Toto Link CP900 Manuel utilisateur
User Guide
Wireless Outdoor CPE
Contents
About This Guide
Introduction
1. Overview
2. LED Indicators
3. Ports and Buttons
4. Passive PoE Box
Easy Setup Guide
1. PC Setttings
2. Web Interface Login
3. Working Modes
1) AP Mode
2) Client Mode
3) Repeater Mode
4) WISP Mode
Hardware Installation
1. Connection and Installation
2. ESD and lightning Protection
FAQ
01
02
02
02
03
04
08
08
09
10
10
14
15
18
05
05
07
22
23
01
About This Guide
This guide contains information for introduction and setup of TOTOLINK Wireless
Outdoor CPE series. Please read this guide carefully before operation.
When using this guide, please notice that feature of the product may vary slightly
depending on your location, language and Internet service provider. All screenshots,
images, parameters and descriptions documented in this guide are used for demonstra-
tions only.
Package Contents：
Please open the Gift-box carefully, it should contain:
◆TOTOLINK CPE *1
◆Passive PoE Box*1
◆24V Power Adapter *1
◆User Guide*1
◆TOTOLINK Flyer *1
◆Ethernet Cable *1
◆Strips *2
If there is any accessories broken or missing, please contact local retailer as soon as
possible.
All the photos and product speci�ications mentioned in this manual are for references
only, as the upgrading of software and hardware. They are subject to change without
notice. No part of the speci�ications may be reproduced in any form or by any means
or used to make any derivative such as translation, transformation, or adaptation without
permission from TOTOLINK. For more information, please visit our website at
http://www.totolink.net
Copyrights © 2017 by TOTOLINK All rights reserved.
Copyright Statement
Introduction
02
TOTOLINK Wireless Outdoor CPEs are designed to provide cost-effective solution for
outdoor long range Wi-Fi coverage. With built-in polarized antennas, high power output
and multiple working modes, TOTOLINK CPEs are used extensively in many
applications. Powered by Passive PoE also makes the network cabling more easy
and �lexibly. Meanwhile, the professional structural design allows them suitable for
any kind of severe environments, an ideal choice for outdoor Wi-Fi transfer over long
distance.
1. Overview
2. LED Indicators
24V PassivePoE
Default Access:
LAN -On：It is lighting when LAN port is
connected without data transfer
-Flashing：It �lashes when LAN port is
connected with data transfer.
POWER(PoE)：It is lighting when the device
gets power.
AP Mode：
all signal strength indicators keep lighting
Client/ Repeater/WISP Modes：
the stronger Wi-Fi signal the device get, the
more indicators lighting.
3. Ports and Buttons
RESETLAN1GND
(POE IN)
RESET
GND LAN1
(POE IN)
GND LAN(POE IN) RESET
03
Description
Press this RESET button for more than 5 seconds, the
device will restored to factory default settings and reboot
automatically.
This RJ45 Port is used to connect PoE box for both power
supply and data transfer.
This GND port is used to connect electrical ground for
ESD and lightning protection.
Ports and Buttons
GND
RESET
LAN（POE IN）
04
POE box POE box
front back
Description
Power indicator, it is lighting when power on
The DC IN socket is where you will connect the power
adapter.
Press the RESET button for more than 5 seconds,
TOTOLINK CPE will restore to factory default settings.
This RJ45 port is used to connect PC for data input
Ports and Buttons
DATA IN
POWER
DC IN
RESET
This RJ45 port is used to connect TOTOLINK CPE for
data and power transfer.
DATA & POWER
OUT
4. Passive PoE Box
05
Hardware Installation
1. Connection and Installation
① Insert a screwdriver into the seam between CPE shell and sliding closure;
② Press down the screwdriver to make the sliding closure slip off.
Step 1. Open the sliding closure on the CPE to plug into the Ethernet cable. This may
not easy because the sliding closure is fasten on in case it will come off when CPE
works outdoors. We recommend you refer to the operations on the below diagram
to make it easier.
Step 2. After the Ethernet cable connection, push up the
sliding closure to make it fasten again on the case.
Step 3. Fix the CPE to the pole by strips, then adjust it to
face the Wi-Fi coverage area(see left-hand side).
POE box
Wall socket
Switch
24VPassive PoE
DefaultAccess:
Connection diagram：
Laptop
Router
06
07
Grounding Method:
Ground wires
GND
Connect CPE’s GND to the earth by wires
2. ESD and lightning Protection
For outdoor devices, it is significant to do the grounding for lightning. If your wireless
CPE has a GND port, please connect the port to the earth terminal of the building by
yellow & green double color line for grounding, see below. Otherwise, we suggest you
use lightning protecon device for signal.
The earth
Table des matières
Autres manuels Toto Link Point d'accès sans fil
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
