TOTALINE CPV220LA Manuel utilisateur

Part Number P374-2200LA

CONTENTS Page

GENERAL ............................................2

CONFIGURATION ....................................3-12

Thermostat Display ....................................3

Heat or Cool Indicator .................................4

Thermostat Front Panel Buttons .........................4

Thermostat Programming Buttons .......................4

Set Clock ............................................7

Programming Thermostat Schedules .....................7

OPERATION ........................................13,14

Auto-Changeover .....................................13

Light Activated Operation ..............................13

Two-Stage Operation ..................................13

Clock Backup ........................................13

Fan Operation .......................................13

Emergency Heat .....................................14

Electric Heat .........................................14

Holiday Mode ........................................14

OWNER’S

MANUAL CPV220LA

Commercial Thermostat

Manufacturer reserves the right to

discontinue, or change at any time,

speciﬁcations or designs without notice

and without incurring obligations.

REPLACEMENTCOMPONENTSDIVISION

RCARRIER CORPORATION 1/98

LITERATURE NUMBER P374-2SO

PRINTED IN CHINA

IMPORTANT: Read entire instructions before programming the

thermostat.

GENERAL

The 7-day, commercial, programmable thermostats are wall-mounted, low-

voltage thermostats which maintain room temperature by controlling the op-

eration of an HVAC (heating, cooling and ventilation) system. Separate heat-

ing and cooling set points and auto-changeover capability allow occupied

and unoccupied programming schedules for energy savings.

All thermostats allow up to 3 occupied and one unoccupied time/

temperature setting to be programmed per 24-hour period. Each thermostat

stores programs for 7 independent days. Batteries are not required. During

power interruption the internal NEVERLOST™ memory stores programs for

an unlimited time.

A light sensor is provided on the thermostat for light activation. When the

sensor detects light (the space is occupied), the thermostat will enter into

Occupied 1 mode. If the room is dark, the thermostat will follow its pro-

grammed schedule.

IMPORTANT: The thermostat has a security option which can be conﬁg-

ured by the installer to limit certain functions of the thermostat such as

changing set points and modifying programming schedules. If the thermo-

stat does not allow modiﬁcation of these functions, call the installer to per-

form desired changes.

CONFIGURATION

Thermostat Display — The thermostat display is located in the center of

the thermostat. See Fig. 1. The following information can be displayed on the

screen:

• mode (OFF, HEAT, COOL, AUTO, or PROGRAM ON)

• fan setting (FAN ON or blank)

• override indication

• room temperature

• desired temperature

• service ﬁlter indicator

• time of day

• day of the week

• schedule period (Occupied 1, 2, or 3; or Unoccupied)

• setup indicator (programming mode)

• lock indicator

• start/stop indicator (schedule period program mode)

Fig. 1 — Thermostat Display

Heat or Cool Indicator — A Heat or Cool indicator is located on the bot-

tom left cover of the thermostat. See Fig. 2. The light will be red if the ther-

mostat is in Heating mode. The light will be green if the thermostat is in

Cooling mode.

Thermostat Front Panel Buttons — The thermostat has buttons on the

front cover which are used to raise or lower the desired set point and override

the current program. See Fig. 2.

SET POINT BUTTONS — The UP ARROW and DOWN ARROW buttons

will raise or lower the current desired temperature set point. If the thermostat

is in AUTO mode, pressing the UP ARROW or DOWN ARROW buttons

will adjust both the heating heating and cooling set points. Pressing the UP

ARROW or DOWN ARROW buttons in Cooling mode will adjust only the

cooling set points. Pressing the UP ARROW or DOWN ARROW buttons in

Heating mode will adjust only the heating set points. The UP ARROW and

DOWN ARROW buttons are also used in programming mode.

OVERRIDE BUTTON — The Override button is used to force the thermo-

stat from Unoccupied mode into the Occupied 1 mode comfort settings. The

Override period will be set at 30 minutes. The thermostat will then return to

Unoccupied mode. To increase the amount of time in Override mode, press

the Override button again. Thirty minutes of override time will be added for

each time the Override button is pressed up to a maximum of 4 hours. After

the 4-hour limit has been reached, press the Override button again to cancel

Override mode.

While in Override mode, the Override icon and the Occupied 1 icon will

be displayed on the thermostat. The time of day and the minutes remaining

in Override mode will alternate on the thermostat display.

The set points are adjustable with the UP ARROW and DOWN ARROW

keys during Override mode.

NOTE: If the thermostat is in Occupied mode and the Override button is

pressed, the thermostat will go into Unoccupied mode immediately. The ther-

mostat will remain in Unoccupied mode until the next Occupied start time.

Thermostat Programming Buttons — The thermostat has program-

ming buttons which are used to change the set points of the thermostat, set

the modes, and program schedules. The programming buttons are accessible

from underneath the thermostat cover. To access the programming buttons,

pull on the hinged thermostat cover. See Fig. 3. The programming buttons

are: Mode, Fan, Holiday, Program, and Set Clock.

Fig. 2 — Thermostat Front Panel Buttons

Fig. 3 — Thermostat Programming Buttons

The UPARROW and DOWN ARROW buttons are used to scroll through

programming set points. The buttons are also used to answer yes or no.

KEYPAD LOCK — The thermostat has a keypad lockout feature which will

not acknowledge front panel buttons until the lockout sequence is entered. To

disable or lock the keypad, press and hold the Mode button. While holding

down the Mode button, press the UP and DOWN ARROW buttons simul-

taneously. The ‘‘Locked’’’ icon will appear on the display.

The thermostat is unlocked by performing the same procedure. Press and

hold the Mode button. While holding down the Mode button, press the UP

and DOWN ARROW buttons simultaneously. The ‘‘Locked’’ icon will be

removed from the display.

FAN BUTTON OPERATION — The Fan button selects fan operation. When

the fan is set to FAN ON, the fan will run continuously for improved air

circulation.

NOTE: When the thermostat is in Unoccupied mode, the fan will run only

during heating or cooling operation, even if the fan is set to FAN ON, this

is the energy-saving smart fan feature.

When the fan is not set to FAN ON (no icon displayed on thermostat screen),

the fan will run during heating and cooling operation only.

MODE BUTTON OPERATION — The Mode button selects the operating

mode of the thermostat. If OFF is selected, the thermostat will not enter Heat-

ing or Cooling mode. If HEAT is selected, the thermostat will only enter

Heating mode (if the room temperature is below the heating set point). If

COOL is selected, the thermostat will only enter Cooling mode (if the room

temperature is above the cooling set point). If AUTO is selected, the ther-

mostat will enter Heating or Cooling mode based on the room temperature

and the heating and cooling set points. If PROGRAM ON is selected, the

stored schedule is enabled and the thermostat will follow the Occupied and

Unoccupied schedules stored in its memory.

Auto-Changeover — When the thermostat mode is set to AUTO, the ther-

mostat will provide automatic changeover from Heating to Cooling mode

and Cooling to Heating mode when required. The thermostat will automati-

cally switch to maintain the desired temperature setting. The thermostat does

not need to be manually changed from heating to cooling or cooling to heat-

ing operation.

NOTE: It is recommended that auto-changeover mode not be used if the out-

door temperature is consistently lower than 50 F (10 C) or greater than 80 F

(27 C). In these cases, select heating or cooling mode only.

HOLIDAY MODE — The Holiday button places the thermostat into Holiday

mode. During Holiday mode, the unoccupied set points are enforced. The

number of days the thermostat will be in Holiday mode can be set.

Set Clock — The Set Clock button allows the user to change the time and

day displayed on the thermostat. Press the Set Clock button to enter Set Time

mode. See Fig. 4. The current time will blink on and off. Press the UPAR-

ROW and DOWN ARROW buttons until the correct time is shown. Hold

down the buttons to quickly move through the time display. The AM and PM

annunciators will automatically change. To scroll through by hours only, press

and hold the Fan button while pressing the UP or DOWN ARROW buttons.

To ensure the schedules are properly followed, make sure that AM or PM is

correct for the time chosen. When the correct time is shown, press the Mode

button to modify the day of the week. The current day will blink on and off.

Press the UP ARROW and DOWN ARROW buttons until the correct day is

shown. Press the Set Clock button again to exit the Set Time mode.

Programming Thermostat Schedules — Before programming the ther-

mostat, plan the thermostat daily schedule. The schedule is divided into

7 days (Monday through Sunday). Each day can have 2 (Occupied 1, Un-

occupied), 3 (Occupied 1, Occupied 2, Unoccupied), or 4 (Occupied 1, Oc-

cupied 2, Occupied 3, Unoccupied) time periods. Each occupied time period

Fig. 4 — Setting the Clock

has a start time, stop time, heating set point, and cooling set point. The un-

occupied time period has a heating set point and a cooling set point. The

unoccupied time period is active whenever an occupied time period is not

active. Fill in Table 1 on page 12 as an aid to programming the daily

schedules.

NOTE: When the sensor detects light (the space is occupied), the thermostat

will enter into Occupied 1 mode. If the room is dark, the thermostat will

follow its programmed schedule. The Occupied 1 schedule should be turned

OFF to keep the thermostat from entering Occupied 1 while the room is un-

occupied. If the Occupied 1 schedule is turned ON, the thermostat will enter

into Occupied 1 per the schedule regardless of light activation. The Occupied

1 set points are used as the heating and cooling set points during light ac-

tivation. The Unoccupied set points should be used as non-work hour set

points (before 8:00 AM and after 5:00 PM) when using light activation. For

times when the building is unoccupied during work hours (Monday through

Friday, 8:00 AM to 5:00 PM), the Occupied 2 schedule should be turned ON,

and can be used for moderate energy savings with set points of 80 F for

cooling and 65 F for heating.

PROGRAMMING MODE — To program the daily schedules, perform the

following procedure:

1. Enter programming mode by pressing the Program button. The Occu-

pied 1 annunciator will appear on the thermostat display. See Fig. 5. Use

the UPARROW and DOWNARROW buttons to set the maximum num-

ber of Occupied periods available. The thermostat can be set to 1, 2, or

3. After the number of Occupied periods has been selected, press the

Mode button.

2. The cooling set point for Occupied 1 will be displayed. Use the UPAR-

ROW and DOWN ARROW buttons to raise or lower the cooling set

point until the desired temperature is shown. The range of acceptable

values is 35 to 99 F (1 to 37 C). Press the Mode button to continue. See

Fig. 5.

3. The heating set point for Occupied 1 will be displayed. Use the UPAR-

ROW and DOWNARROW buttons to raise or lower the heating set point

until the desired temperature is shown. The range of acceptable values

is 35 to 99 F (1 to 37 C). Press the Mode button to continue. See Fig. 5.

4. The cooling set point for Unoccupied will be displayed. Use the UPAR-

ROW and DOWN ARROW buttons to raise or lower the cooling set

point until the desired temperature is shown. The range of acceptable

values is 35 to 99 F (1 to 37 C) or ‘‘OF’’ (no unoccupied cooling). Press

the Mode button to continue.

5. The heating set point for Unoccupied will be displayed. Use the UPAR-

ROW and DOWNARROW buttons to raise or lower the heating set point

until the desired temperature is shown. The range of acceptable values

is 35 to 99 F (1 to 37 C) or ‘‘OF’’ (no unoccupied heating). Press the

Mode button to continue.

6. The day of the week will be shown. Use the UP ARROW and DOWN

ARROW buttons to change the day of the week until the desired starting

day is shown. Possible choices are M (Monday) through S (Sunday).

Press the Mode button when the desired day is shown.

7. The Start Time for Occupied 1 will be displayed. Use the UP ARROW

and DOWN ARROW buttons to raise or lower the time until the desired

Start Time is shown. Press the Mode button to continue. See

Fig. 6.

8. The Stop Time for Occupied 1 will be displayed. Use the UP ARROW

and DOWN ARROW buttons to raise or lower the time until the desired

Stop Time is shown. Press the Mode button.

Fig. 5 — Setting Occupied 1 Set Points

9. The On/Off icon will be displayed. Use the UP ARROW to turn the Oc-

cupied 1 period ON for this day. Use the DOWN ARROW to turn the

Occupied 1 period OFF for this day.

10. Repeat Steps 2 through 9 to program the remaining schedule for occu-

pied periods 2 and 3 (if selected in Step 1).

11. The Copy command can be used to copy the previous day’s schedule if

the schedules are the same. The copy command becomes available after

all the occupied periods are programmed in a day. Use the UP ARROW

to change the copy command toYES. Use the DOWNARROW to change

the copy command to NO. Press the Mode button when the choice has

been made. See Fig. 7.

If NO was selected, the schedule will automatically change to the next

day and the user must enter the occupied and unoccupied schedules for

that day.

NOTE: Occupied 1 schedule heating and cooling set points are the same

for each day. Occupied 2 and 3 set points may be set to different values

for each day of the week.

If YES was selected, the schedule will be copied to the next day. The

schedule copy may be repeated until Sunday is reached. The Sunday sched-

ule cannot be copied to Monday.

Fig. 6 — Start Time Display

Table des matières

Autres manuels TOTALINE Thermostat

TOTALINE

TOTALINE Programmable Thermostat Instructions de montage

TOTALINE

TOTALINE P474-1020 Manuel utilisateur

TOTALINE

TOTALINE BASIC 1H Manuel utilisateur

TOTALINE

TOTALINE P374-1 900 Manuel utilisateur

TOTALINE

TOTALINE P374-1 700 Manuel utilisateur

TOTALINE

TOTALINE 1 For All Manuel utilisateur

TOTALINE

TOTALINE P374-1500 Manuel utilisateur

TOTALINE

TOTALINE Easy 1H/1C Manuel utilisateur

TOTALINE

TOTALINE 1 For All Manuel utilisateur

TOTALINE

TOTALINE P374-2900 Manuel utilisateur

TOTALINE

TOTALINE TST-EGND06413SCS09 Manuel utilisateur

TOTALINE

TOTALINE P374-2200FM Manuel utilisateur

TOTALINE

TOTALINE Easy 1H/1C Manuel utilisateur

TOTALINE

TOTALINE P374-2 700 Manuel utilisateur

TOTALINE

TOTALINE P374-2700 Manuel utilisateur

TOTALINE

TOTALINE P710U-21PHP Manuel utilisateur

TOTALINE

TOTALINE 1 For All Manuel utilisateur

TOTALINE

TOTALINE P374-1000 Manuel utilisateur

TOTALINE

TOTALINE EZ3 Manuel utilisateur

TOTALINE

TOTALINE TOTALINE Gold P274-0100-C Manuel utilisateur

TOTALINE

TOTALINE P/N P474-2150 Manuel utilisateur

TOTALINE

TOTALINE P710U--21NHP Manuel utilisateur

TOTALINE

TOTALINE Signature Mode d'emploi

TOTALINE

TOTALINE SIGNATURE CPV230 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur