1.Power On: Once on power all indicators will light up for 1 second.
2.Standby mode: LED indicator will show “00:00”, other light indicators will be off.
3.Function Selections: Turn the rotary knob to choose the desired function, the chosen function light
indicator will blink and the LED indicator will show “0:00”.
4.During Operation: The chosen function indicator will stay on, the LED indicator will show the
current temperature of the food and will change to indicate heating up. Once it reaches 100°C the
display will change to countdown timing. The first number (in red) indicate the current speed using
and the last 3 digits indicate the countdown timer.
5.After Operation: Once the food is ready, the LED indicator will show “END”.
6.Error Mode: If any error happens, the LED indicator will show an Error code.
7.Start/Cancel button:
Start/Cancel Function: During standby mode, pressing the Start/Cancel button will not have any
effect.
Only during the selection function operating time, press Start/Cancel button to stop all operation and
back to standby mode. All functions are unable to change during operation only Start/Cancel button
can be activated.
·Setting Preset mode: Default timer is 10 mins indicator shows “0:10”, preset button light will blink
and the selection function light will be on. Turn the rotary knob clockwise or anti-clockwise to
increase or decrease the timer by 10 mins per turn. Preset timer is from 0:10 up to 9:50, after 9:50 it
will go back to 0:10.
·During Preset mode: LED indicator will show the timer, timer countdown by 1 min. Preset button and
function button will be lit up.
11.Speed Function: On Standby mode, press the speed button, turn the rotary knob clockwise or
anti-clockwise to change the speed from 1 – H. The first Red digit from the LED indicator is the
current speed chosen.
12.Timer Function: On Standby mode, press the Timer function, turn the rotary knob to change the
operating timing. Turn rotary knob in clockwise or anti-clockwise direction to change the timer by 5
sec per turn. Timer range from 0:05 to 6:00, maximum timer to blend is 6 mins.
13.Procedure for Speed and Timer:
·Only can be set on standby mode.
·These two functions can be use at the same time, press either one function first and adjust the
desire time and speed. No definite sequence for both settings.
·Once setting is done, press the Start/Cancel button to start the operation.
·After setting the timer & speed if Start/Cancel button is not pressed after 10 secs it will go back to
standby mode.
Operating procedure
1. Cut ingredients into 2cm small cubes. (Fig 1)
2. Using the measuring cup for ingredients depending on your recipes. (Fig 2)
3. Pour all ingredients into the Glass Jug. Make sure there is no other residue in the jug. (Fig 3)
4. Add water or other liquid only up to the maximum level or amount depends on the recipes.
5. Place the lid and lock securely. (It will not work if the cover is not securely lock, an error code
E01 will show). See figure 4 the way to lock the cover.
6. Place the jug onto the blender motor body at the right position. (fig 5 & 6)
7. Once everything is place properly, on the power, there will be a beep sound, all indicator light
will light up for 1 sec and go off with only the LED light show 00:00.
1.Turn the rotary button to selection function in “Soymilk” “ Porridge” “Soup” “Smoothies” “ Juice”
“Milkshake” “Corn J” “Baby food” sequence. After choosing the desire function press the
“Start/Cancel” to active the function. The chosen function light will stay on.
Note: Count down timing will activate for all functions, for selected with heating function it will boil the
food till 100°C and starts to countdown till the process is over. For “Smoothies”, “Juice” and
“Milkshake” it will countdown the process without heating up. After all process, it will have 5 beep
sound and the LED indicator will show “END”.
2.After all process, it will have 5 beep sound and the LED indicator will show “END”. (only by
pressing the Start/Cancel button then it will go back to standby mode).
During the operating process, if there is any current interruption within 30 secs, you may continue
with the process. After more than 30 secs, the blender will go back to standby mode and we suggest
to change the ingredients and restart again.
3.After food is ready, turn off the power and unplug the power point, turn the lid anti-clockwise by the
side lever and push up the lid slowly. (If using heating function, please be aware that the lid and the
blender jar will be hot after cooking. Be aware of the steam release when you lift the lid and
measuring cup. (Fig 7)
4.Pour out the food slowly, add any flavouring and ready to be serve. (Fig 8)
5.Wash the blender after it has cooled down, do not leave the food inside the jug too long as you may
have difficulties in cleaning. After cleaning, wipe with a dry cloth.
6.Clean the Motor body with a cloth and let all parts to dry before keeping in the packaging box or
cabinet. (Do not touch the motor coupling immediately after operating as the area may be still hot)
Note:
1.For cooking porridge, puree, soya bean or sticky food, make sure to choose the right function or it
may cause bad taste, uncooked or burnt to the food. Do not add sugar before or during the cooking
process as it may cause lots of foaming and cause spillage.
2.Press the Start/Cancel button if the wrong function is selected, if the food/ liquid inside is not hot
you may reselect the right function and press Start/Cancel button again. If the food/liquid is still hot
around 70-80°C, let it cool down for few mins then restart again.
3.Amount of food or water may follow according to own recipes. For heating function (hot food), do
not exceed 1400ml (Except for Soya Bean function, do not exceed 1200ml), Fruit Juice, Milkshake or
Smoothies must not exceed 1750ml.
4.For blending vegetables or Fruit juice, make sure to remove the seeds before placing into the jug.
5.Do not use this blender to reheat cooked soya bean, Milk, porridge or sticky food as it may get
burnt and damage the heating element.
6.Do not let the appliance run for more than 5 minutes at a time. Let the appliance cool down to room
temperature before you continue processing.
7.If food is burnt and stuck on the heating element, do not use any metallic or sharp-edged utensils
on the unit to avoid scratching on the surface. The best way is to soak it with some hot water for 2
hours and clean it with the cleaning brush.
Cleaning & Maintenance
1.Please off and unplug the power before cleaning.
2.Do not touch the heating element, motor coupling and blade unit after use. Let it cool down before
cleaning
3.Careful of the sharp blade while washing.
4.Do not use abrasive chemical or alcohol to clean the appliance.
5.Do not use any metallic or sharp-edged utensils to avoid scratching on the surface.
6.Do not immerse the glass jug, motor body or power cord in water.
7.Do not rinse the whole glass jug, motor body under running water. Only fill and rinse the inner glass
jug under running water avoid other parts.
8.After cleaning, wipe with a dry cloth and air dry it.
9.Do not place the appliance under the sun to dry.
10.If there are still some stains, fill in some water into the jug and soak for 1-2 hours, after that
slightly scrub away with the brush.
11.For stubborn stains like limescale or brown patches, you may add some lemon or vinegar and
soak for a while and clean it off with a sponge or brush.
