©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner 3
Keep away from the rotating propellers and motors.
When folding, be sure to pay attention to the crushing danger.
Be sure to fly under the take-off weight of 58.90KG to avoid danger.
Operators must be professionally trained and pass the assessment, and
the untrained personnel must not fly the aircraft.
Make sure that the propellers are removed before calibrating the drone
and upgrading the firmware.
When the drone and the remote controller are in frequency-connecting
process, make sure that the propellers are removed and that human and
animals are far away from the motor.
A pilot should not operate this product in poor condition such as after
drinking, fatigue, illness, etc.
If the operating environment does not meet the working condition of the
radar module, the drone will not avoid obstacles when it returns
automatically. If the remote-control signal is normal, the flight speed and
altitude can be controlled by the remote controller.
When working, be sure to turn on the remote controller first, and then turn
on the power supply. After landing, turn off the power supply first and then
turn off the remote controller.
Please maintain the control of the drone throughout the process, and do
not rely entirely on the information provided by the hand-held ground
station.
Obstacle avoidance and terrain following functions will not be available in
the specific flight mode or flight environment. Please observe the attitude
of the drone at all times and judge the flight condition reasonably to avoid
obstacles in time.
5. Flight Restrictions and Local Laws
Browse the official website of the Aviation Authority of your location for the
latest list of restricted flight areas.
The maximum control flight altitude is below 20 meters. Please consult the
local flight management department before taking off, to comply with local
laws and regulations.
Special precautions: Safety operating instruction notes includes but not
limited to above items.
Intellectual property rights
The intellectual property rights of this product and its manual belong to
TopXGun Robotics Co., Ltd. Without written permission, any organization or
individual may not copy, reproduce and distribute them in any form. If quotation
is required, the source should be indicated and the manual should not be
modified, deleted or quoted contrary to its original intention.
About this manual
This manual is used as user’s guidance. Photos, graphics, charts and
