Toshiba TRANSMEMORY U2P Manuel utilisateur
1
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Table of Contents
Chapter 1: Introduction......................................................................................2
Chapter 2:Required System Configuration .....................................................4
Chapter 3: How to Download the Security Software ....................................... 5
1. Connect the TransMemory™ USB U2P Flash Drive .............................. 5
1.1 Downloading the TransMemory™ Secure Software ......................... 5
Chapter 4: How to Use the Security Software..................................................7
1. Connect the TransMemoryTM USB 2.0 Flash Drive .................................. 7
1.1 Setting up the security software - adaptability .................................. 7
1.2 Setting up the security software........................................................ 9
1.3 Formatting using the security software ........................................... 11
2. Changing the Security Software Password and Log In/Log Out ............ 18
2.1 Changing the password using the security software ...................... 18
2.2 Logging into the Privacy Zone using the security software. ........... 20
2.3 Logging out of the Privacy Zone using the security software ......... 22
2
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Chapter 1: Introduction
Thank you for purchasing a TransMemoryTM USB Flash U2P Drive (“TransMemoryTM” or
“TransMemoryTM Flash Drive”). The device has the following features:
•This TransMemoryTM Flash Drive, featuring Toshiba’s NAND flash memory, can be used as
a removable disk for a personal computer.
•Toshiba TransMemoryTM Secure Software is available to allow password protection of
saved data.
•The TransMemoryTM Flash Drive is bus-powered, eliminating the need for an AC power
adapter.
Important Note: Please comply with all applicable laws regarding the treatment of copyrighted
material. Any copyrighted data saved on this device must be used only in accordance with
applicable copyright laws.
This document describes how to install and use the TransMemoryTM Secure Software. Before
installing or using this Software, please read this manual thoroughly to ensure correct use.
•The TransMemoryTM Secure Software works only when connected to one personal computer
•Do not activate IEEE1667 password protection and the TransMemoryTM Secure Software
simultaneously.
•When formatting TransMemoryTM Flash Drive using the Secure Software, do not subject it to
shaking/impact, turn off the power to your computer, restart your computer, or put it into the
Standby or Hibernate mode. If one of the above operations has been performed, please
reformat the TransMemoryTM Flash Drive using the TransMemoryTM Secure Software.
•The TransMemory™ Flash Drive may stop functioning properly if your computer is restarted
or resumed from Standby or Hibernate mode while the TransMemory™ Secure Software is
enabled and the Privacy Zone is in use. If one of these operations has been performed,
disconnect the TransMemory™ Flash Drive from your computer, reconnect it, and log back
into the Privacy Zone.
•If you are using the Windows Vista® operating system and have enabled ReadyBoost™ to
use the Public Zone, you may find at times that you are unable to log into the Privacy Zone. If
this happens, disable ReadyBoostTM, disconnect the TransMemory™ Flash Drive from your
computer, reconnect it, and log back into the Privacy Zone.
•If you are using the Windows Vista® operating system, do not enable ReadyBoostTM to use
the Privacy Zone.
•The images depicted in this manual may differ from the actual product.
•The design, specifications, product manual, and related information are subject to change
3
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
without notice.
■Trademarks
•Microsoft®, Windows®, Windows Vista® and ReadyBoostTM are trademarks, registered in
the United States and other countries, of Microsoft Corporation of the U.S.
•Intel® and Pentium® are trademarks or registered trademarks of Intel Corporation in
various nations.
•Other companies and products mentioned herein are trademarks or registered trademarks
of their respective owners.
4
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Chapter 2: Required System Configuration
The following are required to properly operate this product:
■Required hardware
•CPU: Intel Pentium II 266MHz or higher
•Available hard disk space of at least 800 KB
•USB Specification-compliant USB port (Operation on self-built or modified personal
computers cannot be guaranteed.)
■Required operating systems
•Microsoft® Windows® 2000 Professional Service Pack 4 or greater
•Microsoft® Windows® XP Professional Service Pack 2 or greater
•Microsoft® Windows® XP Home Edition Service Pack 2 or greater
•Microsoft® Windows Vista® Ultimate
•Microsoft® Windows Vista® Enterprise
•Microsoft® Windows Vista® Business
•Microsoft® Windows Vista® Home Premium
•Microsoft® Windows Vista® Home Basic
•Microsoft® Windows® 7 Ultimate
•Microsoft® Windows® 7 Enterprise
•Microsoft® Windows® 7 Professional
•Microsoft® Windows® 7 Home Premium
•Microsoft® Windows® 7 Home Basic
•Microsoft® Windows® 7 Starter
For Microsoft®Windows®XP or Microsoft®Windows®2000, be sure to first log in as a user
belonging to the Administrator’s group. If attempting to log in as a User, an error may result.
Note: The TransMemoryTM Secure Software does not work with any operating system other than
Microsoft®Windows®systems listed above.
5
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Chapter 3: How to Download the Security Software
Please follow the instructions below to download the TransMemoryTM Secure Software.
■1. Connect the TransMemory™ U2P Flash Drive
Before downloading the security software, connect the TransMemoryTM Flash Drive to the
computer. Close all other applications.
■1.1 Downloading TransMemoryTM Secure Software
1) Access www.digitalmedia.toshiba.com.
2) Click on the “TransMemoryTM USB U2P Secure Software and Installation Manual” link.
3) Then click on the “TransMemoryTM U2P Secure Software v305” link.
4) Read and agree to the End User Software License Agreement and click the Download
button.
5) Click on “Save” in the dialog box, as shown below
6
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
6) A dialog box asking where the software is to be saved appears. Select on “Desktop”.
7) When the download is complete, the following dialog box appears. Click on “Close”.
8) On the desktop, the downloaded software named “TransMemory_Secure305.exe” appears
as a new executable file.
7
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Chapter 4: How to Use the Security Software
This chapter describes how to use the TransMemoryTM Secure Software. Be sure to follow the
instructions for correct installation.
Important Note: Before following the instructions below, please back up any data stored in the
TransMemoryTM Flash Drive that you wish to save. All data may be lost when formatting
TransMemoryTM for the Privacy Zone. Toshiba assumes no liability for destruction or loss of data
stored on TransMemoryTM for any reason.
■1. Connect the TransMemory USB U2P Flash Drive
Please connect the TransMemoryTM Flash Drive to your computer before executing the
TransMemoryTM Secure Software.
■1.1 Setting up the Security Software – Adaptability Check
1) Double click on the “TransMemory_Secure305.exe” security software icon to start up the
security software.
2) Some types of TransMemory TM USB Flash Drives will show the dialogue boxes below.
Click “Check” when below dialogue box appears.
8
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
Click “OK” on the dialogue box below.
Click “OK” on the dialogue box below.
Disconnect the TransMemory™ from the PC. These dialogues boxes will not appear once this
protocol is completed.
9
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB U2P FLASH DRIVE
1.2 Setting up the Security Software
1) Double click on the “TransMemory_Secure305.exe” security software icon to start up the
security software.
2) When the following dialog box appears, click on “OK”.
If English is not selected, click on the downward-pointing arrow and select English.
Table des matières
Autres manuels Toshiba Stockage
Toshiba
Toshiba M.2 2242 PCIe NVMe Instructions d'utilisation et d'entretien
Toshiba
Toshiba STOR.E TV Manuel utilisateur
Toshiba
Toshiba CANVIO BASICS Manuel utilisateur
Toshiba
Toshiba MK8007GAH Manuel utilisateur
Toshiba
Toshiba HDTB420EK3AA Manuel utilisateur
Toshiba
Toshiba Canvio AeroCast Manuel utilisateur
Toshiba
Toshiba HDTC910EK3AA Manuel utilisateur
Toshiba
Toshiba FlashAir W-04 Instructions et recettes
Toshiba
Toshiba MK4004GAH Manuel utilisateur
Toshiba
Toshiba FlashAir W-02 Series Manuel utilisateur
Toshiba
Toshiba Canvio AeroCast Manuel utilisateur
Toshiba
Toshiba 512E Manuel utilisateur
Toshiba
Toshiba microSDHC UHS-? Manuel utilisateur
Toshiba
Toshiba MK6025GAS Manuel utilisateur
Toshiba
Toshiba CANVIO AEROMOBILE Manuel utilisateur
Toshiba
Toshiba W7 Series Manuel utilisateur
Toshiba
Toshiba STOR.E BASICS 2.5" Manuel utilisateur
Toshiba
Toshiba MK5056GSY Guide de configuration
Toshiba
Toshiba SATA MK1231GAS Manuel utilisateur
Toshiba
Toshiba 593209-A0 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur