TP-Link RE450 Manuel utilisateur
Quick Installation
Guide
• English
• Français
AC1750 Wi-Fi Range Extender
TP-LINK TECHNOLOGIES CO., LTD.
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
www.tp-link.com
7106506455 REV1.1.0
CONTENTS
01 / English
08 / Français
English
1
Button Explanation
LED button: Press the LED button to turn on or off all the LEDs.
Power button: Press the Power button to turn on or off the extender.
Two easy setup options:
Option ONE: Using a Web Browser
Option TWO: Using WPS (Wi-Fi Protected Setup)
LED Explanation
(RE)
Solid Blue: The extender is connected to the router,
and is in a good location.
Solid Red: The extender is connected to the router,
but too far away from the router.
Blinking: WPS connection is in progress.
Off: No active connection.
2.4GHz/5GHz
On: The extender is connected to both 2.4GHz and
5GHz Wi-Fi bands of your host router.
Off: No connection.
Power
On/Off: The extender is on/off.
Blinking: The extender is initializing.
English
2
1 Power on
Plug the extender into an electrical outlet near your
router, and wait until the Power LED is lit and solid blue.
2 Login
① Disconnect the Ethernet (wired) connection
of your computer. Click the Wi-Fi icon on the
taskbar and connect to the extender's network :
TP-LINK_Extender_2.4GHz/5GHz.
Connections are available
Not connected
Wireless Network Connection
Connect automatically Connect
TP-LINK_Extender_2.4GHz/5GHz
√
② Launch a web browser and type
http://tplinkrepeater.net in the address field. Use
admin (all lowercase) for both Username and Password
to log in.
Option ONE：Using a Web Browser
English
3
If the login window does not pop up, please refer to the
FAQ > Q1.
3 Configure
① Create an account for secure management purpose,
then click Con rm.
② Select your router's 2.4GHz and 5GHz host network,
enter the password, and then click Next.
Next
Please select 2.4GHz Host network or skip this network.
SSID Signal MAC Address Security
Your router wireless name 30:B5:C1:33:99:76
Host 2.4GHz Password:
TP_LINK_123456 23:B5:C0:30:90:06
Exit Other... Rescan Skip
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
If your router does not support 5GHz wireless network,
please click Skip to continue.
③ Either keep the default SSIDs or customize them for the
extended networks, then click Next.
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID: Your network name Copy Host SSID
Hide SSID broadcast
Note: The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID: Your network name_5G Copy Host SSID
Hide SSID broadcast
Note: The extended 5GHz password is the same as your Host password.
Back Next
English
4
④ Verify your wireless settings and click Save. The
Corresponding LEDs ( and ) should turn on
and stay solid, indicating successful connections.
4 Relocate
① Plug the extender into an electrical outlet about halfway
between your router (Host Network) and the Wi-Fi dead
zone.
② Wait until the LED is lit and solid blue. If not,
relocate the extender closer to the router to achieve
better signal quality.
Extended Network
Host Network
Host Network
Ideal extender Placement
Red
Too far away
Blue
Ideal location
Enjoy!
The extended networks share the same Wi-Fi
passwords as those of the host networks, but may have
different wireless network names if you have customized
them during the configuration.
English
5
1 Power on
Plug the extender into an electrical outlet near your
router, and wait until the Power LED is lit and solid blue.
2 Connect
① Press the WPS button on your router, and then press
the button on the extender within 2 minutes.
WPS Press
The LED should change from blinking to a solid
state, indicating a successful WPS connection. If not,
please use Option ONE.
Some ISP gateways disable the WPS function by default. If
the WPS method fails, please use Option ONE.
② If you are connecting to a dual-band router, but only
or LED is on, please repeat step to
connect the other band.
3 Relocate
① Plug the extender into an electrical outlet about halfway
between your router (Host Network) and the Wi-Fi dead
zone.
Option TWO：Using WPS (Wi-Fi Protected Setup)
Please use Option ONE if your router does not support WPS.
English
6
② Wait until the LED is lit with a solid blue. If not,
relocate the extender closer to the router to achieve
better signal quality.
Extended Network
Host Network
Host Network
Ideal extender Placement
Red
Too far away
Blue
Ideal location
Enjoy!
The extended networks share the same SSIDs (network
names) and passwords as those of your host networks.
Entertainment Adapter
The extender can be used as a wireless adapter to connect
any Ethernet-only device such as a Blu-ray player, game
console, DVR, or smart TV to your Wi-Fi network.
First, connect the extender to your router using Option ONE
or Option TWO, and then connect the extender to your
Ethernet-only device via an Ethernet cable.
Smart TV Game Console Desktop
Router
Frequently Asked Questions (FAQ)
Q1. What should I do if I cannot access the extender’s
web management page?
A1. Make sure your computer is connected to the extended
network or connect your computer to the extender
using an Ethernet cable.
A2. Make sure your computer is set to obtain an IP address
and DNS server address automatically.
A3. Verify that http://tplinkrepeater.net is correctly entered
in the web browser and press Enter.
Q2. What should I do when I cannot configure the
extender via WPS?
A. Some dual-band routers may have trouble connecting
to the extender via WPS. If you are experiencing
connection issues, we recommend that you use the
extender's web management page.
English
7
Q3. What should I do if the LED does not change
to solid after completing Option ONE?
A1. You may have entered the incorrect Wi-Fi password of
your host network during the configuration. Please log
into the extender's web management page to check
the password and try again.
A2. Please reset the extender and go through the
configuration again.
Q4. How do I restore the extender to its factory default
settings?
A. With the extender powered on, press and hold the
Reset button until all the LEDs turn on momentarily.
Français
8
Signication des boutons
Bouton DEL : Appuyez sur le bouton DEL pour allumer ou éteindre toutes les DEL.
Bouton d'alimentation : Appuyez sur le bouton Alimentation pour allumer ou éteindre l'extenseur.
Deux options de conguration facile :
Option UNE : Par le navigateur Web
Option DEUX : Par WPS (Wi-Fi Protected Setup)
Signication de l'éclairage de la DEL
(RE)
Bleu xe : L'extenseur est connecté au routeur et
bien placé.
Rouge xe : L'extenseur est bien connecté mais
trop loin du routeur.
Clignotante : Connexion WPS en cours.
Éteint : Aucune connexion active.
2,4 GHz/5 GHz
Fixe : L'extenseur est connecté aux deux bandes
Wi-Fi 2,4 GHz et 5 GHz de votre réseau hôte.
Éteint : Aucune connexion.
Alimentation
Marche/Arrêt : L'adaptateur est allumé/éteint.
Clignotante : L'extenseur est en cours d'initialisation.
Autres manuels pour RE450
9
Table des matières
Langues :
Autres manuels TP-Link Extenseur
TP-Link
TP-Link RE190 Manuel utilisateur
TP-Link
TP-Link TL-WA850RE Manuel utilisateur
TP-Link
TP-Link RE210 Manuel utilisateur
TP-Link
TP-Link RE305 Manuel utilisateur
TP-Link
TP-Link Archer Air E5 Manuel utilisateur
TP-Link
TP-Link WA850RE Manuel utilisateur
TP-Link
TP-Link TL-WPA4220 TKIT Manuel utilisateur
TP-Link
TP-Link TL-WPA8630P Manuel utilisateur
TP-Link
TP-Link TL-WA855RE Manuel utilisateur
TP-Link
TP-Link TL-WA854RE Manuel utilisateur
TP-Link
TP-Link TL-WA730RE Manuel utilisateur
TP-Link
TP-Link TL-WPA8630KIT Manuel utilisateur
TP-Link
TP-Link RE190 Manuel utilisateur
TP-Link
TP-Link RE580D Manuel utilisateur
TP-Link
TP-Link RE205 Manuel utilisateur
TP-Link
TP-Link RE450 Manuel utilisateur
TP-Link
TP-Link TL-WPA4226 KIT Manuel utilisateur
TP-Link
TP-Link TL-WPA2220 Manuel utilisateur
TP-Link
TP-Link TL-WPA4220 TKIT Manuel utilisateur
TP-Link
TP-Link TL-WA850RE Manuel utilisateur
