The XCAM1080P Series Camera Help Manual
6 XCAM1080P Series Camera Application Configurations
You can use the XCAM1080P series camera in two different ways. Each application requires different hardware
environment.
6.1 Camera Working Standalone with Built-in XCamView Software
Figure 6-1 XCAM1080P Series Camera with the HDMI Displayer
For this application, apart from the microscope, the user only needs an XCAM1080P series camera, an HDMI displayer,
an HDMI cable, an SD card, a USB mouse and a power adapter that come with the camera. The steps to start the camera
are listed as below:
⚫Connect the camera to a HDMI displayer using the HDMI cable;
⚫Insert the supplied USB mouse to the camera’s USB port;
⚫Insert the supplied SD card into the XCAM1080P series camera SD card slot;
⚫Connect power adapter to the camera the and switch it on;
⚫Switch on the displayer and view the video in the XCamView software. Move the mouse to the left, top or
bottom of the XCamView UI, different control panel or UI will pop up and users could operate with the mouse at
ease.
6.2 Connecting camera to the PC with USB Video port
For Windows user (Windows XP (32bit), Windows 7/8/10 (32/64 bit) ), please use ToupView.
For macOS and Linux user (macOS 10.10 or above or Linux distributions with kernel 2.6.27 or higher), please use
ToupLite.
The steps to start the camera are listed below:
⚫Install the ToupView/ToupLite on your PC;
⚫Connect power adapter to the camera the and switch it on. After starting the camera, plug one end of the USB
cable into the USB 2.0 Video port of the XCAM1080P series camera, and plug the other end into the USB port of
the PC;
⚫Open ToupView/ToupLite software. The XCAM1080P series camera will be recognized automatically by
software. In ToupView/ToupLite software, select the corresponding XCAM1080P series camera by clicking the
camera name in the camera list.
Note:
When the USB cable and the mouse are plugged into the camera at the same time, the USB cable is preferred and the
mouse is not available; when the USB cable is unplugged, the mouse can be used normally.
