Toshiba TDP-S9 Manuel utilisateur

Others Maintenance Operations Preparations Before Using

OWNER’S MANUAL

DATA PROJECTOR

TDP-S9 (SVGA)

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES

ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold with

this product, will expose you to lead, a chemical known to the State of California

to cause birth defects or other reproductive harm.

Wash hands after handling

WARNING: This [product] contains mercury. Disposal of mercury may be regulated due to

environmental considerations. For disposal or recycling information, please contact

your local authorities or the Electronic Industries Alliance: www.eiae.org.

USA only

MODEL NAME: TDP-S9

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-S9

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

USA only

SAFETY PRECAUTIONS

Before Using

USA only

Before Using

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

WARNING: Changes or modifications made to this equipment, not expressly approved

by Toshiba, or parties authorized by Toshiba, could void the user’s authority

to operate the equipment.

Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

CANADA only

USA only

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can

result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you

if you observe the following procedures for installation, use and servicing. This unit is fully

transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read the

owner's manual carefully, and follow

all the operating and other

instructions.

2. Power Sources

This product should be operated only

from the type of power source

indicated on the marking label.

If you are not sure of the type of power

supply to your home, consult your

product dealer or local power

company.

For products intended to operate from

battery power, or other sources, refer

to the operating instructions.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from the

lamp may cause damage to your eyes

or sight.

4. Ventilation

Openings in the cabinet are provided

for ventilation and to ensure reliable

operation of the product and to protect

it from overheating, and these

openings must not be blocked or

covered.

The openings should never be

blocked by placing the product on a

bed, sofa, rug or other similar surface.

This product should not be placed in a

built-in installation such as a bookcase

or rack unless proper ventilation is

provided or the manufacturer's

instructions have been adhered to.

Before Using

5. Heat

The product should be situated away

from heat sources such as radiators,

heat registers, stoves, or other

products (including amplifiers) that

produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming

pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be routed

so that they are not likely to be walked

on or pinched by items placed upon or

against them, paying particular

attention to cords at plugs,

convenience receptacles, and the

point where they exit from the product.

9. Overloading

Do not overload wall outlets; extension

cords, or integral convenience

receptacles as this can result in a risk

of fire or electric shock.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

10. Lightning storms

For added protection for this product

during storm, or when it is left

unattended and unused for long

periods of time, unplug it from the wall

outlet. This will prevent damage to the

product due to lightning and power-

line surges.

However, while it is thundering or

lightning, do not touch the apparatus

and any connected cable and/or

equipment.

This will prevent you from receiving

the electric shock by an electric surge.

11. Object and Liquid Entry

Never push objects of any kind into

this product through openings as they

may touch dangerous voltage points

or short-out parts that could result in a

fire or electric shock. Never spill liquid

of any kind on the product.

12. Do not place the product

vertically

Do not use the product in the upright

position to project the pictures at the

ceiling, or any other vertical positions.

It may fall down and dangerous.

13. Stack Inhibited

Do not stack other equipment on this

product or do not place this product on

the other equipment. Top and bottom

plates of this product develops heat

and may give some undesirable

damage to other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

Before Using

15. Accessories

Do not place this product on an

unstable cart, stand, tripod, bracket, or

table. The product may fall, causing

serious injury to a child or adult, and

serious damage to the product. A

product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the product and cart

combination to overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall

outlet and refer servicing to qualified

service personnel under the following

conditions:

a) When the power-supply cord or plug is

damaged.

b) If liquid has been spilled, or objects

have fallen into the product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operating instructions as an improper

adjustment of other controls may

result in damage and will often require

extensive work by a qualified

technician to restore the product to its

normal operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a distinct

change in performance - this indicates

a need for service.

17. If glass components,

including lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and a

lamp. If such parts should break,

please handle with care to avoid injury

and contact your dealer for repair

service. The broken pieces of glass

may cause to injury. In the unlikely

event of the lamp rupturing, thoroughly

clean the area around the projector

and discard any edible items placed in

that area.

18. Servicing

Do not attempt to service this product

yourself as opening or removing

covers may expose you to dangerous

voltage or other hazards. Refer all

servicing to qualified service

personnel.

19. Replacement Parts

When replacement parts are required,

be sure the service technician has

used replacement parts specified by

the manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result

in fire, electric shock, or other

hazards.

(Replacement of the lamp only should

be made by users.)

20. Safety Check

Upon completion of any service or

repairs to this product, ask the service

technician to perform safety checks to

determine that the product is in proper

operating condition.

21. Do not leave thermal-paper

documents or easily

deformed items on top of the

unit or near the air exhaust

for long periods of time.

The heat from the unit could erase the

information on the thermal paper, or

cause deformation or warping.

22. Do not use the product in a

closed installation state.

Do not place the product in a box or in

any other closed installation state.

Otherwise it may overheat. This could

result in a risk of fire.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Before Using

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 – 240V

200 – 240V

Plug

configuration Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your

projector. For maximum protection, repack the set as it was originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the

unit is exposed to such a change in temperature, moisture may condense on the crucial internal

parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is

an extreme or sudden change in temperature

Place and Manner of Installation

•Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction,

and shorten the life of the projector.

•Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their

lives, and darkening the screen.

• Do not use the product vertically in any upright position or slantwise in an angle of 20 degrees or

more.

•Using this instrument near a TV or radio may cause interference to the images or audio sound. If this

happens, move it away from the TV or radio.

•Moving the projector from a low-temperature room to a high-temperature room may cause

condensation on the lens or internal parts in the instrument. If you continue to use it in that situation,

the malfunction may result. Ensure to wait until the condensation naturally disappears.

•In a high altitude location where air is thin, cooling efficiency is reduced so use it with the ambient

temperature being lowered.

POWER SUPPLY CORD SELECTION

EXEMPTION CLAUSES

•Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster

such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, operation, theft or

mischief by third parties, other accidents, or use under abnormal conditions including erroneous or

improper operation and other problems.

•Toshiba Corporation bears no responsibility for incidental damages (lost profit, work interruption,

corruption or loss of the memory contents, etc.) arising from the use of or the inability to use this

unit.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from not having

followed the descriptions in this Instruction Manual.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions

arising from combination with equipment or software that is not related to Toshiba Corporation.

IMPORTANT PRECAUTIONS (Continued)

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic

products touching the unit for a long time. They will leave marks on the finish.

If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

Autres manuels pour TDP-S9

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Toshiba Projecteur

Toshiba

Toshiba TDP-F10U Manuel utilisateur

Toshiba

Toshiba TDP-T40 Manuel utilisateur

Toshiba

Toshiba TDP-S9 Instructions d'installation

Toshiba

Toshiba TDP-T99U Manuel utilisateur

Toshiba

Toshiba TDP-SW20 Manuel utilisateur

Toshiba

Toshiba TDP-TW95 Manuel utilisateur

Toshiba

Toshiba TDP-P5 Manuel utilisateur

Toshiba

Toshiba TLP-X3000U Manuel utilisateur

Toshiba

Toshiba TDP-S25U Manuel utilisateur

Toshiba

Toshiba TDP-T45U - XGA DLP Projector Manuel utilisateur

Toshiba

Toshiba TLP-681 Manuel utilisateur

Toshiba

Toshiba TLP-X10U Manuel utilisateur

Toshiba

Toshiba TDP-EX20 Manuel utilisateur

Toshiba

Toshiba TDP-T9 Manuel utilisateur

Toshiba

Toshiba TDP-TW355 Manuel utilisateur

Toshiba

Toshiba TLP-B2U Manuel utilisateur

Toshiba

Toshiba TLP-S10 Manuel utilisateur

Toshiba

Toshiba TDP-S3 Manuel utilisateur

Toshiba

Toshiba TLP-B2E Manuel utilisateur

Toshiba

Toshiba TDP-T30 Manuel utilisateur

Toshiba

Toshiba TLP-XC2500U Instructions d'installation

Toshiba

Toshiba TLP680U - SXGA LCD Projector Guide de référence

Toshiba

Toshiba TLP-B2ultra U Manuel utilisateur

Toshiba

Toshiba TDP-T420U - XGA DLP Projector Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur