TOX FinePress ZFS Manuel utilisateur

Original operating instructions

TOX® FinePress

ZFS / ZFL / ZFW

TOX® PRESSOTECHNIK GmbH & Co. KG, Riedstrasse 4, 88250 Weingarten / Germany

www.tox.com

Edition:11/20/2023, Version: 6

Table of contents

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 2

Table of contents

1 Important information

1.1 Legal note ....................................................................................................6

1.2 Exclusion of liability......................................................................................6

1.3 Conformity ...................................................................................................6

1.4 Validity of the document ..............................................................................7

1.4.1 Content and target group.............................................................................7

1.4.2 Other applicable documents ........................................................................7

1.5 Gender note.................................................................................................7

1.6 Displays in the document.............................................................................8

1.6.1 Display of warnings......................................................................................8

1.6.2 Display of general notes ..............................................................................8

1.6.3 Highlighting of texts and images..................................................................9

1.7 Contact and source of supply ....................................................................10

2 Safety

2.1 Basic safety requirements .........................................................................11

2.2 Organizational measures...........................................................................12

2.2.1 Safety requirements for the operating company........................................12

2.2.2 Selection and qualifications of personnel ..................................................13

2.3 Fundamental hazard potential ...................................................................14

2.3.1 Electrical hazards ......................................................................................14

2.3.2 Thermal hazards........................................................................................14

2.3.3 Pneumatic hazards ....................................................................................15

2.3.4 Contusions.................................................................................................15

2.3.5 Hydraulic hazards ......................................................................................15

2.3.6 Electromagnetic hazards ...........................................................................16

2.3.7 Laser..........................................................................................................16

2.3.8 Hazardous substances ..............................................................................16

2.3.9 Noise..........................................................................................................17

2.4 Safety symbols ..........................................................................................18

Table of contents

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 3

3 About this product

3.1 Intended use ..............................................................................................19

3.1.1 Safe and correct operation ........................................................................19

3.1.2 Foreseeable misuse ..................................................................................20

3.1.3 Substances harmful to the wetting properties of lacquers (LABS) ............20

3.2 Product identification .................................................................................20

3.2.1 Type plate ..................................................................................................20

3.3 Product overview and function description ................................................21

4 Technical data

4.1 Type sheet and data sheet ........................................................................22

5 Transport and storage

5.1 Safety during transport ..............................................................................23

5.2 Storage when not in use ............................................................................24

5.3 Transport by lifting device..........................................................................25

5.4 Dispatch for repair .....................................................................................26

6 Installation

6.1 Safety during installation............................................................................27

6.2 Requirements for installation .....................................................................29

6.2.1 Set-up location...........................................................................................29

6.3 Installing accessories.................................................................................30

6.3.1 Installing process monitoring (option) ........................................................30

6.3.2 Installing the ergonomic handle (optional) .................................................31

6.3.3 Installing the stroke counter (optional).......................................................32

6.3.4 Installing the force sensor (optional)..........................................................34

6.3.5 Install the return stroke lock (option)..........................................................36

6.3.6 Installing the slide table (optional) .............................................................38

6.3.7 Installing travel sensor (option)..................................................................39

6.3.8 Installing the tool holding fixture (optional) ................................................40

Table of contents

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 4

7 Commissioning

7.1 Safety during the commissioning...............................................................41

7.1.1 Safety device .............................................................................................41

7.2 Requirements for the commissioning ........................................................42

8 Operation

8.1 Safety in operation.....................................................................................43

8.2 Requirements for operation .......................................................................43

8.3 Process monitoring ....................................................................................43

8.4 Setting the open height of the press head.................................................44

8.5 Fine adjustment of working stroke (option)................................................46

8.6 Setting working depth ................................................................................47

8.7 Resetting the stroke counter (optional)......................................................47

8.8 Adjusting the return stroke lock (optional) .................................................48

8.9 Setting the return stroke ............................................................................51

8.10 Setting the travel sensor (option)...............................................................52

9 Troubleshooting

9.1 Safety during troubleshooting ....................................................................53

9.2 Detecting faults ..........................................................................................54

Maintenance table

10 Maintenance

10.1 General information ...................................................................................56

10.2 Safety during maintenance ........................................................................57

10.3 Requirements for maintenance..................................................................57

10.3.1 Set system to maintenance position ..........................................................57

10.4 TOX® FinePress maintaining .....................................................................58

10.4.1 TOX® FinePress inspecting .......................................................................58

10.4.2 Inspecting the fastening of the press head ................................................59

10.4.3 Inspecting and cleaning movable parts and guides...................................60

Table of contents

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 5

11 Repairs

11.1 Safety during repairs..................................................................................61

12 Disassembly and Disposal

12.1 Safety during disassembly and disposal....................................................62

12.2 Decommissioning ......................................................................................62

12.3 Shutdown...................................................................................................63

12.4 Disassembling ...........................................................................................64

12.5 Disposal .....................................................................................................64

13 Appendices

13.1 Declaration of conformity ...........................................................................65

Index

Important information

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 6

1 Important information

1.1 Legal note

Operating instructions, manuals, technical descriptions and software published

by TOX®PRESSOTECHNIK GmbH & Co. KG ("TOX®PRESSOTECHNIK") are

or edited (e.g. by copying, microfilming, translation, transmission in any elec-

tronic medium or machine-readable form). Any use - including of extracts - con-

trary to this condition is prohibited without approval in writing by TOX®PRES-

SOTECHNIK and may be subject to criminal and civil legal sanctions.

If this manual refers to goods and/or services of third parties, this is for example

only or is a recommendation by TOX®PRESSOTECHNIK. TOX®PRES-

SOTECHNIK does not accept any liability or warranty/guarantee with reference

to the selection, specifications and/or usability of these goods and services. The

use and/or representation of trademarked brands that do not belong to

TOX®PRESSOTECHNIK are for information only; all rights remain the property

of the owner of the trademarked brand.

Operating instructions, manuals, technical descriptions and software are origi-

nally compiled in German.

1.2 Exclusion of liability

TOX®PRESSOTECHNIK has checked the contents of this publication to ensure

that it conforms to the technical properties and specifications of the products or

plant and the description of the software. However, discrepancies may still be

present, so we cannot guarantee complete accuracy. The supplier documenta-

tion included with the system documentation is an exception.

However, the information in this publication is checked regularly and any re-

quired corrections are included in subsequent editions. We are grateful for any

corrections and suggestions for improvement. TOX®PRESSOTECHNIK re-

serves the right to revise the technical specifications of the products or plant

and/or the software or documentation without prior notice.

1.3 Conformity

The product is compliant with EU guidelines.

See separate Declaration of conformity or installation declaration.

Important information

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 7

1.4 Validity of the document

1.4.1 Content and target group

This manual contains information and instructions for the safe operation and

safe maintenance or servicing of the product.

All information in this manual is up to date at the time of print. TOX®PRES-

SOTECHNIK reserves the right to make technical changes that improve the

system or increase the standard of safety.

The information is intended for the operating company as well as operating

and service personnel.

1.4.2 Other applicable documents

In addition to the available manual, further documents can be supplied. These

documents must also be complied with. Other applicable documents can be, for

example:

additional operating manuals (e.g. of components or of a whole system)

Supplier documentation

Instructions, such as software manual, etc.

Technical data sheets

Safety data sheets

Data sheets

Schematics

1.5 Gender note

In order to enhance readability, references to persons that also relate to all

sexes are normally only stated in the usual form in German or in the corre-

sponding translated language in this manual, thus e.g. "operator" (singular) for

male or female, or "operators" (plural) for male or female". This should in no

way convey any gender discrimination or any violation of the principle of equal-

ity, however.

Important information

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 8

1.6 Displays in the document

1.6.1 Display of warnings

Warning signs indicate potential dangers and describe protective measures.

Warning signs precede the instructions for which they are applicable.

Warning signs concerning personal injuries

DANGER

Identifies an immediate danger!

Death or severe injuries will occur if appropriate safety measures are not taken.

èMeasures for remedial action and protection.

WARNING

Identifies a potentially dangerous situation!

Death or serious injury may occur if appropriate safety measures are not taken.

èMeasures for remedial action and protection.

CAUTION

Identifies a potentially dangerous situation!

Injury may occur if appropriate safety measures are not taken.

èMeasures for remedial action and protection.

Warning signs indicating potential damage

NOTE

Identifies a potentially dangerous situation!

Property damage may occur if appropriate safety measures are not taken.

èMeasures for remedial action and protection.

1.6.2 Display of general notes

General notes show information on the product or the described action steps.

Important information

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 9

Identifies important information and tips for users.

1.6.3 Highlighting of texts and images

The highlighting of texts facilitates orientation in the document.

üIdentifies prerequisites that must be followed.

1. Action step 1

2. Action step 2: identifies an action step in an operating sequence that must

be followed to ensure trouble-free operation.

wIdentifies the result of an action.

uIdentifies the result of a complete action.

èIdentifies a single action step or several action steps that are not in an oper-

ating sequence.

The highlighting of operating elements and software objects in texts facilitates

distinction and orientation.

<In square brackets> identifies operating elements, such as buttons, levers

and (valves) stopcocks.

''with quotation marks'' identifies software display panels, such as windows,

messages, display panels and values.

In bold identifies software buttons, such as buttons, sliders, checkboxes

and menus.

In bold identifies input fields for entering text and/or numerical values.

Important information

TOX_Manual_FinePress_ZFS-ZFL-ZFW_en 10

1.7 Contact and source of supply

Only use original spare parts or spare parts approved by TOX®PRESSOTECH-

NIK.

TOX®PRESSOTECHNIK GmbH & Co. KG

Riedstraße 4

88250 Weingarten / Germany

Tel. +49 (0) 751/5007-767

E-Mail: [email protected]

For additional information and forms see

www.tox.com

Ce manuel convient aux modèles suivants

Table des matières

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel