰀨 the wireless network.

WPS easily connects devices to your router (WPS does not work with

iOS-devices). To connect devices with WPS to your router, press the

WPS button. The POWER-light is blinking when connection is in

progress. A connection must be made within 2 minutes.

Connect using WPS

Android device:

Go to Network connections Wi. On some devices the option for

WPS Push is in the menu, if not click the three dots in the top right

corner and click advanced to go to WPS Push. Press the WPS-button

on the router to connect your device.

Blå: Pantone 7687C

Röd: Pantone 1925C

Autres manuels pour Archer AX53

Ce manuel convient aux modèles suivants

Autres manuels TP-Link Routeur réseau

TP-Link

TP-Link RE210 Manuel utilisateur

TP-Link

TP-Link TD-W8901G - VERSION 1.0.4 Manuel utilisateur

TP-Link

TP-Link Archer C2 Manuel utilisateur

TP-Link

TP-Link TL-R4299G Manuel utilisateur

TP-Link

TP-Link ARCHER C3150 Manuel utilisateur

TP-Link

TP-Link TD-W8961N Manuel utilisateur

TP-Link

TP-Link SafeStream TL-R480T+ Manuel utilisateur

TP-Link

TP-Link TL-R470T Plus Manuel utilisateur

TP-Link

TP-Link TL-SG2424 Manuel utilisateur

TP-Link

TP-Link EC330-G5u Manuel utilisateur

TP-Link

TP-Link TD-W8961ND Manuel utilisateur

TP-Link

TP-Link Archer VR600v Manuel utilisateur

TP-Link

TP-Link Archer C2 Manuel utilisateur

TP-Link

TP-Link TD-8816 Manuel utilisateur

TP-Link

TP-Link TD-W9970 Manuel utilisateur

TP-Link

TP-Link Archer AX10000 Manuel utilisateur

TP-Link

TP-Link Archer C5400X Manuel utilisateur

TP-Link

TP-Link TL- WR740N Manuel utilisateur

TP-Link

TP-Link Archer A9 Manuel utilisateur

TP-Link

TP-Link TL-R402M Manuel

TP-Link

TP-Link Archer C7 AC1750 Manuel utilisateur

TP-Link

TP-Link Archer AXE200 Omni V1 Manuel utilisateur

TP-Link

TP-Link TL-ER604W Manuel utilisateur

TP-Link

TP-Link RE355 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur