Touchboards TBC-VC-3000 Manuel utilisateur
_________________________________________________________________________________________________________________
TBC-VC -3000
Refer to earlier content on testing Camera through computer settings or Social Platforms.
Basic Setup
Plug in Power Cable and USb cable.
Audio out
Additional Microphone. HDMI USB Control cable Ports (Ie:Control from Crestron, Kramer etc..) Power.
_________________________________________________________________________________________________________________
Camera Menu
SerialPort Settings:- To use with Control devices, check Baud Rates. Serial Codes available
on request.
PTZ Settings:-
DZoom:- Optional Zoom. The Camera has Optical Zoom which will show the Image as a lot clearer when zoomed in.
Focus Mode:- Choose between Auto or Manual.
Remote Speed:- 1 –Camera moves slowest when using arrow keys. 16 –Camera moves Faster when using arrow keys.
_________________________________________________________________________________________________________________
Pan Direction:- Normal –Camera moves same direction as arrow keys. Inverse:- Camera moves opposite direction of arrow keys.
Tilt Direction:- Normal –Camera moves same direction as arrow keys. Inverse:- Camera moves opposite direction of arrow keys.
Flip:- On or Off. When mounting the camera from the Ceiling you will want Flip On.
Mirror:- On or Off.
Voice Tracing: On or Off. If you have a number of speakers at once, It is best to take Voice Tracing/Tracking off.
Voice Delay:- 0seconds –No delay. 9 Seconds Longest Delay.
Speaker Mute: On/Off. Mic Mute:- On/Off.
Exposure Mode:-
AE Mode:- Different Options, best to leave on Auto as best result. If you divert from Auto you may see flickering.
Exposure Compensation: - Adjust accordingly. 8 is the Deafult setting.
Backlight:- On/Off Your Image may be too bright if you switch this On. Change this depending on your environment.
Wb Mode: - White Balance Setting. Default is Auto, you may want to change manually depending on environment.
Picture Settings:-
_________________________________________________________________________________________________________________
3D NR:- This acts as a noise Reduction. 1 is the default channel.
WDR:- Wide Dynamic Range. Default is 0. This option adjusts the Cameras Image Quality under High Contrast lighting.
DeFog:- Changes Image quality in foggy conditions. Default set to 0.
De-Flicker: Adjust accordingly if your image is flickering. Default set to 60Hz.
System Settings
Video Format:- Option to change the resolution, from 720p to 1080p.
Reset Settings:- Press Reset changes everything back to factory Default settings.
Table des matières
Autres manuels Touchboards Système de microphone
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur