TP-Link KC100 Manuel utilisateur
User Guide
Kasa Smart Spot
1910012503 REV2.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Camera·············································· 4
Authentication·························································· 5
1
About This Guide
This guide provides a brief introduction to the Kasa Cam and the Kasa app, as well as regulatory information.
Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and
internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
2
Introduction
With the Kasa Smart Spot connected to your home network, you can see what happens in your home even when you're away. This keeps your home
safe and give yourself a little peace of mind — all while seeing every detail on your phone.
You can set up and use your Kasa Smart Spot alone, or use it together with other smart home devices including plugs, bulbs, switches and more. All
these can be achieved on the Kasa app, which provides:
• Simple Setup - Easily connects your camera to your home network and place it almost anywhere.
• Live Video and Two-Way Audio - View 1080P full HD video and connect with your family instantly from anywhere at any time with your phone.
• Free Cloud Storage – Record up to two days of video activity per camera at no cost and save favorite moments to your phone. Upgrade options
available.
• Activity Detection – Immediately alert you whenever it detects motion, keeping you and your family aware of what's going on.
3
Appearance
Kasa Smart Spot has a system LED that changes color according to its status, a microphone, a speaker, a power cord interface,and a RESET button.
See the explanation below:
RESET Button
• Press and hold for 3 to 15 seconds:
Reset to SoftAP mode
• Press and hold for over 15 seconds:
Reset to Factory mode
System LED
• Solid amber:
Rebooting
• Alternating amber and green:
SoftAP Mode
• Flashing red:
Connecting to Wi-Fi
• Flashing green:
Connected to Wi-Fi
• Solid green:
Bound to Cloud
• Flashing amber:
Resetting to SoftAP/Factory mode
Speaker
The sound comes
out of the camera.
Microphone
Built-in internal microphone.
Note: Do NOT insert objects into the hole.
Power Cord Interface
Connect the power
cord provided.
4
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Kasa
Get the Kasa for Mobile app from the Apple
App Store or Google Play, or by scanning the
QR code below.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Start Setup
Tap the button in the Kasa app and select
Kasa Smart Spot. Follow app instructions
to configure your camera and add it to your
home network.
5
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product
names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or
adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
6
FCC compliance information statement
Product Name: Kasa Smart Spot
Model Number: KC100
Component Name Model FCC Identier number
AC ADAPTER NBS05B050100VUU NA
Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
7
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2018-11-14
8
FCC compliance information statement
Product Name: AC ADAPTER
Model Number: NBS05B050100VUU
Responsible Party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2018-11-14
Table des matières
Autres manuels TP-Link Appareil photo numérique
TP-Link
TP-Link Cloud Camera Manuel de l'opérateur
TP-Link
TP-Link Tapo Camera Manuel utilisateur
TP-Link
TP-Link Tapo Smart C720 Manuel utilisateur
TP-Link
TP-Link Kasa Cam Outdoor Manuel utilisateur
TP-Link
TP-Link Tapo Smart Hub Manuel utilisateur
TP-Link
TP-Link Tapo C320WS Manuel utilisateur
TP-Link
TP-Link Tapo C400S2 Manuel utilisateur
TP-Link
TP-Link Kasa Cam Outdoor KC200 Manuel utilisateur
TP-Link
TP-Link Tapo C720 Manuel utilisateur
TP-Link
TP-Link Kasa Spot Pan Tilt KC110 Manuel utilisateur
